Farm Supplies Machinery & Equipment

Series 39 Hydraulic folding wing frame with 6 section folding S44 Broadacre Stump Jump Harrow. 5.1m coverage. Transport width: 3.6m.
Please note that 3 point linkage pins are not supplied.
Murray Series 39 Hydraulic Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 39 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and hydraulic folded wings.
Murray Series 39 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 39 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 5.1M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions.
The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

Series 38 Manual winch folding wing frame with 6 section folding S08 Stump Jump Harrow. 5.18m coverage. Transport width: 4.52m.
Please note that 3 point linkage pins are not supplied.
Murray Series 38 Folding Harrow Frames provide a solution to the transportation of multiple Harrow sections.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Series 38 Folding Harrow Frames are supplied complete with centre section, wing attachments and all rings and links to suit your harrow type and size.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 5.18M MANUAL FOLDING FRAME STUMP JUMP HARROW

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3680kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 4.33m (14ft 3inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 36 PLATE X 26 INCH DISCS - 0962

8ft Twin Rotor Slasher (Galvanised) - suit 70-100hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Bare-Co components are readily available from all good machinery dealer outlets located Australia wide
Key Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 6mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 100 HP Centre gearbox.
- Bare-Co 75 HP Outer gearboxes.
- 2 Year Gearbox Warranty
- Bare-Co slip clutch
- Bare-Co Series 8 PTO shaft
- Front and rear safety chains
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on
material flow
- Bare-Co gearbox/slip clutch safety guarding
- Reinforced A-frame for strength and functionality
- Optional wheel kits available (two-wheel kits are recommended for the 8ft slasher)
Specifications:
- Recommended Tractor (HP) - 70-100
- Cutting Width (mm) - 2,400
- Overall Width (mm) - 2,690
- Approx weight = 980 kg
- Number of Blades - x4 - LH Suction Lift style approx 2.62 kg (each)
- Blade Tip Speed (m/s max.) - 99
- Deck Thickness (mm) - 6
- 3-Point Hitch - Category Two
- Gear Box / Capacity - Bare-Co 1:1.93 / 100HP
- Bare-Co 100HP slipclutch & series 8 PTO shaft
- Grass Discharge - Rear Discharge
- Blade Carrier - Cutter Bar
- Optional Wheel Kit(s) - Twin kit available
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 8FT TWIN ROTOR GALVANISED SLASHER, SUIT 70-100HP

Series 38 Manual winch rigid frame with 2 section rigid S44 Broadacre Stump Jump Harrow. 1.72m. Transport width: 2.68m.
Centre Frame only, no wings, winch, locking pins or hinges included.
Please note that 3 point linkage pins are not supplied.
Designed to fit Category I or II three-point linkage systems, Murray Series 38 Harrow Frames allow transport between paddocks and through smaller sized gates.
Each unit features a top class frame designed and backed by Murrays years of experience.
Simplicity and strength are combined in a compact frame utilising a rigid linkage-mounted centre section and manually folded wings.
Murray Series 38 Harrow Frames suit Category C Harrows including Series 04 Diamond Harrow sections and Series 08 Stump Jump Harrow sections.
Specifications:
- Main Frame 50 x 50 x 5 RHS
- ALKO 350kg Brake Winch. 4 section frame comes with 1 - Brake Winch as standard. 5 and 6 section frames come with 2 Brake Winches as standard.
- Lock out hinge mechanism
- Anchor points to suit desired Harrow
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.59M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60 -130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1650kg
No of bearings: 6
No of axles: 2
Cutting width: 2.3m (7ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

For quick response, the compact Fire Marshal Plus with hose reel is perfect for quickly loading into your UTV in emergency situations.
Features:
- Dimensions: 910L x 730W x 1035H mm
- Weight: 39.7kg
- With GX35 Honda motor 3-year warranty
- 120L/min 75psi fire fighting pump with 1-year warranty
- 250L UV-stabilised poly tank 15-year warranty
- Hose reel with 36 metres of 19mm hose with 3-year warranty
- Carry handles
- Adjustable fire fighting nozzle
- Compact moulded design with tie-down points at front and rear
- 250mm screw lid
- Anti-spill lip around lid opening
- Front drain bung.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID SPRAY 250L FIRE MARSHAL PLUS FIRE FIGHTING UNIT (WITH HOSE REEL)

4.19m Murray Series 03 Levelling Harrow 5 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3709 - 4.19m (13ft 9in) (20 Row) 2/15 Tine, 3/20 Tine - 98kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 5 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The Nobili rear mount BPR series mulchers are multi-purpose machines ideal for pasture topping with double hitch that fits to the front or rear of the tractor and hydraulic side shift. Suited to tractors up to 175HP with cutting height maintained by rear roller.
Features:
Suggested Use: Grass mowing and green prunings up to 75mm in diameter.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with over running clutch, taper locked pulleys and electronically balanced 8 row rotor.
Control: Hydraulic side shift.
Attachment: Cat. II three point linkage, floating top link.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
Tractor HP: 80-150 HP
Blades (Cast Hammers): 24
Working Width (mm): 2374
Product Weight (kg): 900
Dimensions WxHxD (mm): 2517W 550H 1300D
NOTE: There is a $770.00 surcharge for machinery assembly and blade changes (Excludes price of blades).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.37M BPR MULCHERS (80-150HP)

The Munro AutoDriver is the machine of choice for contractors, vineyard operators and government departments. Available in this model 730, 900 or a 1300 version. 730 means 730 Joules (impact) of energy up to 950 times per minute.
Capable of installing posts up to 8ft (Standard) and 11ft for this TeleSett model, the AutoDriver combines in one machine, a fast action rock-breaker style hammer that does not leave the top of the post when driving and an hydraulic auger for drilling pilot holes.
The AutoDriver has a patented down force system that can add a percentage of the tractor mass to the driver, making it the most efficient machine on the market. Without this down force system, these types of machines lose most of their efficiency trying to drive the machine up instead of the post down.
The AutoDriver driving function is a one handed operation allowing operators to adjust the machines tilt whilst driving to ensure a straight post. The auger is hydraulically engaged and stowed and can have down force applied.
The system is easy to operate. Its speed and accuracy of setting makes it the most efficient and value-for-money machine on the market.
Combines in one machine, a fast action earth auger for drilling a pilot hole, with a powerful post driver for setting a tight post every time.
Handles all types of posts with ease...
Steel
Star
Treated pine
Concrete
Split
Square
Round
Railway sleepers
Powerful, Flexible, Tough
The safest and most efficient machine on the market
Automatic hammer does not leave the top of the post.
Single handed hammer and combined down force operation
Hydraulically engaged auger
Hydraulic reversible auger drive with a wide range of augers for different post sizes and ground conditions.
Drills to 1200mm (4)
Forward, aft and sideways tilts combined with a wide base and two separate stability pads allows safe and efficient operation on hills or sloping ground.
Precise ergonomically located controls allow posts to be set quickly and accurately without fuss.
Has low overall height but still copes with normal posts
Firm and Fast post setting, with feather touch controls
Comes in telescopic version for taller posts
Optional Items include...
TAD (Tractor Added Down force to deliver full energy
Power Pack Kit with Oil Cooler
Side Shift
Double Side Shift
Guide Rings per ring
FenceMate Hydraulic wood borer
Skid Steer attachment plate
Guide ring carrier
FEL mounted wire winder (Euro Hitch)
Augers : sizes available from 70mm - 305mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO 1300 AUTODRIVER TELESCOPIC POST DRIVER

Features:
90 HP single speed gearbox.
1850mm working width.
Side gear drive.
CE safety guards.
48 x C Blades.
Cat I or II, three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 50-90 HP
Working Width: 1850mm
Working Depth: 100-200mm
Product Weight: 550kg
Total Width: 2100mm
Options:
Front Depth Wheels
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 1.85M B85 ROTARY HOE (MIN 50-90HP)

Find Farm Machinery For Sale. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

MURRAY 5.1M HYDRAULIC FOLDING FRAME BROADACRE STUMP JUMP HARROW

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

MURRAY 5.18M MANUAL FOLDING FRAME STUMP JUMP HARROW

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 36 PLATE X 26 INCH DISCS - 0962

SOUTHERN CROSS AG MACHINERY 8FT TWIN ROTOR GALVANISED SLASHER, SUIT 70-100HP

MURRAY 2.59M MANUAL RIGID FRAME BROADACRE STUMP JUMP HARROW

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

RAPID SPRAY 250L FIRE MARSHAL PLUS FIRE FIGHTING UNIT (WITH HOSE REEL)

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 5 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

NOBILI 2.37M BPR MULCHERS (80-150HP)

MUNRO 1300 AUTODRIVER TELESCOPIC POST DRIVER

BREVIGLIERI 1.85M B85 ROTARY HOE (MIN 50-90HP)

Farm Supplies Machinery & Equipment

Dealer Address