Farm Supplies Machinery & Equipment

This Underground Rainwater Tanks give you the maximum capacity for the minimum square meterage. Out of sight with the smallest footprint in the industry.
Dimensions : 2,470 L x 1,640 W x 1,665 H
Capacity : 3,300 L
Features:
- Fully tested polyethylene tank designed to withstand ground and water pressure at depth.
- Engineered by geotechnical experts including Finite Element Analysis (FEA). These calculations are provided with the tanks.
Sealed locking tamper proof lid.
- Anti-flotation design and engineering specifications completed to AS1170.
- Certified to AS/NZS 4766 Rainwater tank standard
- The underground tank houses an 80LPM submersible pump delivering high volume and pressure suitable for most gardens.
Filter Features:
- Self cleaning captures more than 90% of water while cleaning your filter as well
- Withstands up to 30 tonnes of vehicle weight
- Extension risers available for deeper underground installation
- Vortex Filter for roof area up to 200 square metres with 100mm pipe entry
Garden Pump Features:
- Fully automatic pressure system
- Run dry protection
- In-built electronic controls
- Automatic reset
- Quiet operation
Technical Data:
- Voltage: 220-240 v
- Max power: 0.37 kW
- Inlet Rainwater: 1 BSP (female)
- Inlet Mains Water: 1 BSP (female)
- Discharge outlet: 1 BSP (female)
- Litres per minute: up to 82 LPM
Warranty - 2 years manufacturers warranty on pump
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 5,000L UNDERGROUND TANK INC GARDEN PUMP & FILTER

A strong universal heavy duty hinge. Need a heavy duty hinge for your large heavy doors? Whether you have a timber or steel structure, our ball bearing hinges can take the load.
A lot of older farm buildings, such as shearing sheds, are made up of solid timber. The doors are timber, the frames are timber, everything is timber! The doors are big, wide and heavy. It can be difficult to find a strong, durable hinge to fit your needs.
Our ball bearing hinges allow you to screw onto both a timber door and timber posts. We also have a weld-on hinge option if you have got a new steel framed door or post.
This product is a smooth swinging durable hinge that can be bolted or welded.
Weld & Bolt-On Options
For both timber & steel structures
What are the hinge components?
These zinc plated heavy duty hinges are made of quality steel.
Each set includes a top and bottom part of the hinge. Left or right orientated pins are available based on your needs whether its bolt/bolt, bolt/weld, or weld/weld.
The main hinge has the precision cut pin welded into it. The socket, which the pin is then inserted into includes a big ball bearing. This ensures your door hinges can take a heavy load, yet still open and close smoothly. The ball bearing is kept in the socket with a little collar so it wont accidentally fall out.
To ensure the longevity of your hinge, you can grease the steel ball bearings through greasing points.
Price quoted is for one pair.
Discounts apply for bulk kit purchases of 2+
Specifications:
- 105 x 85mm
- Right position
- Bolt -on type
Features:
- Universal
- Strong
- Easy install
- Long lasting
- Low profile
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL RIGHT BALL BEARING HINGES (PAIR) 105 X 85MM - BBHBR

Burders post hole digger comes complete with hoses and attachment frame. The auger drive is powered by hydraulics and downward pressure is applied when drilling a hole. The frame is designed to allow the auger unit to be adjusted infinitely from one end to another.
Note: Post hole digger pictured with optional Auger attached (refer to options below).
Note: Burder 25 Drive has no clutch
Features:
Available drills: 100 - 600mm
Burder Mounts as standard
Other loader mounts available
All fitted with tungsten dirt teeth
Hydraulic units plumbed to tractor remotes or front remotes
Cement mixer option available
Specifications:
Drive: 50mm round S2
Flow LPM: 15 - 32
Ideal Flow LPM: 25
Auger Range: 100 - 300
Optional Augers:
Model Description Drive Flow L/min
30-40105200 Auger Tungsten Teeth & Pilot 100mm S4 1200mm
30-40155200 Auger Tungsten Teeth & Pilot 150mm S4 1200mm
30-40205200 Auger Tungsten Teeth & Pilot 200mm S4 1200mm
30-40254200 Auger Tungsten Teeth & Pilot 250mm S4 1200mm
30-40304200 Auger Tungsten Teeth & Pilot 300mm S4 1200mm
30-40354200 Auger Tungsten Teeth & Pilot 350mm S4 1200mm
30-40454200 Auger Tungsten Teeth & Pilot 450mm S4 1200mm
30-40604200 Auger Tungsten Teeth & Pilot 600mm S4 1200mm
31-4100200 Extension NA 1000mm
30-20102100 Auger Tungsten Teeth & Pilot 100mm S2 900mm
30-20152100 Auger Tungsten Teeth & Pilot 150mm S2 900mm
30-20202100 Auger Tungsten Teeth & Pilot 200mm S2 900mm
30-20232100 Auger Tungsten Teeth & Pilot 225mm S2 900mm
30-20253100 Auger Tungsten Teeth & Pilot 250mm S2 900mm
30-20303100 Auger Tungsten Teeth & Pilot 300mm S2 900mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 25 FLOW (15-32) LPM - HYDROSTATIC AUGER DRIVE

Buck Rake HD Profile cut tines Hyd Push off - 2400mm.
Specifications:
Width: 2400mm
Capacity (m3): 4.50
Weight: 2100kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER BUCK RAKE - HD PROFILE - 2400MM

Pear Linch Pin Small Bucket. (150 pieces)
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PEAR LINCH PIN (150 PCS. SMALL BUCKET) (11MM PIN DIA, 44.5MM TOTAL LENGTH)

2 stage forklift. Mounted height at 400 ground clearance.
Burder builds 2 stage and 3 stage mast forklifts. The 2 stage mast is suitable for users with low height requirements. The 3 stage mast is the most common build for forklifts and is suitable for users who require more lift height than the 2 stage mast forklift.
Specifications:
Lift Height: 5200mm
Approx. Mast Height: 3200mm
Capacity: 400kg Min, 2000kg Max (further info in images)
Mast Weight: 800kg
All Burder 1,500kg and 2,000kg CTM forklifts have these standard features:
- Clearview through all Burder 2 stage Forklift mast for easy view
- Tine retainer for easy for adjustment
- Compact tilt mechanism, including quick detach (subframe mounted forklift)
- Lock mechanism to ensure easy removal
- Industrial greasable mast bearings with integral thrust for easy maintenance
- Heavy duty industrial mast section
- Hydraulic quick coupler with frame for easy attachment
Burder Forklifts are fitted for extra cost
Options:
2 tonne heavy duty forklift
Quick detach sub frame & compact tilt mechanism (CTM)
Super steer sub frame
Side shift requires extra circuit on valve including hoses on mast
Hoses for tractor remotes 2ccts mid or rear
Hoses for tractor remotes 3ccts mid or rear
2 bank valve
3 bank valve ROPS only
4 bank valve ROPS only
Joystick for ROPS
Cables and joystick
3rd function electric
3rd & 4th function electric
1 x extra hose on mast including couplers
2 x extra hose on mast including couplers
Linkage mount including tilt ram
Fixed high back frame
Bolt on high back frame
Tine retainers (Anti Flip-Up)
Hydraulic soft ride (included in 4.2m & 5.2m units)
Hydraulic soft ride electric
Quick detach hooks for subframe
Weight sensor (pressure sensor in lift circuit, screen in cab) - Dinamica generale fork
Couplers on side shift rams & hoses
Anti-drop valves counterbalance style per circuit
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1,500KG, 5.2M LIFT HEIGHT FORKLIFT (2 STAGE)

OD = 122 mm
ID = 106 mm
Height = 64 mm
Manufactured from high quality chemical resistant UV stabilised polypropylene for durability. Two start threads are convenient and larger screw type lids feature twist on / off centre cap for fast tank filling and quick emptying.
Other sizes are available (refer to picture) to suit many applications - eg. filling points, inspection hatches and man-holes used in agricultural water and chemical tanks.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 122 MM TANK LID (FEMALE THREAD WITH BREATHER)

The Multicut 650 is boosted with additional output capability, enabling the comfortable clearance of more than 8 hectares per hour. A walking axle design is standard across the full width of the machine delivering exceptional ground contour following and reduced shock loading in harsh field conditions. Wider wheels are also fitted to add additional comfort and improved performance.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
Reinforced mega strength deck structure
Built in shock absorbs
LED light kit
Full width walking axle
Full width front & rear safety chains
Heavy duty industrial tyres (wide)
Premium long life shaft drive
Universal drawbar for high or low towing
Adjustable levelling tie bars
Hydraulic wing lift and support
Mechanical wing float support
Full length side skids
Slip clutch protection
111HP rotor box
Anti-scalp disc
Heavy duty winged updraught blades
250HP splitter box
Integrated seal protector
Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

Curved Hay Tine (Conus II). 221164 with point.
Specifications:
Length: 980mm
Weight: 6.7kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 980MM CURVED TINE (CONUS II)

13,500L Cone Bottom Tank on Stand.
Specifications:
Total height: 3700mm
Inlet height: 3500mm
Diameter: 2500mm
Features:
15 degrees cone bottom and full drain bung for total evacuation of contents
Ribbed sidewall tanks for superior strength
Self supporting roof with no internal fixtures or supports
2" complete draining Banjo fitting installed on all tanks (Optional 3" available)
3 Positive tie down points / lifting lugs
Heavy duty galvanised steel frame (Complete stainless steel stands available on request)
Supplied in translucent green colour so level of contents can be seen (Also available in black)
450mm hinged & vented lid
Rated for 1.5SG liquids
Stand also available with forklift slippers for safe and easy lifting when empty.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 13,600L CONE BOTTOM TANK ON STAND

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Can be offset in seconds to work outside the tractor wheel to the left or right hand side. Choice of 5 positions each way to a maximum of 600mm offset.
Alternative holes for the lower linkage arms, provide ample tilt for v-draining.
Allows 24 different angle positions.
Blade can be reversed for back filling.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 6ft
Mouldboard Thickness: 6mm
Mouldboard Height: 350mm
Tractor HP: 20-50
No. offset positions: 9
Weight: 180kg
Options:
0009 Grader Blade Wheel Kit
0418 Boxed ends suit Standard model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS STANDARD OFFSET GRADER BLADES 6FT (1.8M) - 0003, SUIT 20-50HP

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0122 Cyclomatic 2100 (7) Centreline Mulcher
Specifications:
Cutting Width: 2.05m
Overall Width: 2.3m
Body Height: 500mm
Weight: 540kg
Tractor HP Range: 56-84
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 48
No of Tee Hammers (Flails) (Optional): 24
No of SPB vee belts: 4
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift (Does not suit 0122 model)
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 2100 (7') OFFSET LOW BODY MULCHER - 56-84HP (0120)

Find Farm Machinery For Sale. Browse 7552 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

POLYMASTER 5,000L UNDERGROUND TANK INC GARDEN PUMP & FILTER

ROTECH RURAL RIGHT BALL BEARING HINGES (PAIR) 105 X 85MM - BBHBR

BURDER 25 FLOW (15-32) LPM - HYDROSTATIC AUGER DRIVE

BURDER TELEHANDLER BUCK RAKE - HD PROFILE - 2400MM

SPAREX PEAR LINCH PIN (150 PCS. SMALL BUCKET) (11MM PIN DIA, 44.5MM TOTAL LENGTH)

BURDER 1,500KG, 5.2M LIFT HEIGHT FORKLIFT (2 STAGE)

SILVAN 122 MM TANK LID (FEMALE THREAD WITH BREATHER)

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

BURDER 980MM CURVED TINE (CONUS II)

RAPID PLAS 13,600L CONE BOTTOM TANK ON STAND

JOHN BERENDS STANDARD OFFSET GRADER BLADES 6FT (1.8M) - 0003, SUIT 20-50HP

JOHN BERENDS CYCLOMATIC 2100 (7') OFFSET LOW BODY MULCHER - 56-84HP (0120)

Farm Supplies Machinery & Equipment

Dealer Address