Farm Supplies Machinery & Equipment

15,00L Cone Bottom Tank on Stand.
Specifications:
Total height: 3970mm
Inlet height: 3770mm
Diameter: 2500mm
Features:
15 degrees cone bottom and full drain bung for total evacuation of contents
Ribbed sidewall tanks for superior strength
Self supporting roof with no internal fixtures or supports
2" complete draining Banjo fitting installed on all tanks (Optional 3" available)
3 Positive tie down points / lifting lugs
Heavy duty galvanised steel frame (Complete stainless steel stands available on request)
Supplied in translucent green colour so level of contents can be seen (Also available in black)
450mm hinged & vented lid
Rated for 1.5SG liquids
Stand also available with forklift slippers for safe and easy lifting when empty.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 15,000L CONE BOTTOM TANK ON STAND

Tedder haytine.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GRANGE & WALTER TEDDER HAY TINE (LH) - 372MM LENGTH - REPLACEMENT FOR LELY

Electric start.
Builders and farmers find this generator ideal for general all-round performance with lots of grunt for welders, compressors and other heavy duty equipment (e.g. wool presses, medium sized and medium sized air conditioners). Featuring a 34 litre fuel tank built into the base and an electric starting system, this generator is a winner at home, on the Ute or in the shed.
Specifications:
Power Rating: 11 kVA
Model Rating 0.8pf @ 50Hz: 11 kVA
Alternator Rating: 11 kVA
Engine Model: Honda V Twin GX630
Phase: 1-Phase
Starting System: Electric
Fuel Tank Capacity: 34 L
Noise Level @ 7m: 75 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 8.84 L/hr
Operation Hours @ 80% Load: 7.11 hrs
Fuel Type: Petrol
Diam.: 876 x 546 x 700 mm (L x W x H)
Weight: 110 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 11 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

Powercut Anvil Lopper - 750mm.
These anvil loppers incorporate POWER®CUT, the new cutting head technology which multiplies the applied force making cuts even easier.
- The flat headed screws protect the tree from unnecessary damage to the bark.
- Ultra-lightweight aluminium tube handles
- Non-stick coated blades reduce the adhesion of sap to the blades cutting surface.
- Newly designed shock absorbing rubber buffers minimise the cutting impact as do the ergonomic soft grip handles.
- Manufactured for maximum durability with numerous easy to-replace wearing parts.
- One-blade or anvil technology conserves up to 20% of your strength. - Ideal for cutting dead and hard wood.
- Engineered for maximum durability.
- 45mm cutting capacity
Replacement blades and other spare parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WOLF LOPPER ANVIL POWERCUT- 750MM

450MM 4 Series Auger (Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 450MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Gate Valve specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX GATE VALVE WITH GAS HYDRAULIC RAM - DOUBLE FLANGED 6"

Top Link Knuckle End.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK KNUCKLE END (CAT 36MM)

18 LPM (12 Volt DC) Rule Submersible In Line Pump
LPM: 18 (1080 Lph)
Max head: 9.7m
1/2"Outlet Hose, 4.5 amps.
'Continuous'.*
C/w Pump, 4m Layflat Delivery
Hose, Nozzle and Battery Clips.
Fresh/Sea water to 80°C,
Diesel to 40°C
Marine ISO 8846
* Continuous Duty: E.g. up to approx. 2 hours per day. Longer run times shorten pump life.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

TOOLKWIP 18LPM (12 VOLT DC) RULE SUBMERSIBLE IN LINE PUMP - IL280PK (KIT)

500MM 4 Series Auger (Standard conditions- Tungsten Carbide) up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 500MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

300L SquatPak spraying tanks are available with 12V pumps and hose reels to provide a range of outputs to support general spot spraying. Their lower height and internal baffle make them ideal for use with UTVs. UV stabilised polytuff tank with Large baffle to reduce surge.
Screw down lid with strainer fill basket beneath. Large Drain outlet for easy empty and clean. Deep Tie-down locating channels for strap mounting and tank strength. Tanks feature durable accessory mounting points with large M10 inserts. One spare tank corner for additional accessories. Main image at top of page is SQ300-S7-2 model with 15mt spring retractable reel.
Specifications:
Tank Size (L): 300L
Pump Size (L/min): 7
Max pressure : 690 kpa / 120 psi
Height / Width / Length (mm): 890 / 1010 / 1060
Features:
- available in 300L and 400L
- 7L/min, 8 Bar/120psi premium quality 12V aquatec pump
- UV stabilised polytuff tank with internal baffle to reduce surging
- large drain outlet for easy empty and clean
- large screw down lid with 255mm strainer basket
- 300L model: 30m hose reel x 10mm agricultural delivery hose and atomiser spray gun
- 400L model: PA series spray gun with 500mm stainless steel extension lance, flat fan and hollow cone nozzles supplied
Options:
RP1-20 - 2m towbar boom
RP1-34 - boomless nozzle towbar booom
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time

SILVAN 300L SMOOTHFLO SQUATPAK PROFESSIONAL SPRAYER

Top Link Centre Tube.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPENCO TOP LINK CENTRE TUBE - 1 1/4" UNC, 381MM LENGTH

Lower Link Conversion Bush (Cat. 4 to 3).
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOWER LINK CONVERSION BUSH (CAT 4 TO 3) (ID: 37.55MM, OD: 50.80MM, OVERALL LENGTH: 71MM)

Find Farm Machinery For Sale. Browse 7660 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

RAPID PLAS 15,000L CONE BOTTOM TANK ON STAND

GRANGE & WALTER TEDDER HAY TINE (LH) - 372MM LENGTH - REPLACEMENT FOR LELY

GENTECH 11 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

WOLF LOPPER ANVIL POWERCUT- 750MM

DIGGA 450MM AUGER (HEAVY-HARD GROUND) FOR RAMDRILL PHD - HYDRAULIC DRIVE

SPAREX GATE VALVE WITH GAS HYDRAULIC RAM - DOUBLE FLANGED 6"

SPAREX TOP LINK KNUCKLE END (CAT 36MM)

TOOLKWIP 18LPM (12 VOLT DC) RULE SUBMERSIBLE IN LINE PUMP - IL280PK (KIT)

DIGGA 500MM AUGER (STANDARD-TUNGSTEN) FOR RAMDRILL PHD - HYDRAULIC DRIVE

SILVAN 300L SMOOTHFLO SQUATPAK PROFESSIONAL SPRAYER

SPENCO TOP LINK CENTRE TUBE - 1 1/4" UNC, 381MM LENGTH

SPAREX LOWER LINK CONVERSION BUSH (CAT 4 TO 3) (ID: 37.55MM, OD: 50.80MM, OVERALL LENGTH: 71MM)

Farm Supplies Machinery & Equipment

Dealer Address