Farm Supplies Machinery & Equipment

This Low Profile 2,270L rainwater tank provides a handy supplement to your households main water supply for a range of uses such as garden irrigation and laundry. As with all Polymaster rainwater tanks, this certified tank is manufactured with strength in mind.
When you invest in a rainwater tank its important that you get one that lasts and is fit for purpose. Australian standards are put in place to give households, peace of mind when it comes a tanks usability.
Dimensions:
Capacity : 2,270 L (500 gallons)
Diameter: 1,700 mm
Inlet Height : 1,200 mm
Overall Height : 1,310 mm
Features:
- Self supporting roof means no support poles are necessary
- One piece construction means no joins or seams
- Solid brass threaded outlet & ball valve as standard
- Upgraded outlet and ball valves are available at an additional cost
- Certified to AS/NZS 4766:2006 Standard
- Outlet standard position 6 o'clock
- Outlet position can be moved from standard based on positions on the Fit Out Clock
- Replacement manhole covers and strainers available
- Available in 22 Colours
- 90mm overflow as standard
Standard Fit Out:
Strainer Position: 12 o'clock
Outlet Position: 6 o'clock
Overflow Position: 11 o'clock
Strainer Size: 400 mm
Outlet: 25 mm (brass)
Ball Valve : 25 mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POLYMASTER 2,270L RAINWATER TANK (LOW PROFILE)

An excellent addition to your own steel posts & stays. Already have your own posts and stays?
Our fitting kits have all the components you need to build your own end assembly.
Are you looking for a long lasting rust resistant fence straining kit that can take less than 15 minutes to set up? Our fitting kits are simple and very easy to install.
Everything is bolt on. No need to carry around your welder or drill. All you need is something to tighten the nuts and bolts.
The design of our Twist Tight Stay Connectors means you can run your end assemble at any angle or pair it with corner kit.
Our unique design incorporates a cable instead of a tension rod. It is a lot quicker to install just drop the loop over your post, or slip knot it if you have existing wire installed and run the tension cable to your footplate. No drilling required.
All components are either stainless steel or hot dipped galvanised to ensure a long lasting end assembly.
Be careful of other alternatives that say they are galvanised (when really, they aren't).
Price quoted is for one kit. Kit includes...
Cap, Post & Stay Connector, Footplate, & Tension Cable.
Discounts apply for bulk kit purchases of 5+, 50+ or 120+.
Features:
- Fast install
- Strong & reliable
- Galvanised
- Bolt-on
- Any angle
- Easy to store
Specifications:
- 80NB (89mm O.D) Post
- 50NB (60mm O.D) Stay
- Extra light stay section
- 2.3mm Stay wall thickness
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL EXTRA LIGHT FITTING KIT (BOLT-ON COMPONENTS. NO PIPE INC) - 80NB X 50NB - SSFK8050

Silvan General Purpose Slasher - 1.07m (3ft 6 inch)
Suits 18-40 HP
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 18-40 HP
- Working Width (mm): 1070
- Product Weight (kg): 151
Options Available:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.07M 102 GENERAL PURPOSE SLASHER (SUIT 18-40HP)

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Also Available:
0122 Cyclomatic 1800 (6) Centre Line Mulcher
Specifications:
Cutting Width: 1.75m
Overall Width: 2m
Body Height: 500mm
Weight: 490kg
Tractor HP Range: 48-72
Blade tip speed: 200km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 40
No of Tee Hammers (Flails) (Optional): 20
No of SPB vee belts: 3
Rotor Size: 168x11mm
Alignment (adjustable): Offset/Centre
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift (Does not suit 0122 model)
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 1800 (6') OFFSET MULCHER - 0126 - 0157, 48-72HP

Fence posts black - 1350mm. (4ft 6 inch).
Price is for one post.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

LEMPRET WIRE & SEALANTS FENCING POSTS BLACK - 1350MM (4FT 6 INCH)

This brass high quality double action sprayer is excellent for spraying flowers, shrubs and small fruit trees in home gardens and nurseries
Features
- The long extension wand
- Angled at the nozzle end for spraying under and over foliage ensures the operator is kept well clear of chemicals being applied
- The 305cm (10ft) plastic suction hose with weighted strainer
- Allows easy movement around the container
- The No6A cyclone nozzle fitted to the unit is fully adjustable from a straight jet to a fine mist
- Parts Available
Service Kit #UN99
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

REGA UNI SPRAYER - REGA - UNI

The PT Series are the specialised range of Climaxx Ramps designed for use with All Surface Loader Rubber Tracks. The tread surfaces in this range are configured to reduce the possibility of damage to these types of tracks and are generally wider than Rubber Series and T Series Ramps. Ideal for owners and operators who need to safely and effectively transport machinery fitted with All Surface Loader Rubber Tracks.
Whilst catering for the distinctive features of such tracks, these models can also be used with pneumatic tyres. Select from this range where machinery fitted with All Surface Loader Rubber Tracks as well as machinery with pneumatic tyres are to be loaded.
For loading machinery with Steel Tracks [including with Rubber Pads], the Climaxx T Series Ramps must be used. Where machinery with pneumatic tyres, or rubber tracks is to be loaded, the Climaxx Rubber Series offer a more lightweight and economical alternative. Please see the table below, for the full range of Climaxx PT Series Ramps.
Specifications:
Rated Capacity: 4,500kg
Ramp Mass: 48kg
Ramp Length: 3.6m
Track Width (internal): 550mm
Ramp Width: 660mm
Ramp Depth: 125mm
Features:
Tread Surface of PT Series Ramps.
Steel Pin Connection.
Foot matching Ramp gradient.
Models:
7/3033PT - 3,000kg Rated Capacity, 36kg Ramp Mass, 3.3m Ramp Length, 450mm Track Width (internal), 550mm Ramp Width, 110mm Ramp Depth
7/3033PTW - 3,000kg Rated Capacity, 38kg Ramp Mass, 3.3m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 110mm Ramp Depth
7/3635PT - 3,600kg Rated Capacity, 41kg Ramp Mass, 3.5m Ramp Length, 450mm Track Width (internal), 550mm Ramp Width, 120mm Ramp Depth
7/4526PT - 4,500kg Rated Capacity, 46kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 610mm Ramp Width, 125mm Ramp Depth
7/4536PTW - 4,500kg Rated Capacity, 48kg Ramp Mass, 3.6m Ramp Length, 550mm Track Width (internal), 660mm Ramp Width, 125mm Ramp Depth
7/4833PT - 4,800kg Rated Capacity, 42kg Ramp Mass, 3.3m Ramp Length, 500mm Track Width (internal), 610mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.6M, 4,500KG CAPACITY (66CM WIDTH) CLIMAXX PT SERIES LOADING RAMP

Drawbar & Hanger.
Suits tractor models shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SWINGING DRAWBAR WITH CLEVIS - OVERALL LENGTH: 650MM - SECTION: 30X60MM

200L APV Seeder for Power Harrows
To suit Breviglieri MF80 and MF100 power harrows. See the MF80 and MF100 Power Harrows for the units these attach to.
Features:
- Working width: 1 - 6 metres with double electric fan, 8 outlets.
- Hopper capacity: 200L
- 12 Volt in cab controller with hectare meter.
- Fine and coarse seed sowing shafts.
- 8 Dispersion plates.
Dimensions:
Height = 100 cm
Width = 70 cm
Depth = 90 cm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 200L ELECTRIC APV AIR SEEDER

Note: This model does include a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16) tine clearance which is extremely important in preventing trash build up.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 12
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1.2M S-TINE (12 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 24HP

Australian made Frame - German made Spears
Features:
- Quality German-made 1200 mm removable spears - conus 2
- Bright red colouring for maximum visibility
- 1,200 mm Spears are removable
- Euro hitch as standard
- Frame Height = 900 mm
- Weight = 112 kg
- Suits up to 115 hp
- Lift Capacity = 1,600 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH HAY FORKS (DOUBLE SPEAR)

Trailed over row TGS 3 row 3000 litre sprayer with 182 L/min pump, electric valve controls and 500mm twin turbine fan. Ideal for vineyards and berries. Note: infield product images are of 2 row 2000L TGS.
Specifications:
Market: Horticulture. Viticulture.
Tank Size (L): 3,000
Connection Type: Trailed
Min PTO hp: 75
Pump Size (L/min): 182
APPLICATION: Vineyards, berries
Features:
Head: Multi row spraying head with air assist diffusers and twin spray nozzles. Each air diffuser features swivel adjustment and air deflector. Poly air tubes shaped to surround canopy. Both arms have independent hydraulic fold with manual width & height adjustment (2 tractor remote sets required).
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifolds. IDS1701: 161L/min. capacity 5000kPa pressure. IDS2001: 182L/min. capacity 5000kPa pressure.
Fan Size: 500mm twin impeller turbine fan, power consumed 48 kw (64HP).
Nozzles: Twin hollow cone ceramic nozzles per outlet with individual on/off non-drip taps.
Gearbox: 2-speed with neutral position, oil-bath type
Controls: 40 Bar electric section valves, master valve, electric pressure regulator and in cab controls
Frame: Galvanised steel chassis, adjustable drawbar with jockey wheel.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
Chem Induction: Suction probe with detachable hose.
Agitation: Pump bypass plus venturi agitator.
Pressure Gauge: 0-60 bar glycerine filled gauge fitted to pump.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem simplicity suspension with 10 x 15" wheels & tyres. (2000L & 3000L) or 11.5 x 15.3" wheels & tyres (3500L & 4000L)
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 75 PTO HP
Options:
- IDS2600 pump, 249L/min capacity, 5000kPa pressure (D99-149)
- Bravo 180S automatic rate controller (D99-143)
- Vertical lift head assembly (1 extra set of tractor remotes required) (TGS-LIFT)
- Quick turning hitch (D99-170)
- Hydraulic row width adjustment (1 extra set of tractor remotes required) (D99-186)
- Road kit (D99-151)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,000L (3 ROW) TGS TRAILED SPRAYER - MIN 75PTO HP

Find Farm Machinery For Sale. Browse 7617 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

POLYMASTER 2,270L RAINWATER TANK (LOW PROFILE)

ROTECH RURAL EXTRA LIGHT FITTING KIT (BOLT-ON COMPONENTS. NO PIPE INC) - 80NB X 50NB - SSFK8050

SILVAN 1.07M 102 GENERAL PURPOSE SLASHER (SUIT 18-40HP)

JOHN BERENDS CYCLOMATIC 1800 (6') OFFSET MULCHER - 0126 - 0157, 48-72HP

LEMPRET WIRE & SEALANTS FENCING POSTS BLACK - 1350MM (4FT 6 INCH)

REGA UNI SPRAYER - REGA - UNI

SUREWELD 3.6M, 4,500KG CAPACITY (66CM WIDTH) CLIMAXX PT SERIES LOADING RAMP

SPAREX SWINGING DRAWBAR WITH CLEVIS - OVERALL LENGTH: 650MM - SECTION: 30X60MM

SILVAN 200L ELECTRIC APV AIR SEEDER

JOHN BERENDS 1.2M S-TINE (12 TINES) STANDARD CULTIVATOR (WITH CRUMBLER) - MIN 24HP

HIMAC EURO HITCH HAY FORKS (DOUBLE SPEAR)

SILVAN 3,000L (3 ROW) TGS TRAILED SPRAYER - MIN 75PTO HP

Farm Supplies Machinery & Equipment

Dealer Address