Farm Supplies Machinery & Equipment

2.4m Silage Grab (13 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 2.4M SILAGE GRAB (ALSO SUITS TELEHANDLERS)

Four 2 inch high tensile main spikes welded. Ideal for lifting two round bales.
Features:
Four 2in high tensile main spikes welded.
Ideal for lifting two round bales.
Cat 1 linkage with Cat 2 bushes.
Lift capacity of 1,500kg evenly loaded.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TWIN ROUND BALE HANDLING FORKS - 0296

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 32
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3.2M S-TINE (32 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 64HP

Trailed over row P55DSE 2 row 2000 litre turbowrap sprayer with a hydraulic drive 350 L/min stainless steel pump, 550mm turbine fan, sprayheads, automatic spray rate controller, wide angle shaft and tandem suspension axle.
Ideal for vineyards.
Specifications:
Market: Viticulture.
Tank Size (L): 2,000
Connection Type: Trailed
Min PTO hp: 70
Pump Size (L/min): 350
Height / Width / Length (mm): 3330 / 1800 (less head), 2490 (folded) / 4680
Product Weight (kg): 990 (dry)
Application: Vineyards
Features:
Head: Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Three row spraying head: 42 venturi air shear adjustable nozzles with individual metering and on/off taps. Left & right arms are independent hydraulic folding with adjustable width & centre frame. Boom frame is galvanised.
Pump: Stainless steel, hydraulic drive centrifugal pump, 350 L/min. Stainless steel shaft and Viton/ceramic seal.
Fan Size: P55DSE: 550mm dia. turbine fan, 3700 rpm. Power consumed 50 kw / 67HP.
Nozzles: Air shear.
Gearbox: Multiplication type through multi-grip, multi-vee belt and pulley, over-run free wheeling hub and oil bath fan housing.
Controls: Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
Frame: Galvanised steel chassis, adjustable drawbar with jockey wheel.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
Chem Induction: Suction probe with detachable hose.
Agitation: Venturi agitator.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem simplicity suspension with 10 x 15" wheels & tyres. (2000L) or 11.5 x 15.3" wheels & tyres (3500L)
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 70 PTO HP (2 row), Minimum 90 PTO HP (3 row).
Options:
- Quick turning hitch (D99-170)
- Hydraulic row width/height adjustment
- Bravo 180S spray rate controller with hydraulic controls (in lieu) (J99-180)
- Road kit (D99-151)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L (2 ROW) P55DSE TRAILED TURBOWRAP - MIN 70PTO HP

Linkage air assist Suntuff 500 litre sprayer with a 88 L/min diaphragm pump and 800mm fan.
Ideal for smaller vineyards or orchards and smaller horsepower tractors.
Specifications:
Market: Viticulture. Horticulture
Tank Size(L): 500
Connection Type: Linkage
Min PTO hp: 40
Pump Size (L/min): 88
Height / Width / Length (mm): 1325 / 1190 / 1400
Product Weight (kg): 140
Application: Vineyards and Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body. APS71: 67L/min. capacity 5000kPa pressure. APS96: 88L/min. capacity 5000kPa pressure.
Fan Size: Axial flow type, fan with curved nylon reinforced blades, galvanised cowling and protective mesh cover. 600mm with 8 blades on 200L unit. 700mm with 8 blades on 400L unit. 800mm with 10 blades on 500L unit
Nozzles: Flip-over type for dilute/concentrate spraying, ceramic jets, stainless steel swirl-plates. 200L unit: 10 single nozzles (5 per side) twist on/off. 400L unit: 12 flip over nozzles (6 per side) twist on/off. 500L unit: 14 flip over nozzles (7 per side) twist on/off.
Gearbox: Single-speed with neutral position, oil-bath type.
Controls: 3 outlet with pressure regulator. 400/500L models standard with extra length hoses - for tractor control mount.
Tank: Polytuff, impact resistant, polyethylene construction with litre calibrations, non-spill screw-down lid.
Frame: Galvanised steel, suit cat I & II linkage (200L cat I linkage only).
Agitation: 200L: bypass, 400L / 500L: dual bypass.
Pressure Gauge: Glycerine filled gauge, located on the control valve.
Filtration: Lid strainer, suction line strainer and stainless steel nozzle filters.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
HP Required: 200/400L: Minimum 20 PTO HP, 500L: Minimum 40 PTO HP.
Fitment Options:
- Two sided deflector (600mm fan size)
- Two sided deflector (700mm fan size)
- Two sided conveyor (700mm / 800mm fan size)
- Two sided deflector (800mm fan size)
- Bottom air deflectors (600mm / 700mm / 800mm fan size)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 500L SUNTUFF LINKAGE SPRAYER - MIN 40PTO HP

Versatile & Strong Gate Pin.
Looking for an easy way to install a strong bottom pin for your gate? Our galvanised bolt-on bottom pins are perfect for most major gate sizes.
Our mild steel bolt-on bottom pins come in three different sizes to suit most farm gate sizes. It can be welded or screwed on to the bottom of your post, ready for you to sit your gate on top.
Paired with a top saddle, you can expect a smooth gate swing.
Price quoted is for one bolt.
Discounts apply for bulk purchases of 10+
Specifications:
- 20NB gate
- 20mm pin
- Galvanised
Features:
- Solid steel construction
- Versatile
- Long lasting
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL BOTTOM PIN BOLT-ON 20NB - BOBP20

Trailed over row 3,500 litre turbo Scram 3 row tri-wrap sprayer with 4 x 320mm fans, 350 L/min hydraulic drive stainless steel pump, automatic spray rate controller, self contained hydraulic drive system and tandem suspension axle. Ideal for vineyards.
Specifications:
Market: Viticulture.
Tank Size (L): 3,500
Connection Type: Trailed
Min PTO HP: 80
Pump Size (L/min): 350
Height / Width / Length (mm): 3300 / 1800 (less head), 2800 (folded) / 4975
Product Weight (kg): 1,100 (dry)
Application: Vineyards
Features:
Head: Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Three row spraying head: 42 venturi air shear adjustable nozzles with individual metering and on/off taps. Left & right arms are independent hydraulic folding with adjustable width & centre frame. Boom frame is galvanised.
Pump: Stainless steel, hydraulic drive centrifugal pump, 350 L/min. Stainless steel shaft and Viton/ceramic seal. Driven by tractor remotes.
Fan Size: 320 mm turbine fan, one per air tube, 3600 rpm. Power consumed 29 kw / 38HP
Hydraulic Control: Hitch mounted hydraulic power pack with; 40L oil reservoir with cartridge particulate filter, motors fitted with case drain, hydraulic distribution block incorporates anticavitation and pressure relief valves, 12V oil cooler
Nozzles: Air shear.
Controls: Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
Frame: Galvanised steel chassis, linkage hitch fitted with hydraulic power pack
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water tank
Agitation: Venturi agitator.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem suspension axle with 10 x 15" tyres (1500L & 2000L) or 11.5 x 15.3" tyres (3500L).
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 60 PTO HP (2 row), Minimum 80 PTO HP (3 row).
Options:
- Bravo 180S spray rate controller with hydraulic controls (in lieu) (J99-180)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console) (J99-181)
- Hydraulic row width/height adjustment
- Hydraulic pump driven through power pack (D99-185)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,500L (3 ROW) TRAILED TURBO SCRAM TRI-WRAP - MIN 80PTO HP

Ideal to use on all Silvan 12 volt sprayers, sled sprayers and linkage units with BP series pumps.
Supplied with 1/2" and 3/8" Hosetails
Specifications:
Max Pressure: 23 Bar / 350 psi
Product Weight (kg): 0.540
Length (mm): 710
Max Flow Rate : 25 L/min
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN GEO57 SPRAY GUN

The Multicut 650 is boosted with additional output capability, enabling the comfortable clearance of more than 8 hectares per hour. A walking axle design is standard across the full width of the machine delivering exceptional ground contour following and reduced shock loading in harsh field conditions. Wider wheels are also fitted to add additional comfort and improved performance.
Renowned durability is built into this mower and the evenness of spread from the five rotors is unrivalled leaving a clean finish and high output unmatched by competitive three rotor machines of the same width. With a six gearbox driveline, each with slip clutch protection, the power is evenly spread to deliver exceptional reliability and durability whilst allowing enhanced forward speeds and fuel efficiency.
Features:
Reinforced mega strength deck structure
Built in shock absorbs
LED light kit
Full width walking axle
Full width front & rear safety chains
Heavy duty industrial tyres (wide)
Premium long life shaft drive
Universal drawbar for high or low towing
Adjustable levelling tie bars
Hydraulic wing lift and support
Mechanical wing float support
Full length side skids
Slip clutch protection
111HP rotor box
Anti-scalp disc
Heavy duty winged updraught blades
250HP splitter box
Integrated seal protector
Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 2,850kg / 6,283lbs
Hitch: Multi-positional drawbar
Cutting width: 6.28m / 247"
Working machine width: 6.47m / 255"
Transport machine width: 2.70m / 106"
Maximum working length: 5.07m / 200"
Transport length: 4.93m / 194"
Deck height (underside of deck to skid): 0.23m / 9"
Transport height: 2.90m / 115"
Cutting height: 25mm - 210mm (1" - 8 1/4")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 90hp / 67kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1" 3/8 Z21 or Z6 SFT 8 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes (x3)): 2.1L / 3.7 pints
Gearbox oil capacity (outer rotor gearboxes (x2)): 1.3L / 2.3 pints
Deck construction: All welded construction
Deck material thickness: 6mm (1/4")
Side skirt material thickness: 5mm (3/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 5mm (3/16") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift - low friction
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 6
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 21x9 14 PLY optional wider pneumatic tyre with steel hub
Front guard: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

Trailed 2,000 litre pasture sprayer with 132 L/min diaphragm pump, manual controls on pump.
Specifications:
Market: Dairy & Livestock
Tank Size (L): 2000
Connection Type: Trailed
Pump Size (L/min): 132
Height / Width / Length (mm): 2100 / 3500 / 1550
Product Weight (kg): 440
Application: Pasture spraying.
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body. BP60/20: 58L/min capacity 2000kPa pressure. BP130/20: 132 L/min. capacity 2000kPa pressure.
Controls: One lever 3 outlet control with pressure regulator mounted on adjustable arm.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, non-spill screw-down lid with dual breathers.
Frame: Galvanised RHS steel construction, jockey wheel & height adjustable tow hitch.
Agitation: Bypass action.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge mounted on adjustable arm.
Filtration: Lid strainer and suction line strainer
Wheels: 60mm straight single axle fitted with 15" tubeless tyres on galvanised rims (max speed rating 30km/h).
PTO: Quality driveshaft with quick release pins & safety cover.
Options:
- 6m Field boom
- 6m Hydraulic fold boom
- 8m Field boom
- 8m Devil boom with hydraulic fold
- 10m Field boom
- 12m Fieldmaster boom with suspension
- Undervine and mid row boom
- 16L foam marker (double sided)
- Electric valve controls with pressure regulator and in cab pressure adjustment
- Economy hosereel, 20m hose (12mm ID) and JetPro spraygun
- Bravo 180S automatic rate controller
- Hydraulic drive centrifugal pump
- 2m track axle with 14.9 x 24" lug tyres (in lieu - 2000L only)
- Mudguards (to suit 14.9 x 24" wheels)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L TRAILED PADDOCKMASTER PASTURE SPRAYER

Made in Australia
Features:
- 12 mm AR36 high grade tynes
- 70 mm spacing's
- Front lip to hold rocks & branches
- Standard Tooth Bar Lip style
- Suits up to 100 hp
- Overall width = 2,400 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH ROCK SIEVE BUCKET (2.4M)

Hinge joint strainer 1200mm.
To strain up your fence wire, the tried and true method is to use a Chain Strainer. For straining up a mesh fence you will need 2 Chain Strainers connected to a Mesh Clamp.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS HINGE JOINT STRAINER 1200MM

Find Farm Machinery For Sale. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

RATA 2.4M SILAGE GRAB (ALSO SUITS TELEHANDLERS)

JOHN BERENDS TWIN ROUND BALE HANDLING FORKS - 0296

JOHN BERENDS 3.2M S-TINE (32 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 64HP

SILVAN 2,000L (2 ROW) P55DSE TRAILED TURBOWRAP - MIN 70PTO HP

SILVAN 500L SUNTUFF LINKAGE SPRAYER - MIN 40PTO HP

ROTECH RURAL BOTTOM PIN BOLT-ON 20NB - BOBP20

SILVAN 3,500L (3 ROW) TRAILED TURBO SCRAM TRI-WRAP - MIN 80PTO HP

SILVAN GEO57 SPRAY GUN

FIELDQUIP MULTICUT 650 FLEX WING SLASHER (MIN 90HP)

SILVAN 2,000L TRAILED PADDOCKMASTER PASTURE SPRAYER

HIMAC EURO HITCH ROCK SIEVE BUCKET (2.4M)

LEMPRET WIRE & SEALANTS HINGE JOINT STRAINER 1200MM

Farm Supplies Machinery & Equipment

Dealer Address