Farm Supplies Machinery & Equipment

Earth tooth (left hand) wear part to suit XHD trencher range.
Auger Torque provide a range of wear parts to ensure your trencher is always performing at its optimum efficiency.
All Auger Torque hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE EARTH TOOTH (LEFT HAND) WEAR PART TO SUIT XHD TRENCHER RANGE

Low Profile & Strong Saddle.
Looking for a secure weld on saddle? Our zinc plated saddles allow you to install your gate using a minimal amount of pieces.
Want the complete set? Check out our weld-on gate kit for an affordable and secure hinge set.
Price quoted is for one saddle only.
Discounts apply for bulk purchases of 10+
Specifications:
- 25NB gate
- Pin not included
- Zinc plated
Features:
- Strong & secure
- Weld on
- Low profile
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL U TYPE SADDLE WELD-ON 25NB - UTS25

Heavy duty cracker ripper / subsoiler with shearbolt breakout for breaking up pans and compacted soils. Suitable for tractors from 200 to 350 hp.
Specifications:
Working Width: 360cm
Required HP: 240-350hp
Weight: 2595kg
No of Blades: 9
Features:
16mm shearbolt breakout
Double spike roller
Hydraulic depth control
650mm working depth
70 x 18mm point
Foot stands
Category three linkage
Fin clod busters
Options in Lieu of Standard:
Pivoting side plates
Models:
ALCE-P300/7 310cm Working Width 200-350HP 2350kg 7 Points
ALCE-P350/7 360cm Working Width 220-350HP 2475kg 7 Points
ALCE-P350/9 360cm Working Width 240-350HP 2595kg 9 Points
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

CELLI 3.6M (240-350HP) ALCE-P RIPPER / SUBSOILER

Rata 1.2m Bale Fork. Made in New Zealand.
This model of Bale Fork is the 'standard' or 'conventional' model, designed for use on just about any dairy or livestock farmers tractor.
A Telehandler spec model is also available upon request.
Tine Width = 1.2m
Machined Conus 2 Taper Cones
German Forged Spring Steel Tines
Small Centre Tine included
Frame is fully Welded RHS
Tines are forged spring steel, held in with a conus 2 welded taper bush. These high strength bale forks can be made to fit almost any Tractors front end loader or Telehandler
Tine length is from the overall length of the tine, from the nut right out to the point. This means that a 0.98m long tine has around 850mm of usable length to spear into a bale. The other 130mm of the tine is inside or behind the backframe.
Measurements are approximate.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA 1.2M EURO HITCH BALE FORK

Murray Welding square small -117 x 117 x 50mm - 90 degrees - Series 72.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY WELDING SQUARE SMALL -117 X 117 X 50MM - 90 DEG - SERIES 72

LEMPRET WIRE & SEALANTS SNAKE MESH - 900MM HIGH X 5M LONG

20mm Weld on Pins & Sleeves
Australian made.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

LEMPRET WIRE & SEALANTS 20MM WELD ON PINS & SLEEVES (SINGLE ASSEMBLY)

A rugged, extra tough slasher built to take real punishment from continuous work ideal for contractors.
Features:
Extra strong build 6mm top plate with exceptionally strong perimeter and centre tubular crossmembers where it counts.
Adjustable skids. Contractor option fitted with additional runner for wear.
Two-pack paint finish. Contractor option has hot dipped galvanised body.
Headstock made from heavy angle and RHS and fitted with floating (toggle) top link. Optional chain stays available.
Bondioli & Pavesi (Italian) Series 8 pto driveshaft with integrated 4 plate slip clutch protects slasher and tractor. An integrated clutch means less wear between the clutch and pto shaft.
110 HP oil lubricated Italian Comer gearbox with 1:1.5 ratio and excellent seal protection with 5 Year Manufacturers Warranty.
Straight reversible 100 x 12mm Boron slasher blades are standard with stepped configuration as an option. All bushes are through hardened. Made in Australia, the blades are hardened and tempered in the 40-45 Rockwell range. This range gives excellent hardness while delivering strength and fatigue resistance. Any harder and they potentially become brittle.
Hardened and tempered spring steel rotor blade assembly. Bolt head protection on contractor option allows easy changeover of blades.
Dual puncture proof solid rubber wheelkits enable easy depth control. Standard with contractor option.
Front and rear chain kits are standard with easy to replace chain pieces.
Specifications:
Adjustable Skids
Front and Rear Chains
Cutting Width 2050mm
Overall Width 2200mm
Tractor HP 75+
Cutting Height 25-100mm
Weight 635kg
Options:
0089 EHD210 with adjustable skids offset
0099 Wheel Kit suit EHD210 Solid Rubber Wheel
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS EHD210 SLASHERS 2.1M - 0097- 75+HP

Designed for most well body utilities such as Ford Ranger, Toyota Hilux, BT-50, Triton, Nissan Navara, Isuzu Demax and VW Amarok.
The height of the Dieselcube makes diesel transfer effortless in these vehicles.
All Dieselcube models have an internal baffle to reduce surge when travelling.
Available in 200L (this model), 400L & 600L.
Specifications:
Tank Size (L): 200
Pump Size (L/min): 40
Height / Width / Length (mm): 625 / 660 / 800
Features:
- Polytuff tank with fork pockets to allow operators to move the tank (when empty)
- Heavy duty lockable cover with stand to assist when operating
- 12V Selecta Power 40L/min open flow pump with internal suction filter
- 4m 3/4" delivery hose & auto shut-off trigger
- Tank level indicator (400L & 600L)
- 3m wiring harness with alligator clips for 12V connection crimped fittings
- 4m wiring harness with alligator clips
- Low profile design for clear rear view from utility
- Each tank is baffled to reduce surge when traveling
Options:
PF26-X3 - Digital Litre Counter (Customer Fitment)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 200L DIESEL CUBE TRANSFER UNIT

Mesh Gate - 830mm. (2ft 8 inches)
All gates are manufactured from 25NB pipe and are a standard 1170mm high.
Features:
- All made with 200mm x 100mm x 5.0m mesh infill
- Available in widths from a 830mm (2'8") personnel gate to a - 4800mm (16') farm gate
- All gates over 2400mm (8') have a vertical 'I' brace and two braces in gates over 4200mm (14')
- 'N' bracing also available for gates over 2400mm (8')
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS MESH GATE - 830MM (2FT 8 INCHES)

2.79m Murray Series 03 Levelling Harrow 3 Rank Deep Sections & Standard Drawbar, Heavy Duty. Complete Set.
3403 - 2.79m (9ft 2in) - 4/9 Tine - 46kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

Series 08 Stump Jump Harrow System with Standard 4 point pull drawbar - Complete Set.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and 4 Point Pull Drawbar.
8102 - 2 Section with bar 1.72m (5ft 8in).
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 1.72m (5ft 8in).
- Weight 97kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 1.72M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

Find Farm Machinery For Sale in Coopers Plains. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

AUGER TORQUE EARTH TOOTH (LEFT HAND) WEAR PART TO SUIT XHD TRENCHER RANGE

ROTECH RURAL U TYPE SADDLE WELD-ON 25NB - UTS25

CELLI 3.6M (240-350HP) ALCE-P RIPPER / SUBSOILER

RATA 1.2M EURO HITCH BALE FORK

MURRAY WELDING SQUARE SMALL -117 X 117 X 50MM - 90 DEG - SERIES 72

LEMPRET WIRE & SEALANTS SNAKE MESH - 900MM HIGH X 5M LONG

LEMPRET WIRE & SEALANTS 20MM WELD ON PINS & SLEEVES (SINGLE ASSEMBLY)

JOHN BERENDS EHD210 SLASHERS 2.1M - 0097- 75+HP

SILVAN 200L DIESEL CUBE TRANSFER UNIT

LEMPRET WIRE & SEALANTS MESH GATE - 830MM (2FT 8 INCHES)

MURRAY SERIES 03 LEVELLING HARROW 2.79M, 3 RANK DEEP SECTIONS & STD DRAWBARS-HEAVY DUTY-COMPLETE SET

MURRAY 1.72M STUMP JUMP HARROW WITH STD 4 POINT PULL DRAWBAR COMPLETE SET- SERIES 08

Farm Supplies Machinery & Equipment

Dealer Address