Farm Supplies Machinery & Equipment

Best suited to medium horsepower tractors up to 95HP for grass and light pruning's with cutting height maintained by the rear roller.
Specifications:
Connection Type: Linkage
Tractor HP: 40-95 HP
PTO RPM: 540
Y Blades: 40
Working Width (mm): 1520
Weight (kg): 370
Height / Width / Length (mm): 420 / 1720 / 750
Features:
Suggested Use: Grass mowing and green pruning's up to 50mm in diameter.
Construction: Low profile body, no opening tailboard.
Driveline: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with overrun clutch, taper locked pulleys and electronically balanced rotor.
Attachment: Cat. I three point linkage, floating top link.
Height Control: Roller (standard fitment).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NOBILI 1.5M BNE MULCHER (40-95HP)

Murray 2.28m, Series 06 Kinked Spring Tine 3 Rank Harrow System - Medium Duty- Complete Unit - 6015.
The Series 06 is a medium duty Spring Tine Harrow System popular with farmers for levelling operations in conjunction with primary and secondary tillage implements.
Series 06 Harrows employ double spring tines available in Kinked or Straight Tines, both 10mm in diameter. The tine angle is adjustable to suit your field conditions.
3 rank versions are available in three sizes ranging from 1.37m (4ft 6in) to 2.28m (7ft 6in). Murrays also manufacture an extra wide 14in (335mm) Rank Spacing Straight Tine units which seeks to provide superior trash flow handling capabilities.
Manual lifting has been eliminated with harrows able to be folded and travel with the principal implement.
Specificatons:
- 2.28m
- Weight: 121kg
- Tine Spacing for 3 rank models - 75mm (3in)
- Tine diameter is 10mm, Kinked (standard) or Straight Tine (Optional)
- Tine Length 450mm (17 3/4in) approx
- Rank Spacing 235mm (9 1/4in) STD 3 Rank
- 2 Mount Arms per unit
Features:
- Kinked design Tines as standard.
- Straight design Tines optional.
- This Harrow is designed to fit on to the rear bar of scarifiers, chisel plows, cultivators etc.
- Adjustable Tine angle.
Optional:
- Straight Tines
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.28M KINKED SPRING TINE 3 RANK HARROW MEDIUM DUTY COMPLETE UNIT - SERIES 06

Unique Patented Design. Australia's Strongest and Largest Hand Drivable Posts. Looking for a heavy duty end assembly that's quick and easy to install? The Drive-Tight posts require only half the driving force of round pipe.
Do you have a requirement that is non standard? You are in luck, we can help!
The StayTight Fitting Kits, offer the user almost unlimited options when it comes to customised requirements in strainer assemblies.
Due to the fact our system fits perfectly on plain unprocessed pipe and requires no pre-drilled holes or prefabricated brackets, the user can choose the post height that best suits his exclusion fence.
Our standard StayTight Tension cable can be used on post heights up to 1800mm and can be easily extended to suit posts up to 2 meters.
Post can also be driven in to any depth, whatever is most suited to the soil type or conditions.
As our system does not rely on the position of any predrilled holes, just suit yourself with height, everything will still work.
Price quoted is for one kit. Kit includes...
Stay, Post & Stay Connector, Footplate, & Tension Cable
Discounts apply for bulk kit purchases of 10+ or 60+.
Features:
- Fast install
- Strong & long lasting
- Fire resistant
- Fully adjustable
- No welding
- Rust proof
- Anti-bruise
Specifications:
- Suits round posts
- 50NB (60mm O.D) Stay
- 2.3mm Stay wall thickness
- 3250mm (11') Stay length
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL STAY KITS FOR CORNERS (POST NOT INCLUDED)- 50NB - RSK50

1.5m Funnel Bucket - Made in New Zealand.
Width 1.5 (m)
Capacity 750 (L)
Capacity 0.75 (m³)
Tare Weight 410 (Kg)
Includes Hydraulic Shutter
Optional - Bolt on Front Skirt
Rata Funnel Buckets feature a fully hydraulic actuation system powered by the Loader or Telehandlers 3rd service.
This enables you to load & discharge the material without having to leave the Tractor or Telehandlers cab.
Cutting edges on the Funnel Bucket are made of high tensile wear resistant steel to ensure a long abrasion resistant life.
The buckets side edges & base also feature 10mm wear strips to prevent wear to the 6mm bucket skin itself.
These buckets feature an overall heavy duty build to cope with heavy loads & demanding conditions. Gusseting around hitch areas helps to disperse stress across a greater portion of the bucket back frame.
A flexible canvas chute ensures material is dispensed accurately with minimum spillage or waste. The chute is 400 x 400 for fast unload times when the shutter is fully open.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 1.5M FUNNEL BUCKET (750L) WITH HYDRAULIC SHUTTER

High quality range of augers which feature 6mm flighting, alloy plate boring heads with double cutting edges for greater drilling effectiveness.
Material: 50mm pipe
Finish: Premium enamel top coat.
Flights = 5
Weight = 14kg
Diameter = 152mm or 6 inches
Other sizes (152mm, 203mm, 254mm, 305mm) available as listed on this same website.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 152MM DOUBLE START AUGER

The Nobili SDS 1000 Series Mulchers are designed for mulching grass, cover crops and prunings with double side discharge augers to distribute the material into rows. Height control is maintained by rear roller.
Features:
- Grass and green pruning's to 60mm diameter.
- Construction: Medium profile body and two mulching bars.
- Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with in-built over run clutch, taper locked pulleys and electronically balanced rotor.
- Control: Fixed headstock.
- Attachment: Cat. II three point linkage, floating top link.
- Height Control: Roller with removable ends (standard fitment).
Specifications:
Connection Type: Linkage
HP: 80-150
Hammer Blades: Standard
Working Width: 2,806 mm
Weight: 1460 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI 2.8M SDS (SIDE DISCHARGE) MULCHER (SUIT 80-150HP)

Mesh Gate - 4200mm. (14FT)
All gates are manufactured from 25NB pipe and are a standard 1170mm high.
Features:
- All made with 200mm x 100mm x 5.0m mesh infill
- Available in widths from a 830mm (2'8") personnel gate to a - 4800mm (16') farm gate
- All gates over 2400mm (8') have a vertical 'I' brace and two braces in gates over 4200mm (14')
- 'N' bracing also available for gates over 2400mm (8')
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS MESH GATE - 4200MM (14FT)

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60-130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

14 LPM (12 Volt DC) Flojet Quad Series Pump
LPM: 14
PSI: SW 45 N-BP
P/S/E, 1/2 quad, 9 amps.
No Bypass.
Suits potable water
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FLOJET 14LPM (12 VOLT DC) QUAD SERIES PUMP - 4300-142

When it comes to performance the high output Multicut 820 will go way beyond your expectations delivering a massive 8.2 metres of cutting width to effectively eat your way through the greatest of workloads. Couple the Multicut 820 with a powerful tractor of 150HP plus and allow time to roll by as output in excess of 100 hectares per day is easily achievable.
Key to the performance of the machine is the industry leading flat underside deck to maintain mulch quality and consistency of spread over the full cutting area. A six gearbox driveline delivers exceptional power, each with slip clutch protection and a clean cut is delivered by five rotors each carrying three high-lift swinging blades. Extremely robust in construction the Multicut 820 is configured with large wheels, full width walking axles and hydragas suspension to provide a smooth ride.
Features:
Reinforced mega strength deck structure
Built in shock absorbs
Hydragas suspension
Full width walking axle
Heavy duty axle links
Heavy duty implement tyres
Full width front & rear safety chains
Full length side skids
Hydraulic wing lift & support
Premium long lift shaft drive
Dual stand legs
Swivel towing eye
Universal drawbar for high or low towing
Adjustable levelling tie bars
Slip clutch protection
111HP rotor box
Anti-scalp disc
Heavy duty winged updraught blades
250HP splitter box
Integrated seal protector
Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 4,330kg / 9,546lbs
Hitch: Multi-positional drawbar
Cutting width: 8.06m / 26' 5"
Working machine width: 8.26m / 27' 1"
Transport machine width: 2.81m / 9' 3"
Maximum working length: 6.33m / 20' 9"
Transport length: 6.07m / 19' 11"
Deck height (underside of deck to skid): 0.24m / 10"
Transport height: 3.78m / 12' 5"
Cutting height: 25mm 210mm (1" - 1/16")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 150hp / 112kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1 - 3/4" Z20 SFT 10 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes): 3.5L / 6.2 pints
Gearbox oil capacity (outer rotor gearboxes (x4)): 2.1L / 3.7 pints
Deck construction: All welded construction
Deck material thickness: 5mm (3/16")
Side skirt material thickness: 6mm (4/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 6mm (1/4") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift low friction. Handed.
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 4
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 7 - 12 pneumatic tyre with steel hub
Front & guards: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 820 FLEX WING SLASHER (MIN 150HP)

1.8m Silage Grab (10 tines in base). Made in New Zealand.
Rata Silage Grabs are a multi-task attachment built to perform on your Tractor front end loader, Telehandler (2.2m sizes or larger) or Skid Steer.
With the ability of a fork & the versatility of a grab, this attachment makes bulk silage and bale handling work easy.
Being manufactured from high tensile steel makes it the strongest Silage Grab of its type available on the Australian & New Zealand market.
Rata Silage Grabs are ideal for high volume silage handling. The Grab has been the popular choice on NZ farms for many years due to its high quality build & ability to secure large amounts of silage & leave the stack or pit face clean.
All Rata Silage Grabs feature powerful hydraulic rams that bite through any silage stack and securely clamp the feed, All grabs have x2 rams apart from the ASG120 (1.2m model) which has a single centre mounted ram.
Tines are high quality and manufactured from silicium spring steel by a renowned German manufacturer, these tines are also supported with tapered conus bushes that provide extra support when under load.
With a wide opening width of 1510mm this grab can easily handle large quantities of silage or large bales. The dimension is taken from the tip of the base tine directly to the tip of the top tine.
The pin geometry has been designed to provide maximum pressure possible at every point in the open and close arc. This makes it easier to use with high clamping pressure available at all times.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 1.8M SILAGE GRAB

Low Profile & Strong.
27mm pin. Looking for a secure weld on pin? Our zinc plated pins allow you to install your gate using a minimal amount of pieces.
Want the complete set? Check out our weld-on gate kit for an affordable and secure hinge set.
Why does your 25NB gate have a 27mm pin?
25NB gates used to need 25mm pins. However, the new standard 25NB gates have thinner walls, which means a slightly larger internal diameter. If you use a 25mm pin, your new gate will move around a fair bit as the pin wont be a snug fit. A 27mm pin fit tighter on your 25NB gate, helping it to swing more smoothly.
Price quoted is for one pin only.
Discounts apply for bulk purchases of 10+
Contact dealer for bulk pricing.
Specifications:
- 25NB gate
- 27mm pin
- Saddle not included
- Zinc plated
Features:
- Strong & secure
- Weld on
- Low profile
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL U TYPE PIN WELD-ON 25NB - UWOBP25

Find Farm Machinery For Sale in Coopers Plains. Browse 7624 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

NOBILI 1.5M BNE MULCHER (40-95HP)

MURRAY 2.28M KINKED SPRING TINE 3 RANK HARROW MEDIUM DUTY COMPLETE UNIT - SERIES 06

ROTECH RURAL STAY KITS FOR CORNERS (POST NOT INCLUDED)- 50NB - RSK50

RATA 1.5M FUNNEL BUCKET (750L) WITH HYDRAULIC SHUTTER

SILVAN 152MM DOUBLE START AUGER

NOBILI 2.8M SDS (SIDE DISCHARGE) MULCHER (SUIT 80-150HP)

LEMPRET WIRE & SEALANTS MESH GATE - 4200MM (14FT)

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

FLOJET 14LPM (12 VOLT DC) QUAD SERIES PUMP - 4300-142

FIELDQUIP MULTICUT 820 FLEX WING SLASHER (MIN 150HP)

RATA 1.8M SILAGE GRAB

ROTECH RURAL U TYPE PIN WELD-ON 25NB - UWOBP25

Farm Supplies Machinery & Equipment

Dealer Address