Farm Supplies Machinery & Equipment

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2190kg
No of bearings: 12
No of axles: 6
Cutting width: 3.2m (10ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 5MM SCALLOP DISCS - 0852

A Smooth Rust Resistant Capping.
Looking for a smooth finish for your round fence post? Our round post caps will stop water getting in and corroding your steel posts.
Our post caps stop water and spiders from getting into your posts. Just put them on top of your post and hammer them on with a rubber mallet. Its that simple.
Each galvabond round post cap is made from quality steel to ensure a long lasting and strong cap.
Each cap has little ridges on the inside, which means once the cap is on, it wont come off.
What is A Galvabond Finish?
Wondering what a galvabond finish is? What's the difference between a galvanised cap versus a galvabond cap?
A galvanised product, is when the product is made then hot dipped galvanised.
A galvabond cap is created when we get a pre-galvanised sheet and punch the cap out. This creates a lot smoother finish, yet still remains corrosion resistant.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Specifications:
- 65NB
- 76mm Post O.D
- Galvabond
Features:
- Smooth finish
- Won't come off
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 65NB ROUND POST CAP SUIT (76MM POST O.D) - RPC065

Rigid box construction rotary hoes suitable for ground preparation on small farms and market gardens.
Features:
40 HP single speed gearbox.
850mm working width.
Side chain drive with auto tensioner.
16 x C blades.
Cat I or II three point linkage.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Connection Type: Linkage
Min Tractor PTO HP: 15-40 HP
Working Width (mm): 850
Working Depth (mm): 50-150
Product Weight (kg): 155
Total Width (mm): 990
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BREVIGLIERI 0.85M B40F ROTARY HOE (MIN 15-40HP)

X300 Sheen Flame Gun Spare Parts:
(X300-3) - Pump Rod Washer (and Filler Cap Washer)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHEEN SHEEN FLAME GUN X300 - PARTS - WASHER - SHEEN - X300-3

Male Thread = 3/4" BSP
Thread Length = 17 mm
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3/4" MALE PLUG

A rechargeable LED Flashlight that is super bright, with no replacement batteries required.
Lumens = 2,000
Length = 165 mm
Width = 40 mm
Weight = 0.21 kg
Lithium Battery - 4,000 mAh
Light Patterns - High, Low, Strobe. Run time for each shown below...
High: 2.5 hr
Low: 4 hr
Strobe: 6 hr
USB Charging Cable with Magnetic Connection = 800 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN RECHARGEABLE LED LIGHT (2,000 LUMENS)

Australian Made to suit the harsh Australian environment
Weighing 13.5kg for the CHPD52 and 15.5kg for the CHPD78, both models are lightweight and portable but still able to drive posts as swiftly as much larger and heavier hydraulic and pneumatic tools.
The high impact hammer action of 1720BPM will drive steel fence pickets into the hardest ground in a matter of seconds and the portable design allows operators to move along a fence line with ease. The driver uses an efficient Honda GX35 4-stroke motor to give the best service life possible.
The CHPD52 (this model) has a 52mm receiver guide tube which allows most standard posts and pipe up to 50mm diameter, as well as timber 35mm square to be driven, while the CHPD78 (next size model) has a redesigned lower hammer section to allow much larger posts and pipe to be driven right up to 75mm diameter without any other adapters.
Blows Per Minute - 1720
Joules - 26
KW - 1.0 (1.3hp) at 7,000 rpm, 4-stroke, overhead cam Trigger throttle with integrated stop button, Spring isolated hand grips
Fuel Consumption - 0.71 L/h at 7,000 rpm. Meets strictest worldwide emission and noise requirements
Starting System - recoil (pull start)
Rating - Continuous use on standard posts
Weight - 13.5kg
Engine Warranty - 3 Year genuine Honda warranty
Post Driver Warranty - 12 months parts failure
Noise Level - 100dB Hearing protection required
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown. Prices are correct at time of posting the ad, but are still subject to change. E & OE

CHRISTIE CHPD52 - 52MM POST DRIVER

Specifications:
Market: Viticulture.
Tank Size = 3,500 L
Connection Type: Trailed
Rows = 2
Min PTO hp: 60
Pump Size : 500+ LPM
Application: Vineyards
Dimensions - Length measured with linkage hitch:
Length: 5,640 mm
Width Less Head: 1,935 mm
Width Folded: 2,605 mm
Height: 3,630 mm
Weight 1,100 kg (Dry)
Includes spray heads, independent 320mm hydraulic fans, hydraulic drive stainless steel pump, automatic spray rate controller, self contained hydraulic drive system and tandem suspension axle. Ideal for vineyards.
Model Specifications
- Head Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Left and right arms are independent hydraulic folding with adjustable width and centre frame. Boom frame is galvanised.
- Pump Multi-stage hydraulic drive pump, multiple impellers made with highly resistant engineering plastic for excellent chemical compatibility. 500+L/min. Driven by tractor remotes.
- Fan Size 320mm turbine fan, one per air tube, 3600rpm. Power consumed 29kw/38HP.
- Hydraulic Control Hitch mounted hydraulic power pack with: 40L oil reservoir with cartridge particulate filter, motors fitted with case drain, hydraulic distribution block incorporates anti-cavitation and pressure relief valves, 12V oil cooler.
- Nozzles Air shear.
- Controls Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
- Tank Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
- Frame Galvanised steel chassis, linkage hitch fitted with hydraulic power pack.
- Agitation Venturi agitator.
- Filtration Lid strainer and large capacity suction filter.
- Wheel Equipment Tandem suspension with 10x15inch wheels and tyres.
- PTO Driveshaft Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
- HP Required Minimum 60 PTO HP
Factory Options
- Hydraulic pump driven through power pack.
- Hydraulic Height Adjustment phased or independent.
- Hydraulic Row width adjustment phased or independent.
- Bravo 180S spray rate controller with hydraulic controls (in lieu) up to 5 sections.
- Bravo 180S spray rate controller with hydraulic controls (in lieu) 7 sections.
- Bravo 400S automatic rate controller with GPS guidance (in lieu) 7 spray sections.
- Bravo 400S automatic rate controller with hydraulic controls, GPS guidance (in lieu) 7 spray sections + 7 hydraulic sections.
- IBX 100 ISOBUS controller (in lieu requires compatible in-cab console).
- Delta 80 Universal Terminal to suit ISOBUS control.
- Quick turning hitch.
- Electric braked tandem suspension axle via trailer plug in lieu of standard axle.
- Hydraulic braked tandem suspension axle in lieu requires compatible tractor remotes.
- 100L Flush Tank
- Road Kit Brake and indicator lights with folding Oversize sign.
- Tail Light Kit Brake and indicator lights via trailer plug.
NOTE: Not all options will fit all models. Extra charges may apply to fitment of some options.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 3,500L (2 ROW) TRAILED SCRAM CROSS - MIN 60PTO HP

11,260L Slurry Tanker - recessed axle.
Premium slurry tanker with recessed axle and tyres for where flotation is an issue and low ground pressure is needed. Ideal for contractors and large dairy farmers.
Specifications:
Capacity (L) - 11,260
Overall Length (mm) - 6,660
Unladen Weight (kg) - 4,000
Features:
Parabolic leaf sprung drawbar
500/60 x 22.5 flotation tyres
MEC 9000 l/min ballast pump
LED road lights
Wide angle driveshaft
Double trap system
Relief valve
Pressure gauge
Front sight tube
Rear sight glass
4 x 6" filing points
1 x 6" manual parallel hose quick coupler
Brackets to retro fit autofill (6")
Manual gate valve for filling
Hydraulic rear valve for empting
Inverted splash plate
12m of 6" hose (2 x 6m lengths)
Side hose carrying brackets
Rear inspection hatch (20")
Hydraulic brakes
Swivel hitch
Winding jack
Handbrake
Safety chains on drawbar
6" bottom outlet
50mm rear tap
10 year steel warranty
Pressed dome ends
6mm EN42 high carbon steel
High glass painted finish
Models:
AB 2250R 10,460 Capacity 6660mm Length 3,700kg Weight
AB 2250R 11,260 Capacity 6660mm Length 4,000kg Weight
AB 3000R 13,840 Capacity 7500mm Length 4,680kg Weight
Options: 6 and 8" autofill arms for quick and easy filling - available ex stock. Side or mid-mount available. Standard with double flex joints. Range of other options available, ex factory.
Autofill options:
6" side autofill c/w docking station (SD & R series tankers)
6" turbo filler for autofill arm
8" side autofill c/w docking station (Tandem/Tri-Axle series tankers)
8" turbofiller for autofill arm
Options (In Lieu of Standard):
11,000 litre pump on lieu of 9,000L (AB1600 / 2000SD)
13,500 litre pump on lieu of 9,000L (AB1600 / 2000SD)
Hydraulic remote control for pump
Galvanised tank (AB1600 / 2000SD)
Galvanised tank (AB2250R / 2500R)
Galvanised tank (AB3000T / 3500T / 4000T)
8" hose + couplings in lieu of 6" (SD + R series tankers)
Extra 6m 6" hose c/w fittings
Extra 6m 8" hose c/w fittings
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ABBEY 11,260L RECESSED AXLE SLURRY TANKER

The JACKY Mini Storage Silos and Hoppers are the ideal solution for stationary storage of smaller quantities of grain and feed.
Complete with our unique rustproof discharge system, these hopper units help to protect valuable contents (grain, feed etc.) against vermin and weather damage.
The elevated storage hopper allows you to fill buckets or containers directly from the mini silo.
Australian made and owned.
Specifications:
Capacity (kg): 640
Length (mm): 1,180
Width (mm): 1,180
Height (mm): 1,750
Benefits:
- 915 litre capacity.
- Safe Working Load (SWL) - 1200kg.
- Centre discharge hopper.
- UV stabilised polyethylene and stainless steel bin.
- Heavy-duty galvanised steel frame ensures longevity.
- Slide on lid design for weather resistance.
- Standard colour is Faint Green.
- Serial numbering and custom branding available.
Options:
- Raimo bulk bag dispenser
- Reaper knife blade
- Document holder heavy duty
- Tine pocket 1,000mm (folded 200mm x 100mm)
- Transition nozzle piece
- Actuator kit 12 volt
- Clear sightglass point in face of Jacky bin
- Hatch assembly
- Garnet outlet
- Base poly
- Lid to suit
- Eurohitch attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JACKY STORAGE 915L RAISED CENTRE DISCHARGE MINI SILO (STEEL BASE)

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 12
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
1.2m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.2M S-TINE (12 TINES) STANDARD CULTIVATOR - MIN 24HP

Offering fork on & off functionality. These heavy duty galvanised skids protect the tank and are perfect for temporary use applications.
Standard components include:
- 6.5H.P genuine Honda-powered twin-impeller pump with electric starter
- 36m hose reel & fire-fighting nozzle
- Bottom fill manifold, with 6m suction hose
- Heavy duty galvanised skid frame
- Capacity 1,200 L
Dimensions: 1,900 L x 1,400 W x 1,100 H
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 1,200L SKID MOUNT TANK 6.5HP ELECTRIC START

Find Farm Machinery For Sale. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 24 INCH 5MM SCALLOP DISCS - 0852

ROTECH RURAL 65NB ROUND POST CAP SUIT (76MM POST O.D) - RPC065

BREVIGLIERI 0.85M B40F ROTARY HOE (MIN 15-40HP)

SHEEN SHEEN FLAME GUN X300 - PARTS - WASHER - SHEEN - X300-3

SILVAN 3/4" MALE PLUG

SILVAN RECHARGEABLE LED LIGHT (2,000 LUMENS)

CHRISTIE CHPD52 - 52MM POST DRIVER

SILVAN 3,500L (2 ROW) TRAILED SCRAM CROSS - MIN 60PTO HP

ABBEY 11,260L RECESSED AXLE SLURRY TANKER

JACKY STORAGE 915L RAISED CENTRE DISCHARGE MINI SILO (STEEL BASE)

JOHN BERENDS 1.2M S-TINE (12 TINES) STANDARD CULTIVATOR - MIN 24HP

POLYMASTER 1,200L SKID MOUNT TANK 6.5HP ELECTRIC START

Farm Supplies Machinery & Equipment

Dealer Address