Farm Supplies Machinery & Equipment

Do you need an easier way to dispense bulk bags?
Vogal Easy-Pour means you do not have to use the entire bulk bag when you open it. Simply place the bag on top of the Easy-Pour unit to pierce the bag. Then dispense the contents into your fertiliser spreader at your leisure, stopping at any time.
Made from stainless steel for durability in highly corrosive environments such as fertiliser.
Easy-Pour bulk bag dispensers simply spike into the bag for you to dispense on demand via the dispenser gate.
Easy-Pours are made from stainless steel apart from the 'tabs' that hold it in the bag. This gives it great corrosion resistant properties.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA BULK FERTILISER BAG DISPENSER (EASYPOUR)

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60-130 HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

Tungsten tooth (centre) wear part to suit XHD trencher range.
Auger Torque provide a range of wear parts to ensure your trencher is always performing at its optimum efficiency.
All Auger Torque hitches & frames are fabricated in house to the highest standards and with a number of standard hitches & frames on the shelf ready quick delivery.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

AUGER TORQUE TUNGSTEN TOOTH (CENTRE) WEAR PART TO SUIT XHD TRENCHER RANGE

Tapered bolt on tines manufactured to the highest quality standards, pierces easily into tight silage.
Straight Conus II with coned nut.
Cat 1 linkage with Cat 2 bushes.
Lift capacity of 1000kg evenly loaded.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS SILAGE FORK 1250MM LENGTH - 0292

Made in Australia. Suitable for many applications, from tree watering to fire-fighting and much more.
Features:
- Quality trusted pump Honda powered Blazemaster Pump
- 650 LPM @ head
- Versatile and lightweight
- Easily attach to any flat surface such as a ute tray provision for strap or pin mounting
- Wear pads allow airflow and protect ute tray
- Integrally mounted pump saves tray space
- Adjustable nozzle with 12m of hose as standard
Dimensions: 1,680 L x 750 W x 970H
Capacity: 400 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 400L FIRE FIGHTING UNIT (5.5HP PUMP)

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.
Features:
Fitted with positive quick release centre for angle selection, to minimise wear and tear.
Allows 24 different angle positions.
Blade can be reversed for back filling.
Can be offset in seconds to work outside the tractor wheel to the left or right hand side.
Choice of 5 positions each way to a maximum of 600mm offset.
Alternative holes for the lower linkage arms, provide ample tilt for V-draining.
Provides 30 degree tilt each way.
Heavy duty reversible cutting edges for maximum life.
Optional pneumatic wheelkit available for depth control.
Specifications:
Cutting Edge: 6ft
Mouldboard Thickness: 8mm
Mouldboard Height: 450mm
Tractor HP: 30-60
No of Offset Positions: 9
Weight: 260kg
Options:
0009 Grader Blade Wheel Kit
0419 Boxed ends suit Medium Duty model blades
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) WITH 4 RIPPERS - 0006,SUIT 30-60HP

67 L/min pump with Male - Female shaft. Additional Male-Male shaft model also available (CAPS071S).
All Silvan APS series high pressure diaphragm pumps are built for 540 RPM operation, are self-priming and feature a corrosion resistant cast anodised aluminium body.
Tough and reliable they will run dry without risk of damage.
All pumps are supplied with appropriate hose connections, mounting base plates and 1 3/8 six splined shaft.
Specifications:
Pump Size (L/min): 67
Height / Width / Length (mm): 289 / 343 / 238
Product Weight (kg): 18.4
Max Pressure : 5,000 (kPA)
Shaft: Male - Female
Diaphragms: 3
HP required at Max Pressure: 9.1
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN APS71 - HIGH PRESSURE DIAPHRAGM PUMP (67 LPM, MALE - FEMALE)

Murray Welding square small -117 x 117 x 50mm - 90 degrees - Series 72.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY WELDING SQUARE SMALL -117 X 117 X 50MM - 90 DEG - SERIES 72

Simple. Adjustable.
No more Sagging Gates.
Looking for an easy to install, adjustable bolt-on hinge set that wont let your gate sag?
Our bolt-on adjustable hinge for round posts, are strong, simple to install, safe for livestock, long-lasting, and will never sag! No welding, easily adjustable, and rust-resistant. This patent-protected design will have your gates swinging smoothly faster than you thought possible.
How Does The Adjustment Work?
The bottom gudgeon pin on this bolt-on round post gate kit allows you to adjust the gate angle easily, whenever its required.
With 140mm (5 ½) of vertical adjustment, there will be no more gates dragging on the ground, or sticking up in the air. Now you can get the swing just right every time!
Smooth Swinging Gates. Sorted.
The bottom gudgeon pin on this bolt-on round post gate kit allows you to adjust the gate angle easily, whenever its required.
No more gates dragging on the ground, or sticking up in the air. Now, you can get the swing just right.
The FG6 can be installed in minutes, with no welding or drilling. All you need is a shifter.
Because this is a bolt-on gate kit, it can be taken off, adjusted, turned around, etc at any time, easily.
Warning: No adjustment = Sagging gates.
Don't waste your time and money on non-adjustable bolt on hinges. Rotechs adjustable bottom gudgeon pin allows you to adjust the gate angle easily, whenever its required.
Price quoted is for one set.
* Latch not included

Discounts apply for bulk kit purchases of 10+, 25+, 50+ or 100+.
Features:
- Steel post
- Bolt on
- No power needed
- 19mm socket or spanner
- Adjustable all directions
- Galvanised
- Anti-bruise design
Specifications suit:
- 25NB gate
- 100NB post
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL BOLT-ON ADJUSTABLE ROUND POST HINGE SET 25NB X 100NB- FG6100

MS3 Module Stacker - 3 Tier.
The Blue Jenny Module stacker holds up to three Blue Jenny wire spinners internally to enable multiple wires to be run at the same time. Perfect for Weston Fencing!
The magazine style loading means you can load one spinner at a time regardless of how much wire remains in the other spinners.
Note that the photo shows the stacker loaded with Blue Jennies. Module price does not include wire spinners.
Please note that the 3-tier module stacker no longer includes lugs on top to carry a fourth spinner. This has been discontinued for safety reasons.
Shipping weight 24kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

WALTERS FENCING MS3 MODULE STACKER - 3 TIER

Linkage 400 litre Econopak sprayer with 58L/min pump, reel, hose & gun and 6m Econopak boom. Ideal for spraying pasture.
Specifications:
Tank Size (L): 400
Connection Type: Linkage
Pump Size (L/min): 58
Height / Width / Length (mm): 1310 / 2067 / 1105
Product Weight (kg): 121
Application: Pasture & Ag Lifestyle
Features:
Pump: Silvan self-priming oil-backed diaphragm type with nitrile diaphragms and cast anodised aluminium body. BP60/20: 58 L/min. capacity 2000kPa pressure.
Boom: Econopak boom: 6m with stainless steel spray lines, non-drip nozzle holders, fully galvanised frame and spring loaded safety break back/forward.
Nozzles: Air induction nozzles with strainer in bayonet fit non-drip nozzle holders at 50cm spacings.
Controls: 3 outlet manual control valve with pressure regulator. Mounted forward for easy access.
Tank: Polytuff impact resistant polyethylene construction, moulded litre calibrations and non-spill screw-down lid with single breather.
Frame: Fully galvanised steel, cat I & II linkage.
Agitation: Bypass agitation.
Pressure Gauge: 0-25 Bar dual stage glycerine filled gauge.
Filtration: Lid strainer, suction line strainer and nozzle strainers.
Hose Reel: Fitted with rear-mounted Eco hosereel, 30m of 10mm hose and Spotjet spraygun with adjustable spray nozzle.
PTO Driveshaft: Quality driveshaft with quick release pins & safety cover.
Options:
14L foam marker (single side)
16L foam marker (double side)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 400L (6M BOOM) ECONOPAK LINKAGE SPRAYER

The Twose SlopeTrak S300 from delivers outstanding performance and mowing efficiency.
Featuring a new and powerful Vanguard 28hp engine, low fuel consumption and low emissions, and a hybrid electric drive, this machine delivers smooth operation every time.
The Twose SlopeTrak S300 has low ground pressure creating minimal surface disturbance during operation.
The low centre of gravity and wide track widths offer maximum stability and optimum handling whilst working on slopes up to 55°.
Operation of the Slope Trak S300 is made effortless with the fully proportional remote control with a range of 150m and offering precise control and variable speed along with full control of the cutting deck functions including engaging and disengaging and height adjustment.
Some of the other great features include fast-stop rotors (cuts out in 3 seconds), fully enclosed body panels keep grass and debris out, GPS enabled offering the ultimate in mowing efficiency - maximum productivity, improved safety and more efficient working.
Specifications:
Cutting Width - 1,100mm
Cutting Height - 25mm-180mm
Rotors - 2
Weight - 480kg
Height - 765mm-915mm
Length - 1,510mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP SLOPETRAK S300 RADIO CONTROL MOWER

Find Farm Machinery For Sale in Coopers Plains. Browse 7615 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

RATA BULK FERTILISER BAG DISPENSER (EASYPOUR)

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 6MM DISCS - 0843, SUIT 60-130HP

AUGER TORQUE TUNGSTEN TOOTH (CENTRE) WEAR PART TO SUIT XHD TRENCHER RANGE

JOHN BERENDS SILAGE FORK 1250MM LENGTH - 0292

POLYMASTER 400L FIRE FIGHTING UNIT (5.5HP PUMP)

JOHN BERENDS MEDIUM DUTY GRADER BLADES 6FT (1.8M) WITH 4 RIPPERS - 0006,SUIT 30-60HP

SILVAN APS71 - HIGH PRESSURE DIAPHRAGM PUMP (67 LPM, MALE - FEMALE)

MURRAY WELDING SQUARE SMALL -117 X 117 X 50MM - 90 DEG - SERIES 72

ROTECH RURAL BOLT-ON ADJUSTABLE ROUND POST HINGE SET 25NB X 100NB- FG6100

WALTERS FENCING MS3 MODULE STACKER - 3 TIER

SILVAN 400L (6M BOOM) ECONOPAK LINKAGE SPRAYER

FIELDQUIP SLOPETRAK S300 RADIO CONTROL MOWER

Farm Supplies Machinery & Equipment

Dealer Address