Farm Supplies Machinery & Equipment

Built for reliability, the Gentech range of diesel-powered portable generating sets and welder generators deliver economy and durability unmatched by comparable petrol engines.
Perfect for small appliances (e.g. small air conditioners) and small handheld tools (e.g. 9 grinders, cut-off saws).
Specifications:
Model Rating 0.8pf @ 50Hz: 6.8 kVA
Alternator Rating: 7 kVA
Engine Model: Yanmar L100N5
Engine Speed: 3000 rpm
Phase: 3-Phase
Noise Level @ 7m: 80 dBA
Outlets: 1 x 20 Amp 3PH 5PIN, 2 x 15Amp 1PH
Approx. Fuel Consumption @ 80% Load: 1.65 L/hr
Operation Hours @ 80% Load: 3.3 hrs
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 6.8 KVA DIESEL GENERATOR (ELECTRIC START - 240 / 415V)

Calving Chain Stainless Steel Long - 150cm.
These are our best quality chains. The 150cm chain features an intermediate loop-link for greater versatility especially when used with a pulling device.
160kg tested breaking strain.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF CALVING CHAIN STAINLESS STEEL LONG - 150CM

Fine luxury bathroom soap with wonderful 'champagne' lather.
Made in New Zealand with only finest natural ingredients, including honey, lanolin, sunflower oil, oatmeal, goats' milk and natural scenting oils.
Available in 4-packs only. These are for home use.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HENRIETTA LAVENDER 4-PACK OATMEAL BATH SOAP

Swather / Tedder Tine.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GRANGE & WALTER SWATHER / TEDDER TINE (RH & LH) - 612MM LENGTH - REPLACEMENT FOR KUHN

This generator is perfect for housing installations, running compressors, welders and much much more. With an Automatic Voltage regulator (AVR) this generator is designed to maintain a consistent voltage level, causing it to be less likely to damage sensitive equipment.
It comes standard with 2 x 15 Amp outlets. Optional extras include wheel kits.
Specifications:
Power Rating: 10kVA
Cont. Output Watts: 8000
Engine Model: Honda GX630 V Twin
Phase: 1-Phase
Starting System: Electric
Fuel Tank Capacity: 34L
Noise Level @ 7m: 75dBA
Outlets: 2 x 15 Amp
Operation Hours @ 80% Load: 5.65hrs
Fuel Type: Petrol
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

GENTECH 10 KVA AVR PETROL GENERATOR (ELECTRIC START)

Lower Link Ball (Cat. 1/1).
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOWER LINK BALL (CAT 1/1) (ID: 7/8'', OD: 1 25/32'', WIDTH: 1 3/8'')

This rear mounting hydraulic folding six metre mulcher is German engineering at its best.
Ideal for both pasture and stubble management along with general wide area mulching.
Manufactured from high quality QSt/E Steel with Headstock Cat. II & III for rear mounting.
Recommended for tractors 140-250HP.
Four rubber trailing wheels with 360° swivel.
Features:
Manufactured from High Quality Qst/E Steel with Headstock Cat.II & III for rear mounting.
Four rubber wheels, 360° swivel, height adjustable, 23X10.50-12.
Gearbox with integrated over run clutch for 1000 r.p.m.
Automatic belt tensioning.
Hood wear plates.
Hydraulic transport safety lock at an angle of 90°.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power
Well balanced spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Patented removable shredding bar System : Shark Fin.
Carbide wearing skids, removable.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the wheels guarantees perfect contour following and an even quality of cut.
Two single acting spool valves requested.
PTO shaft with cap bottom lubrication.
Warning signs and lights (LED mounted).
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Scrapper rail for MU-M/F 600 Vario (2 units must be ordered for entire working width).
Additional protection device for heavy duty work in extremely stony conditions.
Second screw-type short chopping bar system: "shark-fin design" - A Muthing patent (2 units must be ordered for entire working width).
Hydraulic powered central strip mulcher.
Operating hours counter with sensor, time recording via angular momentum.
Quick-hitch adapter, Cat. 3.
Model:
MU-M600 41.1 (4 Wheels) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
MU-M600 41.2 (Support Rollers) 6000mm 250 HP WW 6000mm Overall width 6200mm Weight 2500kg Flails 52
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

Hydraulic Cross Shaft.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC CROSS SHAFT

PTO Adaptor.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PTO ADAPTOR WITH QUICK RELEASE PIN - 1 3/8" FEMALE SPLINE, 6 X 1 3/8" MALE SPLINE

45L Fence Drinker (No Float) Including Cover and 2" Bung
Features:
45 litre 1 piece moulded drinker plus cover
Immensely strong construction
Galvanised steel mounting brackets
2 drain bung for easy cleaning
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID PLAS 45L FENCE DRINKER (NO FLOAT) INCL COVER AND 2" BUNG

ARS Stemgrip rose Cut & Hold Pruner - 20.5cm
- 210mm long
- Weight: 230g
Features:
- Professional quality, robust secateurs of simple design.
- Ideal for medium and large hands.
- Marquench hardening gives the blades the best steel structure and durable cutting performance.
- Razor sharp, hard-chrome plated blades for rust and sap resistance.
- Has stem-grip device for holding stems of fruit or cut flowers.
Replacement blades and other spare parts available.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ARS STEMGRIP ROSE CUT & HOLD PRUNER - 20.5CM

Manual Top Link.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK (CAT 2/2) (740MM MIN LENGTH, 970MM MAX LENGTH)

Find Farm Machinery For Sale in Coopers Plains. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

GENTECH 6.8 KVA DIESEL GENERATOR (ELECTRIC START - 240 / 415V)

SHOOF CALVING CHAIN STAINLESS STEEL LONG - 150CM

HENRIETTA LAVENDER 4-PACK OATMEAL BATH SOAP

GRANGE & WALTER SWATHER / TEDDER TINE (RH & LH) - 612MM LENGTH - REPLACEMENT FOR KUHN

GENTECH 10 KVA AVR PETROL GENERATOR (ELECTRIC START)

SPAREX LOWER LINK BALL (CAT 1/1) (ID: 7/8'', OD: 1 25/32'', WIDTH: 1 3/8'')

MUTHING MU-M600 MULCHER - HYDRAULICALLY FOLDING INC 4 SUPPORT WHEELS

SPAREX HYDRAULIC CROSS SHAFT

SPAREX PTO ADAPTOR WITH QUICK RELEASE PIN - 1 3/8" FEMALE SPLINE, 6 X 1 3/8" MALE SPLINE

RAPID PLAS 45L FENCE DRINKER (NO FLOAT) INCL COVER AND 2" BUNG

ARS STEMGRIP ROSE CUT & HOLD PRUNER - 20.5CM

SPAREX TOP LINK (CAT 2/2) (740MM MIN LENGTH, 970MM MAX LENGTH)

Farm Supplies Machinery & Equipment

Dealer Address