Farm Supplies Machinery & Equipment

NorthStar® Spot Sprayer for treating small areas with precision. Available in 38 litres, 60 litres and 98 litres capacity along with A commercial-grade NorthStar NSQ Series sprayer on-demand pump provides faster priming and longer life. 100% continuous duty rating. Honeywell MICRO SWITCHTM for enhanced durability & efficiency.
Sprayers come with a spray gun adjustable nozzle from cone to stream shooting up to 5.7m vertical and 9.1m horizontal (60L & 98L 38L provides 2.3m vertical and 7.6m horizontal). A 4.5m clear polyvinyl chloride hose makes monitoring chemical flow simple. Large152mm, diameter tank lid for easy filling.
Unique pressure switch design slowly cycles the pump for less switch and motor wear. SantopreneTM diaphragm and Viton® valves have superior reliability and chemical resistance.
Features:
- 12V NorthStar NSQTM Series on-demand pump provides faster priming and longer life
- Spray gun with adjustable nozzle shoots 5.7m vertica and 9.1m horizontal (60L & 98L only)
- Tank-bottom drain allows for easy draining
- Components have been tested and approved for use with Roundup® agricultural herbicide
- Proprietary tank design features extra-thick walls and superior chemical and UV resistance
- Honeywell MICRO SWITCHTM enhances durability and efficiency
- Tie-down straps for easy mounting
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NORTHSTAR 38L SPOT SPRAYER (3.8LPM)

225mm 4 Series auger (Standard conditions - Tungsten Carbide) up to 5T for Ramdrill PTO - Hydraulic Downforce.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 225MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

The Spring Balancer is a mechanical device designed to support and balance the weight of tools or equipment in various industrial and manufacturing applications.
It features a rugged housing enclosing a pre-tensioned spring that exerts an upward force, counteracting the weight of the suspended load. This allows for effortless lifting and precise positioning of tools, reducing operator fatigue and increasing productivity.
The Spring Balancer is commonly used in assembly lines, workshops, and other settings where repetitive tasks are performed, providing a safe and efficient solution for tool handling and manipulation.
Features:
- Heavy duty light weight aluminium housing
- Easy worm gear adjustment
- Reduces operator fatigue
- Fall arrest safety drum lock
- Heavy duty hooks
Specifications:
- Load rating: 15-22kg
- Cable length: 1.5m
- Weight: 7.7kg
- Cable Diameter: 4.8mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH COUNTER BALANCE SPRING (15-22KG)

Pick Up Reel Band.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PICK UP REEL BAND - 860MM LENGTH, 50MM WIDTH

Australian designed & manufactured Post Puller - with PostPulla patented design, pulling stubborn posts, poles and droppers has never been easier.
All products are made using the best quality Australian steel & components and also manufactured in South Australia so durability will never be an issue. PostPulla specific use in the winery region is second to none, as well as the many farms and agricultural industries.
Sizes:
60mm - Star Picket
75mm - Universal/Maxi Post
125mm - Small Post
170mm - Medium Post
300mm - Large Post
Adaptor - Chocker Plate (reducer) also available to suit 300mm Post Pulla
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POWERTECH 75MM POST PULLER

Reversible Plough Point specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX REVERSIBLE LH PLOUGH POINT (OVERUM)

The award winning range of Cyclone Mowers has been designed to do the work of a flail mower but requires a fraction of the power and fuel that a flail mower would consume.
These machines are strong, rugged and robust; specifically designed for use in set-aside, forestry margin management and sensitive environmental scrubland control. This machine easily copes with the toughest of conditions including shrub, saplings, gorse and brush.
It is ideal for the clearance of arable stubble, maize and rapeseed crops.
Strenx 700 MC high-strength steel is used in the manufacture of these machines. This material is stronger than steel traditionally used in machinery manufacturing.
The undersole discs are produced from Hardox 450, a wear and abrasion resistant steel.
An optional side shift unit is available which allows the operator.
Features:
Can be front or rear mounted (to be specified when ordering)
Patented blender double chop blade system
25 percent less power and fuel consumption required than a similar sized flail machine Impact shock reducing swinging hardened spring steel blades
Low maintenance machine with less wearing parts than a flail mower
Heavy duty rear roller
Model:
MJ30-420 - 4.20m (13ft 9in) - 1,265 kg - 90-150HP - 6 Rotors
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MAJOR 4.2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - SINGLE WING : 100-150HP

Ball Valve Tap Kit 1 1/2" including Camlocks
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS BALL VALVE TAP KIT 1 1/2" INCL CAMLOCKS

For best results the Aervator requires two factors:
Weight. Weight is built into our heavy-duty, over-spec Australian steel frames. If you find your tines are not fully penetrating the soil you have a compaction issue but don't worry we have you covered, just add our optional concrete blocks and those tines will dig into even the most compact paddocks in as little as two passes.
Speed. The Aervator ideally needs to travel at 7 - 10 kph for the tines to achieve the shattering effect.
The One Pass Renovation System Aerator is used neutrally or offsets for maximum aggression. All while seeding and covering at the same time. Perfect for minimum-till operations or those on a budget.
Proudly manufactured in Australia. The GH series of Aervator are the workhorse of the Aervator range - Aeration, Renovation, Cultivation, Oversowing & Compaction Relief.
Specifications:
Size: 3000mm
Cultivation Width: 2750mm
No. Tines Per Rotor: 3 or 4
Rotors Per Gang: 8
No. Gangs: 2
Mounting: Linkage
Approx Weight: 900
Min HP Req: 85
Standard Features:
- Hot dipped galv finish
- Two rows of gangs
- Tines are spaced at 95mm
- Large rotor bearings
- Multi-gang system
- Aeration and cultivation settings
- Gang angle adjustable from 0-10 degrees.
- Gang adjusting spanner supplied
- Rear tow hitch
- Cat 1-2 pick up
- Built-in weight trays
Available Configurations:
- 3PL or trailing
- Fixed or Folding frame
- 2.4 to 5-meter working width
Technik Plus OKO Turbo 5 Airseeder Speficiations:
- Multi-functional stainless steel seeding unit
- Selective 3, 4 or 5 outlet tubes (diameter 30mm)
- Hoses and spreader plates (diameter 30mm)
- 12v electric turbine
- 90L or 130L plastic hopper
- 12v drive from the tractor battery
- Adjustable Flaps
- Electric seed roll motor
- Standard seed roll agitator
- Working width 1-4m (depending on seed & mounting height)
Includes Profi Control Box (in cab)
- On/off
- Stepless adjustment of seed roll (output amount)
- On/off sensor and seed shaft rotation control sensor
- Calibration
Optional:
- Seed roll for a small amount
- Metal seed roll
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES 3M ONE PASS RENO SYSTEM. MIN 85+ HP (3PL)

The fast-lock pulley system special feature is the simple rope-operated locking mechanism which prevents the rope going backwards. This allows you to take the load in a series of purchases as required.
The lock is automatically engaged as the rope is pulled.
The componentry is all stainless steel with the pulleys cut from hi-density nylon.
The rope is 7.2m of thick and soft 10mm diameter nylon.
Easy on the hands.
Suitable for lifts up to 200 kg.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF FAST-LOCK PULLEY SET

This range of mulcher is ideal for all mowing and mulching with small and compact tractors of 12 to 35 hp from cutting fine lawns to high grass or light vegetation.
The MU-C mulchers display their overall versatility, their good cutting and mulching quality and their robust construction.
Features:
Manufactured from High Quality QSt/E Steel with centre mounted Cat. I Headstock for rear mounting.
Rear mounting: Gearbox with integrated over run clutch for 540 / 1000 r.p.m. (distance of the ground to P.T.O. shaft cc. 50 cm).
Front mounting: Low positioned gearbox with integrated over run clutch for 1000 r.p.m. (2000 r.p.m. possible as option) (distance of the ground to P.T.O. shaft cc. 25 cm).
Belt protection with tension measuring slot.
Shackle M Carbide flails to ensure long life, clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles; bearings protected against dirt, wear and tear.
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.
High tempered spring steel one way protection flaps in front of the mower hood.
Skids
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and removable shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
P.T.O. shaft and Guarding to ISO Standards.
Options:
2 point Linkage parts to original mower deck linkages for Front Mowers (Iseki SF 230 etc.) instead of Head Stock Cat.I (only for MU-C 100 and
MU-C 120 available).
Special Carbide wearing skids, removable (Rear mounting only).
Height adjustable rubber wheels, 360º swivel in front of the mulcher.
Hydraulic Weight Transfer MU-SOFA, for Front mounting recommended.
Mount for municipal quick-coupling triangle (installed on implement) for front mounting.
3-point trestle (Cat 1) Alpine for converting rear-mounted MU-C to front mounting for carrier vehicles, 540 rpm or 1000 rpm (MU-C 140-160)
Linkage parts for Shibaura CM 214
Modification to different RPM
Second screw-type short chopping bar system with "shark fin" design-a Muthing patent (only for front mounting)
Hood wear plate (factory mounted)
Models:
MU-C080 WW-800mm Overall width-970mm Max hp-35 Weight 140kg Flails 12
MU-C100 WW-1000mm Overall width-1170mm Max hp-35 Weight 160kg Flails 16
MU-C120 WW-1200mm Overall width-1370mm Max hp-35 Weight 180kg Flails 20
MU-C140 WW-1400mm Overall width-1570mm Max hp-35 Weight 200kg Flails 24
MU-C160 WW-1600mm Overall width-1770mm Max hp-35 Weight 220kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 120CM MULCHER SUITS UP TO 35HP MU-C120

600MM 4 Series auger up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 600MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Find Farm Machinery For Sale in Coopers Plains. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

NORTHSTAR 38L SPOT SPRAYER (3.8LPM)

DIGGA 225MM AUGER (STANDARD- TUNGSTEN) FOR RAMDRILL PTO - HYDRAULIC DOWNFORCE

POWERTECH COUNTER BALANCE SPRING (15-22KG)

SPAREX PICK UP REEL BAND - 860MM LENGTH, 50MM WIDTH

POWERTECH 75MM POST PULLER

SPAREX REVERSIBLE LH PLOUGH POINT (OVERUM)

MAJOR 4.2M MJ30 CYCLONE RANGE ROTARY SLASHER/MULCHER - SINGLE WING : 100-150HP

RAPID PLAS BALL VALVE TAP KIT 1 1/2" INCL CAMLOCKS

AERVATOR GH SERIES 3M ONE PASS RENO SYSTEM. MIN 85+ HP (3PL)

SHOOF FAST-LOCK PULLEY SET

MUTHING 120CM MULCHER SUITS UP TO 35HP MU-C120

DIGGA 600MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD - HYDRAULIC DRIVE

Farm Supplies Machinery & Equipment

Dealer Address