Farm Supplies Machinery & Equipment

Spenco Stabiliser Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPENCO STABILISER PIN (16MM PIN DIA, 40MM WORKING LENGTH)

The VR12 reaches up to 10,000 BPH with only 130 HP and ensures that your toughest jobs are taken care of fast. It has 48-feet of 8-inch diameter hose. Combined with the telescoping inlet and the standing floor sweep, cleans up grain within a 52-foot radius from the base of the machine.
The Standard Hose Package Includes:
- 10 Diameter Telescoping Inlet, 5 long
- One Bin Load-Out Nozzle, 3 long
- One Standing Floor Sweep with Handles, 4 long
- One Clean-up Nozzle with Wheels
- One Stainless Steel Flex Hose, 3 long
- Four Flexible Stainless Steel Hose, 4 long each
- Two Aluminium Pipes, 7 ½ long each
- One Aluminium Pipe, 5 long
- One Basketweave Hose, 7 ½ long
- Three Hose Caddys
Specifically designed to minimize impact and maximize the auger feed - the drive shaft is mounted on the outside where you can get at it.
Our GrainVacs feature leak-proof cleanout doors with the ability to fully open without tools. Its all about speed and efficiency.
Chrome Augers AGI GrainVacs use ¼-thick, spring-loaded chrome flighting, allowing it to float on the bearings. This ensures correct line-up every time you fold the augers up and down.
The Air System Our air system is designed for speed, efficiency and longevity. At a sound volume quieter than the tractor, three critical components work together producing high-pressure suction to pull grain into the machine: 1) the fan, 2) the air throttle and 3) the air lock.
The Fan Lasts 25% longer than previous models. This means approximately 80 more hours of working time for the average user (based on extensive testing).
The Air Throttle Automatically manages suction according to how much grain is flowing into the system. This allows the user to adjust the amount of grain going through. Suction can be manually adjusted to suit the situation.
The Air Lock Spring-loaded, two flap air lock designed to be pushed as far as needed for the grain to exit the GrainVac fast.
GrainVacs come equipped with more standard hose than any other. When you need to reach beyond that distance, you need options that suit your set-up. To achieve best capacity at any distance, cover as much as you can with straight or smooth pieces like aluminium pipes and elbows, then add flexible portions like the stainless steel flex hoses and the Bendahose where needed.
These extra hose options (some pictures included) in addition to the standard hosing include...
Aluminium Pipe - is the best option for moving grain over any distance. Aluminium pipe provides the least resistance and allows your system to maintain optimum performance.
Flex Pipe - Stainless Steel Flex hoses provide some flexibility while keeping your capacity high.
Bendahose - is specifically designed to give you that extra little reach you always wanted along with flexibility.
Basketweaves - are your most durable clean-up hose, with a little more weight and less flexibility than the durathane options.
Durathane Hose - is the best option when maximum flexibility is required over short areas. Durathane offers the most flexibility but is the least durable.
Transitions / Adaptors - dont be limited by your hose diameter.
Available in 4, 6, 7 and 8 inch sizes.
Elbows - Steel elbows get you around corners without compromising your soft hoses, allowing material to flow as smoothly and quickly as possible. Use them with hoses to extend handling reach or to redirect the exhaust.
Sweeps - the floor sweeps clean up the bin floor in one magical swoop.
This nozzle allows you to get maximum efficiency when cleaning the bottom of a bin.
Ball Joins - add a ball joint wherever it makes sense and move around more freely with 40° of rotation.
Exhaust Hose Kit - If you are looking to blow your dust along the ground instead of up into the air, the exhaust hose kits are for you. You can direct the dust in between the bins. Keeping it low to the ground and away from you.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AGI VR12 GRAINVAC (PTO) REQUIRES 130HP

250MM RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 250MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

The Nobili TLP mulchers are suited to low horsepower tractors up to 30HP for grass with cutting height maintained by the rear roller.
Features:
Suggested Use: Grass mowing only.
Construction: Low profile body, no opening tailboard.
Drive Line: PTO drive shaft with durable safety cover, heavy duty oil bath gearbox with overrun clutch, taper locked pulleys and electronically balanced rotor.
Control: Fixed headstock.
Attachment: Cat. I and II three point linkage.
Height Control: Roller (standard fitment).
Specifications:
Connection Type: Linkage
HP: 25-60
Y Blades Standard
Working Width (mm): 1600
Weight (kg): 1205
Dimensions WxHxD (mm): 1750W 460H 760D
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

NOBILI TLP PASTURE MULCHERS 1.6M - TLP160/06, SUIT UP TO 30HP TRACTOR

Southern Cross 5ft Slasher - 30-45hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Optional Wheel Kit(s) - Twin Kit available
Features:
- Built for Australian conditions
- Australian Slasher Health and Safety Standards Compliant
- Dupont powder coating
- 3.5mm deck
- Height adjustable skids with five different cuttings heights
- 45HP Bare-Co gearbox
- 3 Year Gearbox Warranty
- Bare-Co 6 inch slip clutch
- Bare-Co Series 4 PTO shaft
- Front and rear discharge deflectors (chain)
- Centre mount and offset left and right
- High tensile drag chains mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on material flow
- Reinforced A-frame
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (one wheel kit is recommended for the 5ft slasher)
Specifications:
- Recommended Tractor (HP) - 30-45
- Cutting Width (mm) - 1470
- Overall Width (mm) - 1650
- Cutting Height (mm) - 30-116
- Number of Blades - 2
- Blade Size (mm) - 360X12.7mm(Bare-Co B6002)
- Blade Tip Speed (m/s max.) - 60
- Deck Thickness (mm) - 3.5
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/45HP
- PTO Driveline - Bare-CO Series 4 PTO Shaft
- Grass Discharge - Rear Discharge
- Slip Clutch - Bare-Co 6" Slip-clutch included
- Gross Weight - 323kgs
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

Top Link Locking Collar.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPENCO TOP LINK LOCKING COLLAR - M36 METRIC

Rasspe Radura Mower Blade specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RASSPE RADURA MOWER BLADE TWISTED - 100 X 47 X 4MM (LH) - REPLACEMENT FOR POTTINGER

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 r.p.m.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

HD Log and Trash Grab Profile Cut tine. Single Grab.
Specifications:
- Weight: 250kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER TELEHANDLER HD LOG/TRASH SINGLE GRAB

150MM RC4 Series Auger (Earth/Rock combo - Tapered Teeth) up to 5T for Ramdrill PHD- Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
RC4 earth/rock
Digga's RC4 Augers come with tapered tungsten TAPERLOC teeth, which are designed for drilling in earth, shale, asphalt, permafrost and fracturable rock.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Combo Earth & Rock
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TT
- Pilot: PM-HX-3
- Ideal Drives: PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 150MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

The direct drive auger motor is fast and has about 400NM of torque. Operates with its own ram, allowing optimal down pressure and lift. (Not able to extract old posts). 

This auger motor can also be mounted to the RSE by using the RSE adaptor. Great operation to consider if you are battling in hard or dense clays. Able to drill up to 1200mm deep (can drill deeper on request).


All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FENCE-PRO STANDARD AUGER MOTOR - 200MM / 8 INCH AUGER (EARTH OR TUGSTEN PILOT)

Series 20 Pasture Harrow System - Medium/Heavy duty.
Complete medium/heavy duty harrow systems available from 2.59m (8ft) to 5.18m (17ft) configurations, drag or lift type.
Extreme high quality Australian product, built for our harsh conditions!
For larger field operations over 100 acres (40 hectares), where greater strength and durability are needed in a pasture harrow, the Murray Series 20 Pasture Harrow System performs above the rest. The system consists of a front drawbar, 3, 4 or 5-rank Pasture Harrow sections and heavy steel square chain mesh together with the appropriate weights. The flexibility and strength of the Murray Pasture Harrow sections easily accommodates uneven ground and stony areas of roughly cleared country which would present difficulties for rigid tines harrows. Each harrow section has a 4-point pull which ensures true tracking and proper operation of the tine section.
The heavy duty square chain mesh breaks down and distributes animal manures and other organic matter evenly across the whole pasture. This promotes a quick response to seasonal breaks and optimum pasture growth.
The Murray Series 20 Pasture Harrow is available in four working widths between 2.6 metres (8ft6in) and 5.1m (17ft). Each set is supplied complete with front drawbar, harrow sections and chain mesh sections including weights.
100% Australian made and owned.
Features:
- High Carbon Steel Tines and Square Chain Mesh
- Coverage 0.86m (2ft10in)
- Tine Spacing 44mm (1 3/4in)
- Tine Length 197mm (7 3/4in) approx
- Centre to Centre of Front Hooks 222mm (8 3/4in)
- 3 Ranks 12 Tines or 4 Ranks 16 Tines or 5 Ranks 20 Tines
- Available in 2 chain mesh depths 0.76m (2ft6in) and 1.5m (5ft)
3 Rank sections and Standard 0.76m (2ft6in) Deep Mesh Chain Drag Type:
20001 3 sections, 2.59m (8ft6in) 152kg
20002 4 sections, 3.45m (11ft4in) 230kg
20003 5 sections, 4.31m (14ft2in) 285kg
20004 6 sections, 5.18m (17ft) 345kg
3 Rank sections and Standard 0.76M (2ft6in) Deep Mesh Chain Lift Type:
20240 3 sections, 2.59m (8ft6in) 200kg
20241 4 sections, 3.45m (11ft4in) 280kg
20242* 5 sections, 4.31m (14ft2in) 348kg
* Lift sets Model Numbers 20242 & 20246 also include a Rear Lift / Hoist extension bar.

3 Rank Sections And Super 1.5m (5ft) Deep Mesh Chain Drag Type:
20005 3 Sections, 2.59m (8ft6in) 197kg
20006 4 sections, 3.45m (11ft4in) 297kg
20007 5 sections, 4.31m (14ft2in) 365kg
20008 6 sections, 5.18m (17ft) 435kg
3 Rank sections and Super 1.5m (5ft) Deep Mesh Chain Lift Type:
20244 3 sections 2.59m (8ft6in) 249kg
20245 4 sections 3.45m (11ft4in) 352kg
20246* 5 sections 4.31m (14ft2in) 434kg
* Lift sets Model Numbers 20242 & 20246 also include a Rear Lift / Hoist extension bar.

4 Rank sections and Standard 0.76m (2ft6in) Deep Mesh Chain Drag Type:
20009 3 sections 2.59m (8ft6in) 180kg
20010 4 sections 3.45m (11ft4in) 268kg
20011 5 sections 4.31m (14ft2in) 323kg
20012 6 sections 5.18m (17ft) 390kg
4 Rank sections and Super 1.5m (5ft) Deep Mesh Chain Drag Type:
20013 3 sections 2.59m (8ft6in) 225kg
20014 4 sections 3.45m (11ft4in) 335kg
20015 5 sections 4.31m (14ft2in) 403kg
20016 6 sections 5.18m (17ft) 479kg
5 Rank sections and Standard 0.76m (2ft6in) Deep Mesh Chain Drag Type:
20017 3 sections 2.59m (8ft6in) 213kg
20018 4 sections 3.45m (11ft4in) 308kg
20019 5 sections 4.31m (14ft2in) 375kg
20020 6 sections 5.18m (17ft) 456kg
5 Rank sections and Super 1.5m (5ft) Deep Mesh Chain Drag Type:
20021 3 sections 2.59m (8ft6in) 258kg
20022 4 sections 3.45m (11ft4in) 375kg
20023 5 sections 4.31m (14ft2in) 455kg
20024 6 sections 5.18m (17ft) 541kg
Complete Set Comprises Front Drag Drawbar, Tine sections (3, 4 or 5 Rank deep), Mesh Chain section (2ft 6in or 5ft deep) (and Series 21 3-Point Linkage Hoist Frame, Front Lift Drawbar [in lieu of Front Drag Drawbar] and Rear Lift connectors if Hoist Lift type specified.
Lift sets Model Numbers 20242 & 20246 also feature a Model Number 5071 Rear Lift / Hoist extension bar).
Individual panels, chains and parts also available for sale.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 20 PASTURE MEDIUM HARROW SYSTEMS- MEDIUM/HEAVY DUTY - (2.59M - 5.18M) WIDTH

Find Farm Machinery For Sale in Coopers Plains. Browse 7660 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

SPENCO STABILISER PIN (16MM PIN DIA, 40MM WORKING LENGTH)

AGI VR12 GRAINVAC (PTO) REQUIRES 130HP

DIGGA 250MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

NOBILI TLP PASTURE MULCHERS 1.6M - TLP160/06, SUIT UP TO 30HP TRACTOR

SOUTHERN CROSS AG MACHINERY 5FT SLASHER, SUIT 30-45HP

SPENCO TOP LINK LOCKING COLLAR - M36 METRIC

RASSPE RADURA MOWER BLADE TWISTED - 100 X 47 X 4MM (LH) - REPLACEMENT FOR POTTINGER

MUTHING MU-O 200 MULCHER FRONT OR REAR MOUNTING

BURDER TELEHANDLER HD LOG/TRASH SINGLE GRAB

DIGGA 150MM AUGER (EARTH/ROCK COMBO) FOR RAMDRILL - HYDRAULIC DRIVE

FENCE-PRO STANDARD AUGER MOTOR - 200MM / 8 INCH AUGER (EARTH OR TUGSTEN PILOT)

MURRAY SERIES 20 PASTURE MEDIUM HARROW SYSTEMS- MEDIUM/HEAVY DUTY - (2.59M - 5.18M) WIDTH

Farm Supplies Machinery & Equipment

Dealer Address