Farm Supplies Machinery & Equipment

18.5LPM (12 Volt DC) Flojet Quad Series Pump
LPM: 18.5
PSI: SW 45 N-BP
P/S/V, 3/4 HB, quad, 13 amps.
(New version, no fan, longer motor) longer life
Intermittent Duty at 30 psi, continuous at 15 psi.
No Bypass.
Suits most Agricultural chemicals - Weedicides
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FLOJET 18.5LPM (12 VOLT DC) QUAD SERIES PUMP - 4300-504

The coil tines are 30mm square, and are used for primary and secondary cultivation.
They are ideal where deep penetration is required without bringing subsoil up to the surface. They are commonly used in market garden operations to penetrate beneath the normal level of cultivation.
The coil allows the tine to move, assisting penetration and reducing horsepower needed. Coil tines do not disturb the surface as much as the wider chisel plough tines. This is useful in operations as pasture renovation and plough or rotary hoe pan breaking.
The finer tine is also good for secondary cultivation where a heavy machine is needed for heavy soils. Overall width of the machine is 9 wider than the cut width ie: 5 tine is 5 9, 7 tine is 7' 9' and so on.
Features
The frame is 100 x 100 x 6mm, similar to the rigid chisel plough
Cat 1 & 2 Linkage
Extra tines can be fitted if required to reduce tine spacing
30mm square high resistance hardened double coil tines.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings
Horsepower requirements vary widely but 8-10 HP per tine is a rough guide
Excellent underframe trash clearance of 520mm
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18)
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS COIL TINE CHISEL PLOUGHS 7 TINES - 0204

Medium duty left hand offset verge mulcher, for tractors 55 to 110hp. Ideal for general mowing and mulching on verges, banks and roadsides.
Specifications:
Actual Width: 270cm
Working Width: 250cm
Required HP: 85hp
Weight: 915kg
No of Blades: 22
Features:
110hp rated gearbox
Left hand offset
540rpm PTO (2278rpm-tip speed 52.5m/s)
4 belt transmission
Category 2 linkage
Shock absorber with pressure relief valve fitting onto side-shift arm
Front and upper counter knives
Rear roller
Side-shift & tilt (angle) adjustment by hydraulic rams
Gearbox with freewheel safety device
Side skids
Hammer flails
Double skinned chassis
Wide angle driveshaft
Models:
PEGASUS 175 175cm Working width 55hp 780kg 16 Blades
PEGASUS 200 200cm Working width 65hp 810kg 18 Blades
PEGASUS 225 225cm Working width 75hp 860kg 20 Blades
PEGASUS 250 250cm Working width 85hp 915kg 22 Blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 2.5M (85HP) PEGASUS SWING ARM SIDE MULCHER

Trailed 2,000 litre herbicide sprayer with 132 L/min pump and electric valve controls. Designed for spraying herbicide in vineyards.
Specifications:
Market: Viticulture
Tank Size (L): 2000
Connection Type: Trailed
Pump Size (L/min): 132
Height / Width / Length (mm): 1530 / 1800 / 3000
Product Weight (kg): 400
Application: Herbicide sprayer for vineyards
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms & corrosion resistant, cast anodised aluminium body. BP130/20: 132 L/min. capacity 2000kPa pressure.
Controls: Silvamatic 3 section electric valve on/off with in-cab electric pressure adjustment from control box.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line & flip-top easy open lid.
Frame: Galvanised RHS steel construction, jockey wheel & adjustable tow hitch.
Agitation: Bypass action.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge.
Filtration: Lid strainer & suction line strainer.
Wheels: SINGLE ROW: 50mm Duraflex axle with 50mm drop and sliding adjustment. 15" tyres on galvanised rims (max. speed rating 30 km/h). 3 ROW: Tandem suspension axle with 10 x 15" wheels.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
Options:
- Undervine and mid row boom (to suit JB2000-125)
- Bravo 180S automatic spray rate controller
- Hydraulic drive centrifugal pump
- Hydraulic row width and height adjustment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L TRAILED VINEYARD HERBICIDE SPRAYER (SINGLE ROW)

Male Thread = 1/2" BSP
90 Degree Elbow
Suit Hose size (ID) of 15 mm
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1/2" SINGLE PIECE ELBOW WITH BACKNUT (SUIT 15MM HOSE)

Long lasting, versatile steel chain. Looking for strong rust-proof chain? Our galvanised chain will suit any use you can think off. From securing a yard, to cleaning up around the farm, there is little our chain cant do.
Looking for a versatile and long lasting chain for use on your farm? Our galvanised chain is made from quality steel to ensure a strong chain.
Whatever your needs, we have the right size for you;
- Our 3mm and 4mm chain is great for dog chains.
- Our 5mm, 6mm and 8mm chain is perfect for securing your gates and stockyards.
- Maybe you need something heavier to clean up around the farm? Our heavy duty 10mm and 13mm chain is perfect for heavier jobs.
No matter your requirements, we can help.
Price quoted is for one item.
Specifications:
- 13mm chain
- 46 X 65mm link size (WXH)
- 25kg/bucket
- 7m Approx
- Galvanised
Features:
- Strong & long lasting
- Versatile
- Range of sized
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 13MM GALVANISED CHAIN - 25KG (7M) - GC1325

Linkage turbomiser 400 litre sprayer with a 140 L/min centrifugal pump and a 450mm fan. Ideal for vineyards and greenhouses. Note: spray head not included
Specifications:
Market: Horticulture. Viticulture.
Tank Size (L): 400
Connection Type: Linkage
Min PTO hp: 45
Pump Size (L/min): 140
Height / Width / Length (mm): 1150 / 1100 / 1000
Product Weight (kg): 207 (dry)
Application: Vineyards, greenhouse
Features:
Pump: CD32 centrifugal pump 140L/min constructed from toughened nylon. Stainless steel shaft & viton/ceramic seal.
Fan Size: P42E: 420 mm dia. turbine fan, 3900 rpm. Power consumed 18 kw / 35HP. P45E: 450mm dia. turbine fan, 4500 rpm. Power consumed 34 kw / 45HP.
Nozzles: Air shear.
Gearbox: Multiplication type through multi-grip, multi-vee belt and pulley, over-run free wheeling hub and oil bath fan housing.
Controls: Two sided electric on/off control with control box mounted in cabin. Rotary plate distribution regulators with 15 settings and manual pressure adjustment.
Frame: Galvanised RHS steel construction, cat II linkage.
Tank: 400L Polytuff impact resistant polyethylene construction, calibrated sight line, non spill lids, hydro chemical mixer in larger basket, lids with basket strainers, seperate in-built 18L fresh water hand wash tank.
Agitation: Bypass and pneumatic
Pressure Gauge: Protected 100mm glycerine gauge fitted at front of sprayer
Filtration: Lid strainer and suction line strainer
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 25PTO HP (P42), 45 PTO HP (P45)
Options:
- Super cannon for P42E (GT42-1)
- Super cannon for P45E (GT45-1)
- Manual turntable for Super Cannon (GT55-4)
- Hydraulic turntable for Super Cannon (GT55-9)
- Double sided diffuser head (5 outlets per side) for P42E (GT40-2)
- Double sided diffuser head (5 outlets per side) for P45E (GT45-2)
- Vineyard head - 4 heads (4x4) for P45E (GT45-11)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 400L P45E LINKAGE TURBOMISER - MIN 45PTO HP (SPRAY HEAD NOT INCLUDED)

Series 56 Murray Hydraulic Bale Brab - 8 bale.
Features:
- High Strength Steel Bale Hooks
- Heavy Duty Frame & Bale Fence
- Fence is removable or able to swapped from R/ hand to L/ hand
- Able to be fitted with appropriate attachment mechanism to suit tractor, load or telehandler.
Specifications:
- 8 bale
- Weight: 329kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY HYDRAULIC BALE GRAB- 8 BALE, 3PL- SERIES 56

Munro Engineers FenceMate is our effective hydraulic wood borer featuring a 5/8 drill chuck. The perfect accompaniment for a Munro post driver. Install your fence post and bore your wire holes straight away for fast and efficient fencing.


All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUNRO FENCEMATE HYDRAULIC WOOD BORER (ONLY) TO SUIT MULTISETT / TELESETT / AUTODRIVER

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage with 60 -130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1930kg
No of bearings: 8
No of axles: 4
Cutting width: 2.74m (9ft)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

The Mower Series along with the ATV Series are a recent introduction to the Climaxx ramp range. Ideal for Government Departments, Maintenance Contractors, and serious Domestic users.
Featuring impressively low weights whilst maintaining SureWelds full level of quality, these versatile models are the solution to a need for dependable light duty Ramps in keeping with the expectations of Australian operators.
Mower Series ramps are curved for low clearance applications in comparison with the ATV Series which are of straight design.
They are available as rigid (Model: 6/04521ATV) or with a folding section (Models: 6/04521ATVF, 6/042521LCF) for ease of transport.
A distinctive feature of these Ramps is their adaptability to varying loading heights and bearing surfaces.
Suitable for use with lightweight machinery such as Ride-on Mowers. Suitable for use with pneumatic tyres. Not suitable for use with steel tracks. Not suitable for use with solid tyres.
SureWeld are a leading supplier of Australian Made quality Aluminium Loading Ramps.
Specifications:
Rated Capacity: 450kg
Ramp Mass: 6kg
Ramp Length: 2.1m
Folded Length: N/A
Overall Width: 275mm
Internal Width: 240mm
Features:
Foot adaptable to varying gradients.
Tread Surface of Mower Series Ramps.
Hook or Steel Pin Connection.
Models:
6/04521ATV - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, N/A Folded length, 275mm Overall Width, 240mm Internal Width.
6/04521ATVF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
6/042521LCF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
*The 6/042521LCF is curved for low clearance applications such as loading of ride-on mowers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2.1M RIGID CLIMAXX LOADING RAMP FOR ATV

Size = 2 "
Suits 40mm hose
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 2" ELBOW (SUIT 40MM HOSE)

Find Farm Machinery For Sale. Browse 7662 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

FLOJET 18.5LPM (12 VOLT DC) QUAD SERIES PUMP - 4300-504

JOHN BERENDS COIL TINE CHISEL PLOUGHS 7 TINES - 0204

CELLI 2.5M (85HP) PEGASUS SWING ARM SIDE MULCHER

SILVAN 2,000L TRAILED VINEYARD HERBICIDE SPRAYER (SINGLE ROW)

SILVAN 1/2" SINGLE PIECE ELBOW WITH BACKNUT (SUIT 15MM HOSE)

ROTECH RURAL 13MM GALVANISED CHAIN - 25KG (7M) - GC1325

SILVAN 400L P45E LINKAGE TURBOMISER - MIN 45PTO HP (SPRAY HEAD NOT INCLUDED)

MURRAY HYDRAULIC BALE GRAB- 8 BALE, 3PL- SERIES 56

MUNRO FENCEMATE HYDRAULIC WOOD BORER (ONLY) TO SUIT MULTISETT / TELESETT / AUTODRIVER

JOHN BERENDS RM75 HD TRAILING OFFSET 24 PLATE 6MM DISCS - 0842, SUIT 60-130HP

SUREWELD 2.1M RIGID CLIMAXX LOADING RAMP FOR ATV

SILVAN 2" ELBOW (SUIT 40MM HOSE)

Farm Supplies Machinery & Equipment

Dealer Address