Farm Supplies Machinery & Equipment

34" Wide x 47" long (860mm x 1200mm).
Moulded from virtually indestructible flexible UV stabilised Polyethylene Purpose designed moulding to hug modern hoop type ROP frames.
Comes with Bare-Cos Exclusive Socket Mounting System for Torsion Bars - NO mounting bolts pass through moulding.
Colours Available:
B2581 - White Canopy
B2582 - Green Canopy
B2583 - Orange Canopy
B2584 - Blue Canopy
B2585 - Red Canopy
B2586 - Yellow Canopy
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BARE-CO 34" X 47" JUNIOR CANOPY - 6 COLOUR OPTIONS

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0122 Cyclomatic 1800 (6) Centre Line Mulcher
Specifications:
Cutting Width: 1.75m
Overall Width: 2m
Body Height: 500mm
Weight: 490kg
Tractor HP Range: 48-72
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 40
No of Tee Hammers (Flails) (Optional): 20
No of SPB vee belts: 3
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift (Does not suit 0122 model)
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 1800 (6') OFFSET MULCHER - 0126 - 0157, 48-72HP

Long lasting & strong. Looking for some strong galvanised steel fence posts? Our drivable steel posts are perfect for the job.
Price quoted is for one post.
Discounts apply for bulk kit purchases of 10+ or 60+.
Features:
- Easy install
- Termite proof
- Fire resistant
- Galvanised
Specifications:
- 80NB (89mm O.D) post
- 4mm post wall thickness
- 2100mm (7') post length
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL DRIVABLE ROUND STEEL POST 80NB X 2100MM- RSP804.0

Euro Hitch 2.4m Power Claw with 3 pivots for Telehandler mounting.
Made in New Zealand.
Power Claw (Telehandler) Features:
- Good for: rocks, logs, tree removal, hay bales, root rake and pruning's, rubbish and much more
- Exceptional clamping force
- 16mm super high strength tines
- Made with industry leading AR450 grade steel tines!
- Opens to 1.3m between tine points
- Superior alternative to a stick rake
- Supplied with FREE storage stand
Price include euro hitch as standard unless specified, other hitches on request
Previously known as the Versatile Grapple, this Claw can be fitted to almost any loader or material handler. It must be the most useful tool you can think of because of due to the number of applications & tasks it can be used for. These include - rocks, logs, tree removal, hay bales, root rake, pruning's, rubbish etc.
The exceptional clamping force and 16mm AR450 Abrasion Resistant super high strength tines make this grapple a true multi tasker. Interlocking tines ensure excellent grip & clamping force.
PC240T - 16mm Tines, Three pivots for Telehandler Mounting.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 2.4M POWER CLAW (TELEHANDLER) EURO HITCH

Make 100L of high density foam. Provides excellent visibility and long life on the ground.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1L FOAM CONCENTRATE

The T Series range of Climaxx Ramps are built for use with Steel Tracks [including steel tracks with Rubber Pads], and Rubber Tracks. The tread surfaces in this range are robust and are configured to resist damage from tracks.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Electrical & Plumbing Contractors, Demolition Companies, Government Departments or any application where tracked machinery must be transported safely and effectively.
Featuring the greatest versatility of the Climaxx range, these models can be used with tyres as well as with tracks. Select from this range where machinery with Tracks as well as machinery with pneumatic tyres are to be loaded.
In situations where Tracks are not used on Ramps, the Climaxx Rubber Series provide a more lightweight and economical option over these T Series Ramps. Smoother ride is also a distinctive feature of the Rubber Series. Please see the table below, for the full range of Climaxx T Series Ramps.
Specifications:
Rated Capacity: 4,000kg
Ramp Mass: 47kg
Ramp Length: 4.0m
Track Width (internal): 400mm
Ramp Width: 510mm
Ramp Depth: 125mm
Features:
Tread Surface of T Series Ramps.
Foot matching Ramp gradient.
Foot adaptable to varying gradients.
Models:
7/3033T - 3,000kg Rated Capacity, 33kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 110mm Ramp Depth
7/3635T - 3,600kg Rated Capacity, 38kg Ramp Mass, 3.5m Ramp Length, 400mm Track Width (internal), 500mm Ramp Width, 120mm Ramp Depth
7/4040T - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536T - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536TW - 4,500kg Rated Capacity, 44kg Ramp Mass, 3.6m Ramp Length, 450mm Track Width (internal), 560mm Ramp Width, 125mm Ramp Depth
7/4833T - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833TW - 4,800kg Rated Capacity, 41kg Ramp Mass, 3.3m Ramp Length, 450mm Track Width (internal), 560mm Ramp Width, 125mm Ramp Depth
7/6036T - 6,000kg Rated Capacity, 53kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
7/7546T - 7,500kg Rated Capacity, 57kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 184mm Ramp Depth
7/9037T - 9,000kg Rated Capacity, 74kg Ramp Mass, 3.7m Ramp Length, 500mm Track Width (internal), 640mm Ramp Width, 200mm Ramp Depth
7/11537T - 11,500kg Rated Capacity, 88kg Ramp Mass, 3.7m Ramp Length, 500mm Track Width (internal), 660mm Ramp Width, 180mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 4M, 4,000KG CAPACITY (51CM WIDTH) CLIMAXX T SERIES LOADING RAMP

A dual function Chipper/Mulcher. Mulch dry or wet material including all garden waste, newspapers, bamboo, manure, hedge trimmings kitchen waste, hay, leaves and palms.
Chips most branches up to 65mm.
Engine - 2hp Electric Motor
Starter - Electric Start
Chipping Capacity - Single hardened chipper blade with high carbon steel. Chips most branches up to 65mm
Mulching Technology - 18 spring steel reversible hammers on a balanced flywheel with heat treated blade spindles.
Chassis - Steel construction
Transmission - V Belt B section cast iron pulleys or with optional centrifugal clutch for no load starting
Weight = 65kg
Dimensions - H = 1,200 mm x W 680 mm x L 700 mm
Optional Engines include Kohler 5.5hp, or Honda GX200. Prices will vary according to engine chosen.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POWERTECH CM65 CHIPPER / MULCHER WITH 1.5KW ELECTRIC MOTOR

Next generation trailed air assist 4,000 litre G2 sprayer with 161 L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft, flush tank, chemical induction hopper and Radak conveyor with 1000mm fan.
Ideal for orchards with trees up to 5 metres high.
Specifications:
Market: Horticulture
Tank Size (L): 4000
Connection Type: Trailed
Min PTO hp: 80
Pump Size (L/min): 161
Height / Width / Length (mm): 2020 / 1880 / 5550
Product Weight (kg): 1400
Application: Orchards.
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast aluminium body with brass heads and manifolds. IDS1701:161L/min. capacity, 5000kPa pressure.
Fan size: 920mm or 1000mm axial flow type,10 bladed fan with curved nylon reinforced blades, centrifugal clutch for soft engagement/ disengagement and protective mesh cover.
Nozzles: 24 flip-over nozzle bodies for dilute/concentrate spraying with on/off. 12 Ceramic hollow cone nozzles per side and 12 ceramic jets with stainless steel swirl plates per side. (16 per side with the Radak conveyor).
Gearbox: 2-speed with neutral position, oil-bath type
Control: 40 Bar electric section valves with master valve, electric pressure regulator and in cab controls.
Main Tank: Polytuff impact resistant polyethylene construction with calibrated sight line. 50mm Camlock top & bottom fill.
Flush Tank: 330L polytuff tank with top fill. Used to flush pump, filter, spray lines and nozzles.
Hand Wash Tank: 60L polytuff tank filled through cap. Tap located next to chemical mixer hopper.
Main Tank: Chemical mixer hopper with tap controls for rinse, transfer and main tank rinse. Venturi transfer back to main tank.
Frame: Galvanised steel with jockey wheel & adjustable drawbar.
Agitation: Pump bypass plus venturi agitator.
Pressure gauge: Glycerine filled gauge located on valve bank.
Filtration: Suction line filter, pressure filter, nozzle cup strainers.
Wheel Equipment: Glideflex axle with 13.0/65 - 18" implement tyres (speed rating 30km/h).
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Minimum 80 PTO HP (920mm fan), minimum 90 PTO HP (1000mm fan).
Options:
- Hydraulic kit for Radak Conveyor (top wings)
- SCRAM Jet (to suit Radak conveyor)
- AVO Jet (to suit Radak conveyor)
- Leaf guard (to suit Powerhead & Radak)
- Double spray lines (Powerhead - includes upgrade to 1000mm fan)
- Double spray lines (Radak)
- Bravo 180S automatic rate controller
- Tandem suspension axle with 11.5/80 - 15.3 tyres
- Flotation tyres - 558-400/60 - 22.5 (in lieu of standard)
- IDS2001 pump, 182L/min. capacity, 5000kPa pressure
- IDS2600 pump, 249L/min. capacity, 5000kPa pressure
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 4,000L SUPAFLO G2 SPRAYER WITH RADAK FAN - MIN 90HP

Suitable for ROPS and CAB (optional).
The Burder loader series are built to be tough, agile and performs well even under extensive usage.
The Burder loader series comes with a multitude of features such as return to level, soft ride and quick change. These features helps to promote safety, efficiency and productivity in the work environment. As the industry evolves, consumers require more complex features in the loaders in order to enhance productivity in the work environment.
Burder invests resources in R&D to ensure consumer demands are met as well as constantly creating designs that exceed expectations.
Specifications (refer to images to see A, B, C, D & E):
Front Tyre Max: 11.2x24 No Guards
Volume: 0.56m³
Tractor HP: 50-80
Bucket Width: 1.8m
Rated Capacity (std Bkt): 1000kg
A. Lift Height to Pin: 3200mm
B. Dump Height: 2250mm
C. Dig Depth: 150mm
D. Crowd Angle: 45°
E. Dump Angle: 70°
FEL Weight Incl Std Bucket: 800kg
Features:
Mechanical Self Level
2 Bank Valve and Joystick Control (cable for CAB Tractors)
Choice of Euro or Burder Hitch at no Extra Cost
Deluxe Quick Detach Loader
Heavy Duty Gravel Bucket
Full Mesh Grille Guard
Vesconite Wear Bushes at all Pivot Points
Adjustable Level Indicator
Plated Greasable Pins
2 Pack Epoxy Paint
Choice of Colour for Loader Arms
24 Month Limited Warranty
* Burder 8000, 9000 and 10000 Series have Soft Ride as Standard
* Burder 9050 and above have 3rd Function as Standard

Options:
CAB Loader
2 circuit remote (ROPS & CAB)
Electric front remote (1 circuit)
Hydraulic quick coupler (4 port)
Hydraulic Dampeners Manual Shut off
3rd bank & Front Remotes 6, 8, & 9000 ROPS
3rd bank & Front Remotes 3000 ROPS
Detent per Spool
Front Remotes to plug into Tractor Remotes
Multi Doc-Front Remotes Male & Female
Multi Doc-Front Remotes Male Only
6 Port Hydraulic Quick Coupler
Hydraulic Dampeners Electric Upgrade
Eco-pro Joystick Upgrade
Hydraulic Quick Change (Upgrade Optional) - Requires 3rd function to operate (Additional cost)
4th Function
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1.8M BURDER FRONT END LOADER (50-80 HP)

Pipe Linch Pin.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SPAREX PIPE LINCH PIN (8MM PIN DIA, 38MM TOTAL LENGTH)

Heavy Duty (profile cut tines 90mm gaps) bucket. 1800mm to suit Telehandler.
Specifications:
- Stiffener Rib: 1
- Width: 1800mm
- Capacity (m3): 0.78
- Weight: 350kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER HEAVY DUTY STONE BUCKET (CUT TINES 90MM GAPS) - 1800MM

Nut (Conus I - 20mm)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER NUT (CONUS I - 22MM)

Find Farm Machinery For Sale. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

BARE-CO 34" X 47" JUNIOR CANOPY - 6 COLOUR OPTIONS

JOHN BERENDS CYCLOMATIC 1800 (6') OFFSET MULCHER - 0126 - 0157, 48-72HP

ROTECH RURAL DRIVABLE ROUND STEEL POST 80NB X 2100MM- RSP804.0

RATA 2.4M POWER CLAW (TELEHANDLER) EURO HITCH

SILVAN 1L FOAM CONCENTRATE

SUREWELD 4M, 4,000KG CAPACITY (51CM WIDTH) CLIMAXX T SERIES LOADING RAMP

POWERTECH CM65 CHIPPER / MULCHER WITH 1.5KW ELECTRIC MOTOR

SILVAN 4,000L SUPAFLO G2 SPRAYER WITH RADAK FAN - MIN 90HP

BURDER 1.8M BURDER FRONT END LOADER (50-80 HP)

SPAREX PIPE LINCH PIN (8MM PIN DIA, 38MM TOTAL LENGTH)

BURDER TELEHANDLER HEAVY DUTY STONE BUCKET (CUT TINES 90MM GAPS) - 1800MM

BURDER NUT (CONUS I - 22MM)

Farm Supplies Machinery & Equipment

Dealer Address