Farm Supplies Machinery & Equipment

Australia's favourite refuelling tank is available in a wide range of sizes and pump options to suit your job. Built in handles and tie down points are just some of the useful features of these units.
Manufactured with special diesel grade polyethylene material that complies with International Regulation ECE R34.01.
Complies with the relevant sections of AS1940-2004 and AS2809.2-2008
Anti Dust Filter System:
Dust getting into diesel refuelling tanks through air breather points is a leading cause of contamination in vehicle fuel systems. The Genius diesel unit eliminates this with a clean breathe filter installed in the anti-splash breather system.
Our famous Genius diesel units are the most popular ute-mount refuelling systems, featuring 2-point locking system for protection against theft.
Features:
- Australian made diesel tank manufactured with diesel-grade poly 15 year tank warranty
- Weatherproof pad-lockable pump cover keeps your pump kit protected & your fuel safe
- Unique compact design with in-built carry handles for 'carry-anywhere' convenience
- Diesel lid with breather, 2 inch filler & cap
- Clean fuel every time with the unique dual strainer filtration system
- Dieselflo 12 volt 40L/min pump kit mounted under lid
- Auto shut off nozzle mounted under the cover and is pad-lockable
- 4 metres of 20mm delivery hose
- 4 metres battery cables
- Earth straps
Specifications:
- Weight kg: 30
- Dimensions: 800Lx680Wx465H
Available Options:
- 45lpm pump
All prices include GST. Please allow extra for freight.
Delivery available Australia wide!
Contact Farm Supplies today for sales enquires or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RAPID SPRAY 100L GENIUS DIESEL UNIT WITH 40L/MIN PUMP KIT

Your solution to Move Better.
An exclusive mechanical override braking system allowing high allowable payloads, combined with a heavy-duty design & construction.
Available in both an Aluminium or Galvanized Steel framed option:
Specifications:
Aggregate Trailer Mass: 2,700kg
Allowable Payload: 2,200kg
Tare Weight: 480kg
Deck Width: 1,400mm
Deck Length: 1,950mm
Bucket Rest Length: 1,150mm
Total Trailer Length: 4,360mm
Features:
Australian Approved Mechanical Override Braking System
Custom Colour Powdercoated Guards
Lightweight Aluminium Ramps
New 13 Steel Wheels & Tyres
Sealed for Life Bearings
Lockable Head for Anti-Theft
Auto Reverse Braking System
Multi-Volt L.E.D Lighting
6x Tie Down Points
Heavy Duty Swivel Jockey Wheel
Rubber Torsion Bar Suspension
HDPE Plastic Bucket & Blade Rest (SW2600 only)
Options:
JCH2435 - Lockable Jerry Can Holder
LRK2435 - Load Restraint Kit
TC70 - Tow Coupling 70mm (non-standard)
TB70 - Tow Ball 70mm (non-standard)
WTU14 - Upgrade to 14" Alloy Wheels
WTU16 - Upgrade to 16" Alloy Wheels
WTS13 - Wheel & Tyre, Spare, 13" Steel (Supply only)
WTS14 - Wheel & Tyre, Spare, 14" Steel (Supply only)
WTS15 - Wheel & Tyre, Spare, 15" Steel (Supply only)
WTS16 - Wheel & Tyre, Spare, 16" Steel (Supply only)
WTA14 - Wheel & Tyre, Spare, 14" Alloy (Supply only)
WTA16 - Wheel & Tyre, Spare, 16" Alloy (Supply only)
WM1416 - Spare Wheel Mount
AM2435 - Auger Stands
RPU2435 - Roller Package Upgrade
Alternate Models:
Aluminium Option - SW2600 - 2,600kg Aggregate Trailer Mass, 2,200kg Allowable Payload, 400kg Tare Weight, 1,400mm Deck Width, 1,900mm Deck Length, 1,140mm Bucket Rest Length, 4,700mm Total Trailer Length.
This option with a lightweight aluminium frame, and exclusive componentry, the SW2600 is everything a machine operator requires in a Trailer.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2,200KG PAYLOAD TRAILER WITH 2,700KG A.T.M AND 480KG TARE

A light duty dual mount slasher for grass and light work. Ideal for compact tractors. Available in 3ft 4in (1.0m) and 3ft 10in (1.2m) sizes.
Features:
Body designed with 3mm top plate and strong 6mm thick adjustable skids.
Italian made Bondioli & Pavesi Series 2 pto driveshaft with shearbolt protection rated
at 900NM. Optional 2 plate slip clutch with Series 4 shaft. (The clutch is standard on
the TA135 and TA150 models)
Cat 1 linkage with both offset and centre mount positions.
Hardened and tempered stepped/bushed slasher blades.
Standard with full length hinging rear steel stone flap and front rubber guard.
Adjustable skids have cutting height range of 25 100mm.
40 HP oil lubricated gearbox.
Floating headstock.
Document holder fitted.
Full 12 month warranty on design and manufacture.
Models:
0350 TA100
Cutting Width 1030mm
Overall Width 1120mm
Overall Length 1120mm
Tractor HP 18-30
Cutting Height 25-100mm
Weight 180kg
0351 TA120
Cutting Width 1170mm
Overall Width 1270mm
Overall Length 1270mm
Tractor HP 20-35
Cutting Height 25-100mm
Weight 195kg
0349 TA135
Cutting Width 1360mm
Overall Width 1460mm
Overall Length 1470mm
Tractor HP 25-45
Cutting Height 25-100mm
Weight 225kg
0364 TA150
Cutting Width 1460mm
Overall Width 1560mm
Overall Length 1580mm
Tractor HP 25-50
Cutting Height 25-100mm
Weight 245kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 1M LIGHT DUTY SLASHER - 0350 - SUIT UP TO 40HP

1.5m Euro Hitch Mid Range Power Claw.
Made in New Zealand.
Application: Tractors 45hp-75hp and small loaders
This attachment can be fitted to almost any loader or material handler from 45-75 hp. It must be the most useful tool you can think of because of due to the number of applications & tasks it can be used for including rocks, logs, tree removal, hay bales, root rake, pruning's, rubbish and much more.
The exceptional clamping force and 12mm super high strength AR450 abrasion resistant steel tines make this grapple a true multi tasker. Interlocking tines ensure excellent grip & clamping force.
Mid Range Power Claw tines are made from 12mm AR450 abrasion resistant high tensile steel for maximum strength and durability. The tines are also braced to ensure maximum rigidity and prevent any possible splaying.
Interlocking tines of the Claw ensure excellent grip on any product or item that's being handled. This makes handling the likes of hedge trimmings and branches much easier as the product is fully secured.
Rata Claws feature powerful hydraulic rams and high quality hosing, the rams are located to the rear of the grapple away from the working area and the hoses are located out of harms way to ensure full protection.
The Claw features heavy duty pins & bushes throughout the build. All pins are high tensile and greasable with the main pivots being 35mm diameter and supported by extra bushes.
Power Claw (Mid Range) Features:
- Based on the larger Power Claw designed for 80hp plus tractors, but scaled to suit tractors in the 45hp to 75hp range
- Made with industry leading AR450 grade steel tines!
- Ideal multi-purpose tool for the lifestyle block or small farm
- Opening dimension of 1200mm
- Supplied with Free storage stand
- NOT for Tractors over 75hp
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

RATA 1.5M POWER CLAW MID RANGE (45-75HP) EURO HITCH

Series 30 2.84m Mounted Spring Tine Harrow System - Light Duty 2 Rank- Straight Tines.
The Series 30 Light Duty is the perfect implement for sandy to light soils. Specifically designed to increase trash flow using wide spacing between each straight tine, the 2 rank is a lighter duty harrow available in five sizes ranging from 1.78m (510) to 3.20m (106). Each section is supplied complete with two mount arms.
Harrow depth control is adjustable by means of specially designed cam-action fitting within the mount arm.
Specifications:
- Coverage: 2.84m
- Weight: 76kg
- Tine spacing 85mm (3 3/8) 2 Rank.
- Tine Diameter 10mm Straight Tine.
- Tine length 385mm (15) approx.
- Rank Spacing 324mm (12 3/4").
- 2 Mount Arms per unit.
- Mount clamp suits 81mm to 100mm (3 1/4 to 4) square frame positioned on the flat or on the edge (Spacers
required for 75mm [3] square frame).
Features:
- May be attached to the rear bar of light duty cultivators, seeding drills, etc.
- Unit features two Series 30 Mount Arms.
- A cam incorporated in the mount clamp adjusts the height of the Harrow Tine Section.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 2.84M MOUNTED SPRING TINE HARROW SYSTEM - LIGHT DUTY - 2 RANK

The ultimate machine for breaking open compaction without destroying the soil structure.
The specially curved and twisted European Bellota tines are designed to loosen the soil more than the conventional straight shank tines by gently vibrating the hard pan from the bottom up. This produces more lateral fracturing between the tines without bringing the sub soil to the surface or burying residue.
All tine components are made from boron steel which provides great flexibility and long wear life. The special heat treatment process offers a surface hardness on HRc50. The components are then shot-peened and painted. Capable of digging down to 18" depth, depending on soil conditions.
Various tine configurations available. Standard in 4 and 6 tine models. Requires approximately 20-35HP per tine, depending on soil conditions.
Features:
- 15mm time shank provides 900mm under frame clearance.
- Reversible point is 40mm thick and angled for easy soil penetration.
- Replaceable 8mm shin guard prevents wear to tine.
- High tensile 20mm shear bolts.
- Cat 2 linkage with extremely strong 150 x 150 x 10mm main frame.
- Clamp brackets made from 32mm plate.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS GROUND BREAKERS 2 TINES, SUIT 50 HP+

The Wheel Riser series ramps are the latest addition to the Climaxx Aluminium Ramp range. As with all the Climaxx ramps, they are made from Aluminium, ensuring ease of positioning and transport. These service ramps are built for raising Heavy Vehicles off the ground for a variety of uses.
The Wheel Riser series ramps are specifically designed for applications where access to the underside of heavy vehicles is either difficult or restricted. The Climaxx Wheel Riser Ramps are suited but not limited to the following applications:
- Service Centres
- Loading Docks
- Heavy Vehicle Wash Bays
- Heavy Vehicle Inspection Areas
The Wheel Riser ramps are built to comply with the Australian Standard AS. 2640:2016. Released in 2016, this standard outlines stringent requirements in which portable ramps are to be designed and manufactured in accordance with. This standard was released as a result of sub-standard products being used which resulted in fatal injuries.
With over 40 years of experience manufacturing Loading Ramp solutions, we have designed a safe and compliant service ramp product to meet the industry requirements.
Specifications: A, B, C & D shown in picture diagram.
Rated Capacity per Axle: 7,500kg
Ramp Length (A): 1.42m
Raised Bed Length (B): 770mm
Height of Raised Bed (C): 250mm
Height of Raised Bed Including Ramp (D): 302mm
Ramp Tread Width: 600mm
Overall Ramp Width: 700mm
Models:
WR7522-40 - 7,500kg Rated Capacity, 1.42m Ramp Length, 770mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 400mm Ramp Tread Width, 500mm Overall Ramp Width.
WR7522-60 - 7,500kg Rated Capacity, 1.42m Ramp Length, 770mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 600mm Ramp Tread Width, 700mm Overall Ramp Width.
WR7536-60 - 7,500kg Rated Capacity, 1.42m Ramp Length, 2,170mm Raised Bed Length, 250mm Height of Raised Bed, 302mm Height of Raised Bed Including Ramp, 600mm Ramp Tread Width, 700mm Overall Ramp Width.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 7.5 TONNE WHEEL RISER RAMP WITH 77CM BED, 1.42M RAMP (70CM RAMP WIDTH)

Trailed over row TGS 3 row 2000 litre sprayer with 182 L/min pump, electric valve controls and 500mm twin turbine fan. Ideal for vineyards and berries.
Specifications:
Market: Horticulture. Viticulture.
Tank Size (L): 2,000
Connection Type: Trailed
Min PTO hp: 75
Pump Size (L/min): 182
Height / Width / Length (mm): 3300 / 1800 (less head), 2490 (folded) / 4680
Product Weight (kg): 980 (dry)
Application: Vineyards, berries
Features:
Head: Multi row spraying head with air assist diffusers and twin spray nozzles. Each air diffuser features swivel adjustment and air deflector. Poly air tubes shaped to surround canopy. Both arms have independent hydraulic fold with manual width & height adjustment (2 tractor remote sets required).
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifolds. IDS2001: 182L/min. capacity 5000kPa pressure.
Fan Size: 500mm twin impeller turbine fan, power consumed 48 kw (64HP).
Nozzles: Twin hollow cone ceramic nozzles per outlet with individual on/off non-drip taps.
Gearbox: 2-speed with neutral position, oil-bath type
Controls: 40 Bar electric section valves, master valve, electric pressure regulator and in cab controls
Frame: Galvanised steel chassis, adjustable drawbar with jockey wheel.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
Chem Induction: Suction probe with detachable hose.
Agitation: Pump bypass plus venturi agitator.
Pressure Gauge: 0-60 bar glycerine filled gauge fitted to pump.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem simplicity suspension with 10 x 15" wheels & tyres. (2000L & 3000L) or 11.5 x 15.3" wheels & tyres (3500L & 4000L)
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 75 PTO HP
Options:
- IDS2600 pump, 249L/min capacity, 5000kPa pressure (D99-149)
- Bravo 180S automatic rate controller (D99-143)
- Vertical lift head assembly (1 extra set of tractor remotes required) (TGS-LIFT)
- Quick turning hitch (D99-170)
- Hydraulic row width adjustment (1 extra set of tractor remotes required) (D99-186)
- Road kit (D99-151)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L (3 ROW) TGS TRAILED SPRAYER - MIN 75PTO HP

Ever wanted to swap your chemical out to a different chemical in the middle of spraying? Now you can with the all new RapidMix clean tank technology.
With separate chemical and main water tanks, the RapidMix Sprayer mixes the chemical as they exit the spray gun meaning no more messy and wasteful pre-mixing of chemicals.
With additional chemical tanks (refer to spare tank listed below) available for purchase, you can now have multiple chemicals set up, ready to go for when you next need to spray without needing to clean your RapidMix every time you want to change chemicals.
Specifications:
- 95L main UV-stabilised translucent tank for easy viewing
- 12V 8.3L/min 60psi pump
- 7 mixing rate settings for chemical dilution from 7 117ml/L
- Flow control valve
- Quick change between boom or spot spray
- 12cm wide opening mess free mixing and filling
- Removable filter basket
- Pressure gauge and regulator
- Basket filter to stop debris
- Drainage cap quick empty
- 4.5m reinforced hose
- Poly spray lance with cushioned grip trigger
Spare Tank:
PTCM0007L - Spare Rapidmix 7.6L Concentrate Tank (for 95L Sprayer)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID SPRAY 95L RAPIDMIX SPRAYER

Used to aerate the soil to reduce compaction and allows water and fertiliser to penetrate the surface. Suitable for pastures, ovals, playing fields etc.
Farm Aid Aerators are entirely Australian products Designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction, they are built to serve and built to last!
Specifications:
Heavy duty 100 x 50 x 6mm RHS main frame
3 Point Linkage
Self aligning pillow flange bearings
1 1/4in axles
14in (355mm) diameter heavy tubular roller
5 rows of 150mm slicing tines spaced 12 apart
Can be filled with water for extra weight
Other sizes and configurations can be made to order.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID 5FT AERATORS (1500MM) - FA1001

Post driver - 1200mm.
Post drivers are heavy metal cylinders, closed at one end with handles on either side.
They are used to manually drive steel fence posts into the ground.
Used by farmers, hobby farmers, handymen and fencing contractors.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

LEMPRET WIRE & SEALANTS POST DRIVER 1200MM

The RM80 offset disc cultivating plough is designed for extremely tough conditions. It is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 24inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2510kg
No of bearings: 16
No of axles: 8
Cutting width: 3.66m (12ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 5MM SCALLOP DISCS - 0853, SUIT 75-165HP

Find Farm Machinery For Sale in Coopers Plains. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

RAPID SPRAY 100L GENIUS DIESEL UNIT WITH 40L/MIN PUMP KIT

SUREWELD 2,200KG PAYLOAD TRAILER WITH 2,700KG A.T.M AND 480KG TARE

JOHN BERENDS 1M LIGHT DUTY SLASHER - 0350 - SUIT UP TO 40HP

RATA 1.5M POWER CLAW MID RANGE (45-75HP) EURO HITCH

MURRAY 2.84M MOUNTED SPRING TINE HARROW SYSTEM - LIGHT DUTY - 2 RANK

JOHN BERENDS GROUND BREAKERS 2 TINES, SUIT 50 HP+

SUREWELD 7.5 TONNE WHEEL RISER RAMP WITH 77CM BED, 1.42M RAMP (70CM RAMP WIDTH)

SILVAN 2,000L (3 ROW) TGS TRAILED SPRAYER - MIN 75PTO HP

RAPID SPRAY 95L RAPIDMIX SPRAYER

FARM-AID 5FT AERATORS (1500MM) - FA1001

LEMPRET WIRE & SEALANTS POST DRIVER 1200MM

JOHN BERENDS RM80 HD TRAILING OFFSET 32 PLATE 24 INCH 5MM SCALLOP DISCS - 0853, SUIT 75-165HP

Farm Supplies Machinery & Equipment

Dealer Address