Farm Supplies Machinery & Equipment

Murray Series 54 Smudge Bar 1.8m - 3PL.
Versatile implement that allows the user to level ground, finish dirt driveways, spread sand in horse arenas and more.
Cat I Pins come as standard. Cat II Pins are available. Manufactured from global materials.
Features:
- Made from heavy duty angle steel main frame 75x75x8
- Foldable Three Point Linkage arm for flat pack storage.
Specifications:
Width - 1.8m
Weight - 120kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY SMUDGE BAR 1.8M, 3PL- SERIES 54

Trailed over row 2 row 3,000 litre turbowrap turbomiser sprayer with a hydraulic drive 350 L/min stainless steel pump, 500mm turbine fan, sprayheads, automatic spray rate controller, wide angle shaft and tandem suspension axle.
Ideal for vineyards. Note: pictured is 3,000L Tri-Wrap.
Specifications:
Market: Viticulture.
Tank Size (L): 3,000
Connection Type: Trailed
Min PTO hp: 75
Pump Size (L/min): 350
Height / Width / Length (mm): 3480 / 1755 (less head), 2576 (folded) / 4850
Product Weight (kg): 1,500 (dry)
Application: Vineyards
Features:
Head: Two row spraying head: 28 venturi air shear nozzles with individual metering and on/off taps. Three row spraying head: 42 venturi air shear adjustable nozzles with individual metering and on/off taps. Left & right arms have independent hydraulic folding with adjustable width & centre frame. Boom frame is fully galvanised.
Pump: Stainless steel, hydraulic drive centrifugal pump, 350 L/min. Stainless steel shaft and Viton/ceramic seal.
Fan Size: 500mm twin impeller turbine fan. Power cons. 48 kw/64HP.
Nozzles: Air shear.
Gearbox: 2-speed with neutral position, oil-bath type
Controls: Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
Main Tank: Polytuff impact resistant polyethylene construction, calibrated sightline, flip top lid, 50mm camlock bottom fill, and hand wash tank. 205L flush tank on 3,000L.
Frame: Galvanised steel chassis, adjustable drawbar with jockey wheel.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
Chem Induction: Venturi suction probe.
Agitation: Venturi agitator.
Pressure Gauge: Glycerine filled gauge located on the valve bank.
Filtration: Suction line filter and pressure filter
Wheel Equipment: Tandem suspension axle with 10 x 15" tyres (3000L) or 11.5 x 15.3" tyres (4000L).
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity (wide angle) driveshaft with quick release pins and safety cover.
HP Required: Minimum 75 PTO HP (2 row), Minimum 90 PTO HP (3 row).
Options:
- Quick turning hitch (D99-170)
- Hydraulic row width/height adjustment
- Bravo 180S spray rate controller with hydraulic controls (in lieu) (J99-180)
- Road kit (D99-151)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 3,000L (2 ROW) TRAILED TURBOWRAP - MIN 75PTO HP

The multi-purpose, heavy duty mulching mowers are ideal for a variety of mulching applications. From rejuvenating old pastures to cutting up pruning's, gorse bush and scrub up to 50mm in diameter. Designed and manufactured in Australia for Australian conditions.
Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road side contracting. Also available with hydraulic side shift which moves the mulcher up to 230mm in either direction.
Features
Adjustable Cat 1 and 2 linkages with floating top link position for undulating ground.
Heavy duty belt cover with inspection hatch.
5mm thick front stone guards.
Sturdy 5mm top deck.
High quality 2 pack paint finish.
Heavy duty 85HP Italian Oil Bath Gearbox Series 7 Italian Driveshaft with optional over-run clutch.
Standard with adjustable rear roller. Fitted with triple sealed bearings with grease release seals.
Adjustable back flap doubles as a scraper for the roller when in the mulching position.
Optional adjustable skids and wheels are available for depth control.
Heavy duty 2 bearings with taper lock centres and dust protection plate. Also fitted with anti-wire rotor guard.
Specifications:
Cutting Width: 1.4m
Overall Width: 1.7m
Body Height: 500mm
Weight: 400kg
Tractor HP Range: 40-60
Blade tip speed: 200 km/hr
Rotor speed at 540rpm: 2268rpm
No of Y blades (Standard): 32
No of Tee Hammers (Flails) (Optional): 16
No of SPB vee belts: 3
Rotor Size: 168x11mm
Alignment (adjustable): offset
Options:
1612 Mulcher Adjustable Skids (Pair)
1611 Mulcher Hydraulic Side Shift
1613 Mulcher Adjustable Pair Solid Rubber Wheels
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS CYCLOMATIC 1500 (4'8") OFFSET MULCHER - 0157, 40-60HP

Skinning sheaths are suitable for curved skinning knives. They are made from heavy duty tanned leather, stitched and riveted.
The sheaths are Taurus brand and also have a steel pocket.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF SKINNING KNIFE SHEATH (ONLY)

Serious lifestyle block owners & orchardists need look no further. Simply hitch this chipper to your 540 RPM PTO and you have a machine that has the same capabilities as its engine powered equivalent. Maintenance is effortless with simple access to the blades. Suitable for any small tractor from 17 45HP.
The Hansa C13 PTO is powered by your tractor for easy mulching in and around your property. Ideal for domestic and commercial use on acreage, farms and orchards popular with gardeners, hire companies, landscapers, groundskeepers and contractors.
The Hansa C13 PTO easily mulches prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste.
Features:
Heavy duty blades
Solid-steel casing
Adjustable output chute
Twin belt drive
Minimal cleaning and maintenance required
Technical Specifications:
Chipping capacity: 90mm
Dimensions: H1500mm x W900mm x L1100mm
Weight: 177kg
Horsepower required: 17hp 45hp
PTO rpm: 540rpm 640rpm
Knives: 200mm x 58mm x 7mm A8 modified tool steel Heat treated and ground all over.
Anvil: Case hardened, reversible
Disc speed: 2000rpm
Disc size: 565mm x 12mm
Pulleys: 2 x cast iron
Belts: 2 x V belts B55
Bearings: 2 x self-aligning ball bearings
Infeed throat opening (intake chute): 190mm x 190mm
Tractor linkage: 3 point cat 1
Finish: Powder coated
Warranty: Chipper one year domestic warranty
Optional Add-Ons and Spare Parts:
C13 270 degree Swivel Outlet
C13 Blades
C13 Anvil
C13 Belts
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HANSA C13 WOOD CHIPPER, PTO DRIVEN, 90MM CHIPPING CAPACITY

Murray 53020, Series 53 Tow Hitch Hayman Reece style - 3PL.
Strong robust design to assist with hooking up trailers to your tractor. Available in four different styles.
Manufactured from global materials.
Features:
- All steel construction
- Hayman Reese compatibility
- Four different styles available
- Preassembled ready for use
- Upgraded specifications and steel wall thicknesses
Specifications:
- Tow Hitch Hayman Reece style Cat I & II.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY TOW HITCH HAYMAN REECE STYLE- 3 POINT LINKAGE

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1970kg
No of bearings: 12
No of axles: 6
Cutting width: 2.74m (9ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 24 INCH 5MM SCALLOP DISCS - 0851, SUIT 75-165HP

Jacky Storage Bin Side Discharge - 1,730 litre.
The LA1500/8 Side Discharge JACKY® Hopper Bin design incorporates a poly hopper mounted in a fork-liftable steel stillage. The bin empties through a side opening at the base of the bin, with the slide-hatch mechanism allowing precise control of the discharge rate.
The side discharge JACKY Bin is ideal for bagging feed, feeding out grain
and pellets, filling seed drills and self-feeders, and dispensing into product
blending systems.
The steep slopes and large discharge opening assist
with positive drainage and minimal retention of product in hopper.
With a 45 degree slope from front to back, and 60 degree walls on the side,
the side discharge JACKY Bins evacuate completely, making them ideal for
a wide range of dry, granular products.
Australian made and owned.
Benefits:
- 1200kg/1.73m3 capacity.
- Safe Working Load (SWL) - 1200kg.
- Very low profile bin for height critical applications.
- Ideal for feed and seed storage.
- Large top opening for easy filling and cleaning.
- All working parts are UV stabilised polyethylene or stainless steel for longevity.
- 40° run slope allows the discharge rate of most granular products to be easily controlled.
- Standard colour is Faint Green.
- Serial numbering and custom branding available to assist in tracking batch lots.
Specifications:
- Opening size - base: 295x245mm
- Opening size - top: 1000x1000mm
- Fork Pocket size: 150x100mm
- Fork Pocket Centres: 830mm
- Length: 1400mm
- Width: 1200mm
- Height: 1860mm
- Capacity (Ltrs): 1730
Options:
- Raimo bulk bag dispenser
- Reaper knife blade
- Document holder heavy duty
- Tine pocket 1,000mm (folded 200mm x 100mm)
- Weather flap
- Lever (double sided)
- Lever (left)
- Lever (right)
- Chute 1,000mm
- Chute 280mm
- Chute with 100mm diameter nozzle
- Chute flexible
- Actuator kit 12 volt
- Leg extension to suit
- Clear sightglass point in face of Jacky bin
- Hatch assembly
- Lid to suit
- Eurohitch attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JACKY STORAGE 1,730L SIDE DISCHARGE BIN (LOW PROFILE)

All models feature 2 x 15 ground wheels spaced 1.8m apart, 6.9mm tynes, independent raking wheels, and Hydraulic raise and lowering of raking wheels, splitter wheel kits included.
These rakes are simple to use, lightweight wheel rake, that ensures clean collection and an excellent windrow. Its wide wheelbase makes the machine stable during work and transport.
Features:
- 50hp minimum requirement
- Trailing connection
- 660 cm working width
- 10 wheels
- 40 teeth per wheel
- Tapered roller bearings
- 660 kg machine weight
- Mechanical width adjustment
- Hydraulic wheel lifting
- Optional central rake wheel
Note: Hayrakes Delivered Unassembled
* Maximum working width and speeds depend greatly upon product raked, volume and general conditions.

Enorossi caddy rakes are suitable for small extensions, and are ideal for uneven terrain.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ENOROSSI 10 WHEEL TRAILED HAYRAKE - 5L/5R RAKE WHEELS

Strong, Low Profile Gate Pin.
Looking for an easy way to install a strong bottom pin for your gate? Our galvanised long plate gudgeons allow you to secure your gate lower to the ground.
Our steel long plated gudgeons suit most popular farm gate sizes. It can be welded or screwed on to the bottom of your post, ready for you to sit your gate on top. The backing plate is positioned behind the pin. This enables you to sit your gate closer to the ground. The screws will also be position behind the gate, making it difficult to access (thus more secure) once the gate is on.
Paired with a top saddle, you can expect a smooth gate swing.
Price quoted is for one pin.
Discounts apply for bulk purchases of 10+
Specifications:
- 20NB gate
- 20mm pin
- Galvanised
Features:
- Strong
- Weld on
- Screw on
- Long lasting
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL LONG PLATE GUDGEON WELD/SCREW-ON 20NB - WOG20L

Fine luxury bathroom soap with wonderful 'champagne' lather.
Made in New Zealand with all-natural ingredients. Individually wrapped and boxed.
Goats milk - contains palm kearnelate and palm oil with goats' milk. Goats' milk is rich in protein and contains many vitamins and minerals.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HENRIETTA GOATS MILK NATURAL SOAP

Titan backhoes are designed to provide superior digging, trenching and material handling. It is high versatile and can be used for a wide variety of tasks such as excavating, landscaping, and construction works. All of Titan backhoes are 3 point linkage mounts.
Note:
- All models include PTO pump and Tank, bolt up lock up bar kit to suit.
- Dealer to allow 3-4 hours shop time for fitting, to include possible addition of welding and painting costs, to ensure product safety when being fitted to some tractors.
- The Side Shift unit is heavier duty, and is recommended for higher duty cycle applications.
- Tractors with PTO seat safety switch will require extra electrics at the dealership.
Dimensions / Specifications included in images.
Options:
Bolt on fixed thumb grab
100 to 180 Ripper
230 to 290 Ripper
Other Bucket Options:
235mm (2 teeth)
300mm (3 teeth)
450mm (3 teeth)
600mm (no teeth)
700mm (no teeth)
900mm (no teeth)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BURDER 180CM DEPTH BACK HOE (40-80HP) - CENTRE MOUNT - 3PL - U180

Find Farm Machinery For Sale. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale

Farm Supplies Machinery & Equipment

Sale Price

MURRAY SMUDGE BAR 1.8M, 3PL- SERIES 54

SILVAN 3,000L (2 ROW) TRAILED TURBOWRAP - MIN 75PTO HP

JOHN BERENDS CYCLOMATIC 1500 (4'8") OFFSET MULCHER - 0157, 40-60HP

SHOOF SKINNING KNIFE SHEATH (ONLY)

HANSA C13 WOOD CHIPPER, PTO DRIVEN, 90MM CHIPPING CAPACITY

MURRAY TOW HITCH HAYMAN REECE STYLE- 3 POINT LINKAGE

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 24 INCH 5MM SCALLOP DISCS - 0851, SUIT 75-165HP

JACKY STORAGE 1,730L SIDE DISCHARGE BIN (LOW PROFILE)

ENOROSSI 10 WHEEL TRAILED HAYRAKE - 5L/5R RAKE WHEELS

ROTECH RURAL LONG PLATE GUDGEON WELD/SCREW-ON 20NB - WOG20L

HENRIETTA GOATS MILK NATURAL SOAP

BURDER 180CM DEPTH BACK HOE (40-80HP) - CENTRE MOUNT - 3PL - U180

Farm Supplies Machinery & Equipment

Dealer Address