Farm Supplies Machinery & Equipment

For front mounting vehicles without PTO Müthing supplies the MU-FM/Hydro flail mulcher with a powerful hydraulic motor.
As the basic professional model of the MU-FM/Hydro has the same build as the MU-FM. It of course also possesses the same impressive operating and quality advantages as the MU-FM, comparable versatility and identical optional equipment.
The drive of this mulcher requires an oil volume of 35 L/mIn at a pressure of about 180 bar up to a max of 70 LPM.
This means that the MU-FM/Hydro can be used both on yard loaders and special hydro traction vehicles. A large selection of mounting adapter plates for these vehicles simplifies mounting and optionally available hydraulic control blocks (spool) facilitates mounting onto vehicle hydraulic systems for oil volumes in excess of 48 L/min.
Features:
Manufactured from High Quality QSt/E Steel for front mounting for skid steering loaders.
Hydraulic drive for a volume flow from 35-70 l/min, with over run valve.
Belt protection with tension measuring slot.
Shackle M Carbide flails.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin
Roller with rounded edges to preserve the soil and turf and to carry the flail with variable height adjustment.Side, wearing skids.
Carbide wearing skids, removable.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Hydraulic spool valves required: 1 x pressure flow, 1 x pressure less return flow (max. counter-pressure < 20 bar).
Hydraulic hoses without couplings.
Height Adjustable support wheels, 360 deg swivel in front of flail
Options:
Mounting plate for yard loaders (linkage parts to loader not included)
Mounting plate for yard loader Avant
Mounting plate for yard loader with EURO-3-socket
Mounting plate for yard loader Schaffer with old socket
Mounting plate for yard loader Schaffer with socket SWH
Mounting plate for yard Weidemann with hydraulic locking
Mounting plate with hydraulic side shift 700mm to the right not for a specific vehicle
Screw on socket for Avant, only in combination with MU-FMZ072
Screw on socket for EURO 3, only in combination with MU-FMZ072
Screw on socket for Schaffer old socket, only in combination with MU-FMZ072
Screw on socket for Schaffer SWH, only in combination with MU-FMZ072
Screw on socket for Weidemann with hydraulic locking, only in combination with MU-FMZ072
Hydraulic Comtrol Spool (for oil flow over 48L/Min) Headstock with A frame Cat. 0
Headstock with A triangle Cat. 1 N
Second Patented removable shredding bar system: "Shark Fin"
Hood wear plate (factory mounted)
Thatch blades
Vertically adjustable rear support wheels, 360 deg swivelling, instead of support roller ( only MU-FM Hyrdo 140-160) additional charge
Models:
MU-FM 120-Hydro WW 1200mm Overall width 1450mm Oil-slow 35-70 l/min Weight 201kg Flails 20
MU-FM 140-Hydro WW 1400mm Overall width 1650mm Oil-slow 45-70 l/min Weight 217kg Flails 24
MU-FM 160-Hydro WW 1600mm Overall width 1850mm Oil-slow 45-70 l/min Weight 232kg Flails 28
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING 140CM MULCHER WITH HYDRAULIC DRIVE - SUITS 35-70 LPM - MU-FM140

PTO Coupling specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WEASLER PTO COUPLING (U/J SIZE: 23, 8 X 61, 2MM) - TRIANGLE PROFILE

The GH-5004 Aervator is a high utility farm implement that relieves compaction, aerates, cultivates and renovates. It can function as a rotary hoe, a disc, a roller and a harrow and increases the effectiveness of water and fertiliser.
Product Features
Aerate, Renovate & Maintain 00 Neutral Setting
The axle is straight
This is used when the soil structure is very friable.
The tines will usually penetrate their full depth.
This setting is usually used to maintain the soil structure, possibly once a year in a maintenance program.
Aerate & Renovate 2.50 Setting
The axle has 2.5 degrees of angle
This is ideal for your first use of the aervator.
If your ground is hard the tines may not penetrate very far, maybe only 25-50 mm.
Dont worry, this is normal. Aeration is not a quick fix.
Aerate & Renovate 50 Setting
The axle has 5 degrees of angle
Use this setting for subsequent uses of the aervator.
With each pass you should change the direction of travel.
Across then diagonally is ideal.
Cultivate & Renovate 7.50 Setting
The axle has 7.5 degrees of angle
On this setting the aervator starts to get aggressive.
You may require additional weight or ballast to acheive maximum depth.
This setting is best used after previous passes and will fracture any compaction layer.
If used on extremely hard ground the tines will probably not penetrate very far.
Cultivate 100 Setting
The axle has 10 degrees of angle
On this setting the aervator is very aggressive.
Again use weight.
This setting is best used after previous passes and will fracture any compaction layer.
If used on hard ground the tines will probably not penetrate very far.
Equipment Options
Trailing kits for all models
Hard facing tine option
Hydraulic folding wings
Removable concrete weights
Turf tines
Larger models available up to 12m
Aeration requires multiple uses of the aervator to achieve results.
Depending on your soil structure, this could take 12-24 months.
The ideal time to use is autumn and spring depending on your rainfall.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR GH SERIES 5M - GH-5004. MIN 110+HP

Seeder Tine.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GRANGE & WALTER SEEDER TINE - 400MM LENGTH

Manual Top Link.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPENCO TOP LINK (CAT 1/2) (670MM MIN LENGTH, 830MM MAX LENGTH)

Electric start.
Builders and farmers find this generator ideal for general all-round performance with lots of grunt for welders, compressors and other heavy duty equipment (e.g. wool presses, medium sized and medium sized air conditioners). Featuring a 34 litre fuel tank built into the base and an electric starting system, this generator is a winner at home, on the Ute or in the shed.
Specifications:
Power Rating: 9.5 kVA
Model Rating 0.8pf @ 50Hz: 9.5 kVA
Alternator Rating: 9.5 kVA
Engine Model: Honda V Twin GX630
Phase: 1-Phase
Starting System: Electric start
Fuel Tank Capacity: 34 L
Noise Level @ 7m: 75 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 8.84 L/hr
Operation Hours @ 80% Load: 7.11 hrs
Fuel Type: Petrol
Diam.: 876 x 546 x 700 mm (L x W x H)
Weight: 110 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 9.5 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

Lower Link Dual Category Ball (Cat. 2 Outer, 1/2 Inner).
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LOWER LINK DUAL CATEGORY BALL (CAT 2 OUTER, 1/2 INNER) (ID: 7/8 - 1 1/8'')

200mm - 3 Series Auger up to 5T for 3 point linkage. Heavy conditions-(MFT) Multi Facet Tungsten-Hard ground.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 200MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

PTO Shaft.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GARDLOC PTO SHAFT - 1,010MM LZ LENGTH, 1 3/8" X 6 SPLINE Q.R. TO 1 3/8" X 6 SPLINE FRICTION DISC CLUTCH

Shear Bolt.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SHEAR BOLT (10 PCS.) - IMPERIAL - 38MM LENGTH, 7/32" THREAD SIZE

Ball Hitch Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SHORT BALL HITCH PIN (500KG)

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HIGH BACK BALE FRAME - 2 X M28 X 1,100MM CONUS 2

Find Farm Machinery For Sale in Coopers Plains. Browse 7576 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

MUTHING 140CM MULCHER WITH HYDRAULIC DRIVE - SUITS 35-70 LPM - MU-FM140

WEASLER PTO COUPLING (U/J SIZE: 23, 8 X 61, 2MM) - TRIANGLE PROFILE

AERVATOR GH SERIES 5M - GH-5004. MIN 110+HP

GRANGE & WALTER SEEDER TINE - 400MM LENGTH

SPENCO TOP LINK (CAT 1/2) (670MM MIN LENGTH, 830MM MAX LENGTH)

GENTECH 9.5 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

SPAREX LOWER LINK DUAL CATEGORY BALL (CAT 2 OUTER, 1/2 INNER) (ID: 7/8 - 1 1/8'')

DIGGA 200MM AUGER (HEAVY-HARD GROUND) FOR 3 POINT LINKAGE

GARDLOC PTO SHAFT - 1,010MM LZ LENGTH, 1 3/8" X 6 SPLINE Q.R. TO 1 3/8" X 6 SPLINE FRICTION DISC CLUTCH

SPAREX SHEAR BOLT (10 PCS.) - IMPERIAL - 38MM LENGTH, 7/32" THREAD SIZE

SPAREX SHORT BALL HITCH PIN (500KG)

SPAREX HIGH BACK BALE FRAME - 2 X M28 X 1,100MM CONUS 2

Farm Supplies Machinery & Equipment

Dealer Address