Farm Supplies Machinery & Equipment

Tedder haytine.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GRANGE & WALTER TEDDER HAY TINE (RH) - 369MM LENGTH - REPLACEMENT FOR LELY

Burder Quick Change Upgrade (only) to suit JD 640 Spring Bracket when ordered with loader. Includes Mounts to Suit on 1 Attachment.

BURDER FEL QUICK CHANGE UPGRADE (SUIT JD 640 SPRING BRACKET)

Suitable for ROPS and CAB (optional). 

The Burder loader series are built to be tough, agile and performs well even under extensive usage.

The Burder loader series comes with a multitude of features such as return to level, soft ride and quick change. These features helps to promote safety, efficiency and productivity in the work environment. As the industry evolves, consumers require more complex features in the loaders in order to enhance productivity in the work environment.

Burder invests resources in R&D to ensure consumer demands are met as well as constantly creating designs that exceed expectations.

BURDER 1.8M BURDER FRONT END LOADER (50-100 HP)

- 3/4" Filter Assembly with 30 mesh Element.
- 14 Bar / 210 psi maximum pressure rating.
- BSPT female inlet / outlet - Polypropylene construction.
Colour = Red
Flow Rate up to 87 L/min
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3/4" FLUSH-OUT LINE STRAINERS (30 MESH)

325mm - 3 Series Auger up to 5T for 3 point linkage. Light conditions - Earth.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: 3PT Linkage
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 325MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

Aluminium Loading Ramps Standard (external width 360mm) - 3m long - Suitable for rubber tyres and rubber tracks only.
Capacity @ wheelbase: 2.0 tonne @ 1m
Price inclusions: set of ramps, 2 pins and clips.
A light weight aluminium loading ramp with enhanced safety that delivers on quality, performance, and is cost effective. European designed and engineered, the Digga loading ramps feature the most advanced design in the Australian market today.
Digga's aluminium loading ramps include a standard range (1t to 6.2t) and a Universal range (5.2t to 9t). The ramps are used to load excavators, skid steer loaders and mini loaders on trailers, tipper trucks and flat beds.
Features & Benefits:
- Patented extruded double T-rail with interlocking rungs
- 3 different connection methods
> Pin (supplied)
> Tongue (supplied)
> Chain (chain not supplied)
- Enhanced beam strength
- 18 Month Warranty
- CE and TUV certification
- New stronger rung design
- Reinforced bottom and top rungs
- Length of reinforcement differs on every ramp model
- Low to the ground bottom rung
- Superior strength & durability
Standard Loading Ramp Range:
- Suitable for rubber tyres and rubber track machines
- Rung design prevents clogging up with mud, stones, and other debris reducing the risk of tyre/track slippage
- New rung design cleans the wheels/tracks as machines climb the ramp, minimising debris taken onto the truck
- New rung design allows operators to safely walk up the ramp
- Smoothest ride of any ramp on the market.
Specifications:
- Capacity @ wheelbase: 2.0 tonne @ 1m
- Beam Height: 100mm
- Int width: 300mm
- Ext width: 360mm
- Length: 3m
- Weight (per ramp): 23kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

DIGGA LOADING RAMPS ALUMINIUM STANDARD 2T@1M - 3.0M (EXT WIDTH 360MM)- LR233030

NVH-150-T SERIES
With the Rear Blade, you can perform many tasks related to material handling; from levelling terrain to heavy board construction work.
Specifications:
- Swing Angle °: 18, 35 & 53 L/R ,3 forward and reverse
- Tilt Adjustment °: 7.5, 15, 22.5 and 30 U/D
- Offset Adjustment: 15cm/30cm L/R
- Mounts: Cat 1 - 3PL
- HP Range: 65(2WD) 60(4WD)
- Cutting Edge: ½inch x 6 inch reversible interchangeable
- Weight: 170 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BISON 1.5M NVH T SERIES GRADER BLADE, SUIT UP TO 55HP TRACTORS

Wheel Rake Tine.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GRANGE & WALTER WHEEL RAKE TINE (RH & LH) - 650MM LENGTH - REPLACEMENT FOR VICON

Rasspe Radura Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA RASSPE RADURA MOWER BLADE - 116 X 50 X 4MM (LH) - REPLACEMENT FOR CASE IH, NEW HOLLAND

Conical Head Bolt 2 Flats With Nut specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX CONICAL HEAD BOLT 2 FLATS WITH NUT - M12 X 45MM

This generator is perfect for housing installations, running compressors, welders and much much more. With an Automatic Voltage regulator (AVR) this generator is designed to maintain a consistent voltage level, causing it to be less likely to damage sensitive equipment.
It comes standard with 2 x 15 Amp outlets. Optional extras include wheel kits and centre point lifts.
Specifications:
Power Rating: 8kVA
Engine Model: Honda GX390
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.1L
Noise Level @ 7m: 74dBA
Outlets: 2 x 15 Amp
Approx. Fuel Consumption @ 80% Load: 2.58L/Hr
Operation Hours @ 80% Load: 2.36hrs
Fuel Type: Petrol
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 8 KVA AVR PETROL GENERATOR

4 high-performance solutions in one rugged and practical package, this workstation is your answer if you need a:
- Welder
- Generator
- Air Compressor
- 12/14 Volts of DC Power
Specifications:
Cont. Output Watts: 6000
Engine Model: Honda IGX390
Phase: 1-Phase
Starting System: Recoil/Electric
Noise Level @ 7m: 69 dBA
Outlets: 2 x 15 Amp plugs
Welder: 200 Amp (AC)
Duty Cycle: 60%
Compressor: 14 CFM
Air Tank Capacity: 50 L
Battery Charger: 10 Amp
Operation Hours @ 80% Load: 1.65 hrs
Fuel Type: Unleaded
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA WORKSTATION PETROL GENERATOR (ELECTRIC START)

Find Farm Machinery For Sale in Coopers Plains. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

GRANGE & WALTER TEDDER HAY TINE (RH) - 369MM LENGTH - REPLACEMENT FOR LELY

BURDER FEL QUICK CHANGE UPGRADE (SUIT JD 640 SPRING BRACKET)

BURDER 1.8M BURDER FRONT END LOADER (50-100 HP)

SILVAN 3/4" FLUSH-OUT LINE STRAINERS (30 MESH)

DIGGA 325MM AUGER (LIGHT- EARTH) FOR 3 POINT LINKAGE

DIGGA LOADING RAMPS ALUMINIUM STANDARD 2T@1M - 3.0M (EXT WIDTH 360MM)- LR233030

BISON 1.5M NVH T SERIES GRADER BLADE, SUIT UP TO 55HP TRACTORS

GRANGE & WALTER WHEEL RAKE TINE (RH & LH) - 650MM LENGTH - REPLACEMENT FOR VICON

RASSPE RADURA RASSPE RADURA MOWER BLADE - 116 X 50 X 4MM (LH) - REPLACEMENT FOR CASE IH, NEW HOLLAND

SPAREX CONICAL HEAD BOLT 2 FLATS WITH NUT - M12 X 45MM

GENTECH 8 KVA AVR PETROL GENERATOR

GENTECH 7 KVA WORKSTATION PETROL GENERATOR (ELECTRIC START)

Farm Supplies Machinery & Equipment

Dealer Address