Farm Supplies Machinery & Equipment

Shin specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SHIN - LH (LEMKEN)

Pear Linch Pin.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX PEAR LINCH PIN (11MM PIN DIA, 70MM TOTAL LENGTH)

NorthStar quick connect x 12.7mm male NPT.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

NORTHSTAR QUICK CONNECT X 12.7MM MNPT

Bale Frame specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX BALE FRAME - 2 X M28 X 1,250MM - C2 TINES

Milk Warmer Electric.
There is no doubt calves do better on warm milk.
Our 240v Milk Warmer uses a 2000W element encased in alloy for immersing in milk, or any liquid, to a maximum 70cm depth.
For deeper containers and plastic bottom containers, machine must be suspended or stood on a suitable stand. (Do not suspend warmer by the handles). Rheostat Controlled.
These milk warmers will heat 100ltrs of milk from 17°C to 37°C in approx 1 hour. Lift out and rinse off.
For warming large volumes (trailers etc) we suggest you use a standard electric plug timer, set for required time before feeding.
Milk will be warm when you are ready to go.
NB: Rubbing cooking oil into the element before using will help reduce milk deposits. If used for heating colostrum, you must thin milk with warm water, or stir frequently to prevent build up on element.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF MILK WARMER ELECTRIC

The nice thing about this specialty thermometer is that you do not have to withdraw it to read the temperature. It is easily visible on the top analogue dial display.
Length 41cm.
All stainless steel.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF COMPOST & SOIL THERMOMETER

Stabiliser Bar Assembly.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX STABILISER BAR ASSEMBLY - (ADJUSTABLE) 724MM MIN LENGTH, 889MM MAX LENGTH

This Halo Retrofit Kit suits Digga models PD4HF - PD10HF, PD12 - PD22, PDT8 Auger Drives made after 2007. They are suitable for excavators and skid steer loaders.
What is Halo?
Halo is an alignment system located in the hood ring of the auger drive, which provides an operator with a simultaneous clear line of sight to itself, as well as the hole being dug. Halo utilises a band of LED lights, which when fully illuminated green, indicate the drive is plumb.
The Retrofit Kit includes a new hood with halo ring, hood box, 3M cable & cigarette plug.
Options - Extension Cables:
EC-001292 - Halo 1m extension cable
EC-001293 - Halo 3m extension cable
EC-001294 - Halo 6m extension cable
Options - Battery:
EC-001301 - Halo battery kit. Includes battery with zero function, and 1m cable
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA HALO RETROFIT KIT (SUITS PD4HF - PD10HF, PD12 - PD22, PDT8)

Powered by the advanced four-stroke Honda GX390 engine, this generator is ready to deliver three phase power wherever and whenever you need it.
The Gentech 7kVA features a 6.5-litre fuel tank for a 2.5 hours continuous operating time, as well as the convenience of 3 phase 20 amp 5 pin outlets.
Boasting Hondas legendary fuel economy and reliability, its no wonder this is such a popular choice for farmers and builders who need more power for less. The package is complete with a 2 year generator warranty backed by a national service network. The Honda engine comes with a 3 year warranty.
Specifications:
Power Rating: 7 kVA
Cont. Output Watts: 6000
Engine Model: Honda GX390
Phase: 3-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.1 L
Noise Level @ 7m: 69 dBA
Outlets: 1 x 3 phase, 2 x 1 p
Approx. Fuel Consumption @ 80% Load: 2.44 L/Hr
Operation Hours @ 80% Load: 2.5 hrs
Fuel Type: Unleaded
Diam.: 735 x 545 x 545 mm (L x W x H)
Weight: 80 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA PETROL GENERATOR (415V ENGINE POWERED)

To Suit Telehandler. 

Heavy Duty Gravel Bucket. 9700 Series - 2.4M.

BURDER TELEHANDLER HEAVY DUTY GRAVEL BUCKET 2.4M (9700 SERIES)

7 kVA portable generator powered by Lister Petter diesel engine with electric start. Featuring 5 litre fuel tank, giving approx 2.94 hours of operation at 80% load.
Built for reliability, the Gentech range of diesel powered portable generating sets and welder generators deliver economy and durability unmatched by comparable petrol engines.
Perfect for small appliances (e.g. small air conditioners) and small hand held tools (e.g. 9 grinders , cut off saws).
Specifications:
Power Rating: 7kVA
Model Rating 0.8pf @ 50Hz: 7kVA
Engine Model: Lister Petter LPDR188
Engine Speed: 3000rpm
Phase: 1-Phase
Starting System: Electric
Fuel Tank Capacity: 5L
Outlets: 2 x 15 Amp
Operation Hours @ 80% Load: 2.94hrs
Fuel Type: Diesel
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 7 KVA DIESEL GENERATOR (ELECTRIC START - 240V)

350mm - 1 Series Auger for Post Hole Borer. Light conditions - Earth.
A1 soft earth
Bladed teeth for soft earth/clay.
Earth Auger for general purpose drilling.
Designed to reduce auger jam, the A1 auger features its cutters on one side as well as a restrictor plate to reduce overrun.
Available in earth or tungsten carbide (TC), providing longer wear life and greater cutting performance. Not suited for rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
Specifications:
- Drilling Conditions: Soft earth
- Hub: Stihl Style 25mm Round
- Overall Length: 960mm
- Flights (Lead): 6mm
- Flights (Carry): 6mm
- Teeth: TS
- Pilot: PS
- Ideal Drives: One man borer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 350MM AUGER (LIGHT- EARTH) FOR POST HOLE BORER

Find Farm Machinery For Sale in Coopers Plains. Browse 7661 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

SPAREX SHIN - LH (LEMKEN)

SPAREX PEAR LINCH PIN (11MM PIN DIA, 70MM TOTAL LENGTH)

NORTHSTAR QUICK CONNECT X 12.7MM MNPT

SPAREX BALE FRAME - 2 X M28 X 1,250MM - C2 TINES

SHOOF MILK WARMER ELECTRIC

SHOOF COMPOST & SOIL THERMOMETER

SPAREX STABILISER BAR ASSEMBLY - (ADJUSTABLE) 724MM MIN LENGTH, 889MM MAX LENGTH

DIGGA HALO RETROFIT KIT (SUITS PD4HF - PD10HF, PD12 - PD22, PDT8)

GENTECH 7 KVA PETROL GENERATOR (415V ENGINE POWERED)

BURDER TELEHANDLER HEAVY DUTY GRAVEL BUCKET 2.4M (9700 SERIES)

GENTECH 7 KVA DIESEL GENERATOR (ELECTRIC START - 240V)

DIGGA 350MM AUGER (LIGHT- EARTH) FOR POST HOLE BORER

Farm Supplies Machinery & Equipment

Dealer Address