Farm Supplies Machinery & Equipment

Professional compact tractors. Tractors up to 75hp require efficient, versatile and robust flail mulchers to carry out mowing and mulching work reliably, quickly and economically.
At the same time the equipment should be light so as not to restrict the scope of the system vehicles.
The MU-E mulcher series was created for this range of tractors. A range of options, additional equipment, low weight and strong construction are the typical attributes of this versatile range of mulchers.
Features:
Manufactured from High Quality QSt/E Steel
Headstock Cat. I + II for Rear mounting
Mountable in two positions variable by 30cm (Offset)
Gearbox with integrated over run clutch and through drive 540 RPM. or 1000 RPM
Belt protection with tension measuring slot
Stand
High tempered M Hammer flails
Smooth running Spiral rotor with specially formed lugs
Patented removable shredding bar System: Shark Fin
Roller to carry the flail, adjustable for different heights
High tempered spring steel one way protection flaps in front of the mower
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut
P.T.O. shaft and Guarding to ISO Standards
Independently tested and certified for Thrown Objects.
Options:
Modification 540 to 1000 RPM (+ labour charge)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING ECOTOP 180 MULCHER (OFFSET 30CM) SUITS 30-75HP

By using the MU-H/S rear and side mounted mulcher you can turn your tractor into a universal mower for verges, embankments and ditches with working widths of up to 4.00 m.
To do this you only need 2 double acting hydraulic valves on your tractor, one of which should have a floating position.
The patented safety breakaway system of the MU-H/S via a mechanical arm is the active collision protection for both tractor and mulcher.
This allows the mulcher to permanently reduce its load upwards, thus reducing the forces bearing on the lower link and the device.
Features:
Manufactured from High Quality QSt/E Steel with Headstock Cat. II for Rear mounting.
Hydraulic parallelogram side shift.
Patented Safety Mechanical Break Away System.
Working angle 90° up to 60° down.
Gearbox with integrated over run clutch for 540 r.p.m.
Belt protection with tension measuring slot.
Hydraulic transport safety lock at an angle of 90° with shut-off tap, (2 double acting spool valves required, at least one with floating position).
Stand.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Roller with internal bearings and well-rounded edges to preserve the soil and turf and to carry the flail, adjustable to different heights.
Wearing skids.
High tempered one way spring steel protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut.
Purposely designed hood in conjunction with high rotor and cutting speeds and patented removable shredding bar System: Shark Fin spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
P.T.O. shaft and Guarding to ISO Standards.
Carbide Wearing Skids (removable).
Adjustable Vario cutting bar for adjusting the shredding rate.
Options:
Electro-Hydraulic 6/2 distributer with handle and feeler (1 double acting spool valve with floating position required).
Rotor with triple Y-blades (additional charge).
Rotor with M shackle flails (additional charge) (please state exact working width).
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Model:
MU-H/S 140 1400mm 90 HP WW 1400mm Weight 640kg Flails 12
MU-H/S 160 1600mm 90 HP WW 1600mm Weight 670kg Flails 14
MU-H/S 180 1800mm 90 HP WW 1800mm Weight 705kg Flails 16
MU-H/S 200 2000mm 90 HP WW 2000mm Weight 735kg Flails 16
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

1,500kg lifting capacity Jib. Includes swivel hook.
Specifications:
- 300mm from face of jib frame
- L x W x H: 500mm x 1275mm x 540mm
- Weight: 190kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER 1,500KG LIFT CAPACITY JIB (INCL SWIVEL HOOK)

Hydraulic Top Link (Cat.2/2) Ball and Q.R CBM Hook
Cylinder Bore: 80mm
Min. Length : 595mm.
Specifications included in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC TOP LINK (CAT 2/2) (80MM CYLINDER BORE) (595MM MIN LENGTH)

375MM DR4 Series Auger (Dedicated rock - Rotating Picks) up to 5T for Ramdrill PHD - Hydraulic drive.
Price inclusions: Auger, teeth, pilot, pin and clip.
DR4 dedicated rock
DR augers feature rotating rock picks for drilling from soft fracturable rock to very hard rock. Featuring short flighting, the design encourages regular spoil removal, allowing cool air to enter the hole, and facilitate regular tooth inspection. Watch our rock auger overview video.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: Dedicated rock
- Standard Hub: 65mm Round
- Hub Options: 75mm square
- Overall Length: 1200 mm
- Flights (Lead): 12 mm
- Flights (Carry): 8 mm
- Teeth: 19 mm Rotating Rock Pick
- Pilot: DRP-19-15
Optimum Drilling Speeds - RPM:
- Earth: not recommended
- Clay: not recommended
- Shale (Fracturable Rock): 25-45
- Heavy Rock: 10-25
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 375MM AUGER (DEDICATED ROCK) FOR RAMDRILL - HYDRAULIC DRIVE

Aluminium Loading Ramps Standard (external width 510mm) - 3.5m long - Suitable for rubber tyres and rubber tracks only.
Capacity @ wheelbase: 4.0 tonne @ 1.5m
Price inclusions: set of ramps, 2 pins and clips.
A light weight aluminium loading ramp with enhanced safety that delivers on quality, performance, and is cost effective. European designed and engineered, the Digga loading ramps feature the most advanced design in the Australian market today.
Digga's aluminium loading ramps include a standard range (1t to 6.2t) and a Universal range (5.2t to 9t). The ramps are used to load excavators, skid steer loaders and mini loaders on trailers, tipper trucks and flat beds.
Features & Benefits:
- Patented extruded double T-rail with interlocking rungs
- 3 different connection methods
> Pin (supplied)
> Tongue (supplied)
> Chain (chain not supplied)
- Enhanced beam strength
- 18 Month Warranty
- CE and TUV certification
- New stronger rung design
- Reinforced bottom and top rungs
- Length of reinforcement differs on every ramp model
- Low to the ground bottom rung
- Superior strength & durability
Standard Loading Ramp Range:
- Suitable for rubber tyres and rubber track machines
- Rung design prevents clogging up with mud, stones, and other debris reducing the risk of tyre/track slippage
- New rung design cleans the wheels/tracks as machines climb the ramp, minimising debris taken onto the truck
- New rung design allows operators to safely walk up the ramp
- Smoothest ride of any ramp on the market.
Specifications:
- Capacity @ wheelbase: 4.0tonne @ 1.5m
- Beam Height: 140mm
- Int width: 450mm
- Ext width: 510mm
- Length: 3.5m
- Weight (per ramp): 45kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

DIGGA LOADING RAMPS ALUMINIUM STANDARD 4.0T@1.5M - 3.5 (EXT WIDTH 510MM)M - LR403545

Driving Belts ensure reliable power transmission because of their smooth running properties even under harsh operating conditions (resulting from dirt, dust, and moisture). Driving Belts work efficiently even under extreme weather conditions such as heat, cold, drought, rain, and direct sunlight.
Muthing Driving Belts suit the following Models:
MU980827 Drive Belt XPB 1320 MU-H + ECOTOP
MU980804 Drive Belt XPB 1500 MU-H/FS + MU-H/S + MU-L/S + MU-M/S
MU980824 Drive Belt XPB 1600 MU-M
MU981838 Drive Belt XPB 1725 MU-PRO
MU980859 Drive Belt XPB 1900 MU-FARMER/S
MU981818 Drive Belt XPB 2000 MU-FARMER 280-330 Rear
MU981819 Drive Belt XPB 2120 MU-FARMER 280 Front
MU00005573 Drive Belt B46 MU-C + MU-FM/S
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING DRIVING BELT (ONLY)

100mm - 3 Series Auger up to 5T for 3 point linkage. Standard conditions - Tungsten Carbide.
Price inclusions: Auger drive with 50.8mm round hub, teeth, pilot, pin and clip.
The A3 is constructed for efficient post hole digging.
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions.
Constructed for fast efficient post hole digging, even in extreme conditions. Available in earth or multi-facet tungsten (MFT) braised onto the face of the teeth, providing longer wear life and greater cutting performance. Not suited to harder fracturable rock.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General
- Standard Hub: 50.8mm Round
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 100MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

7mm Calving Rope Single Eye - Pair.
These ropes are most useful for all normal uncomplicated calving assistance.
Length 1.1m.
Sold as a pair.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF CALVING ROPE 7MM SINGLE EYE - PAIR

225MM 4 Series auger up to 5T for Ramdrill PHD -Hydraulic Driver.
Price inclusions: Auger, teeth, pilot, pin and clip.
A4 earth
Drill holes in light earth conditions and clay. Numerous teeth options are available for most ground conditions. Available in Earth, Tungsten, or MFT for general drilling. Easy PADLOC knock in and out teeth require no special tools.
Our 4 Series augers boast effective cutting heads for efficient drilling, and suit mini loaders, skid steer loaders, and excavators up to 5T. Depending on ground conditions, you can choose a bladed or tapered cutting head, or rotating rock picks. For deeper holes, a full range of auger extensions are available for your specific requirement.
Features:
- True cut design ensures a 300mm Auger drills a 300mm hole.
- Drive adaptors & extensions to maximise drilling depth.
- Shallow pitch flights for optimum removal of spoil
- Robust Auger body construction for long life
- Heavy duty tube with highest grade steel
- Variety of hub options.
Specifications:
- Drilling Conditions: General & Clay
- Standard Hub: 65mm Round
- Hub Options: 50.8 mm Round / 57 mm
Square / 75 mm Square
- Overall Length: 1200 mm
- Flights (Lead): 8 mm
- Flights (Carry): 8 mm
- Teeth: TS
- Pilot: PM-SQ
- Ideal Drives: ML / PDD - PD4
Optimum Drilling Speeds - RPM:
- Earth: 55-65
- Clay: 45-55
- Shale (Fracturable Rock): 25-45
- Heavy Rock: N / A
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DIGGA 225MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD- HYDRAULIC DRIVE

This heavy duty professional range for tractors of up to 150 hp with side shift and front or rear mounting is the entry level to the top range of Müthing mulchers along with super heavy professional equipment covers performance ranges of tractors of more than 400 hp.
In large green area maintenance such as taking care of pond edges, lake sides, dykes, ditches, trimming ski pistes, looking after tree nurseries, clearing commercial and fallow areas, maintaining greenery alongside roads and motorways including gullies or preventing scrub invasion - heavy, efficient and reliable mulchers such as this MU-M Vario are required.
Features:
Manufactured from High Quality QSt/E Steel with heavy duty multi position Headstock Cat.
II for front and rear mounting.
Hydraulic side shift: 56 cm lifting range (1 double acting spool valve required).
Gearbox with integrated over run clutch and through drive for 1000 r.p.m.
Automatic belt tensioning.
High tempered M Hammer flails with self sharpening cutting edge to ensure a clean cut and maximum shredding using less power.
Spiral rotor with specially formed flail lugs to protect against damage from obstacles and internal bearings protecting against dirt, wear and tear.
Large self-cleaning roller to carry the flail mower, adjustable for different heights.
Wearing skids.
Stand.
P.T.O. shaft and guarding to ISO Standards.
Optimised distance between the outer rotor circle and the roller guarantees perfect contour following and an even quality of cut..
Purposely designed hood in conjunction with high rotor and cutting speeds and a fixed shredding bar spreads the shredded material evenly behind the roller giving an excellent Mulching and Shredding Quality.
Patented removable shredding bar System: Shark Fin.
Adjustable Vario cutting bar for adjusting the shredding rate
Options:
Shock Absorbing Linkage Springs required.
MU-SOFA weight transfer system, recommended for front-mounted machines.
Heavier PTO shaft with hardened inner pipe and cap bottom lubrication - additional charge.
Refitting for input rotational speed 750nr.p.m.
Rotor with triple Y-blades - additional charge.
Rotor with M shackle flails - additional charge.
Scraperhood inclusive bleed for displaced roller towards the back, starting from model 2016.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wearing Plate (Factory Mounted).
Model:
MU-M 220 2200mm 150 HP WW 2200mm Overall width 2400mm Weight 840kg Flails 18
MU-M 250 2500mm 150HP WW 2500mm Overall width 2700mm Weight 900kg Flails 22
MU-M 280 2800mm 150HP WW 2800mm Overall width 3000mm Weight 970kg Flails 24
MU-M 300 3000mm 150HP WW 3000mm Overall width 3200mm Weight 1100kg Flails 26
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUTHING MU-M 280 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

Hydraulic Top Link End.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HYDRAULIC TOP LINK END (CAT 2)

Find Farm Machinery For Sale in Coopers Plains. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

MUTHING ECOTOP 180 MULCHER (OFFSET 30CM) SUITS 30-75HP

MUTHING MU-H/S 200 REAR & SIDE MULTI PURPOSE FLAIL MOWER

BURDER 1,500KG LIFT CAPACITY JIB (INCL SWIVEL HOOK)

SPAREX HYDRAULIC TOP LINK (CAT 2/2) (80MM CYLINDER BORE) (595MM MIN LENGTH)

DIGGA 375MM AUGER (DEDICATED ROCK) FOR RAMDRILL - HYDRAULIC DRIVE

DIGGA LOADING RAMPS ALUMINIUM STANDARD 4.0T@1.5M - 3.5 (EXT WIDTH 510MM)M - LR403545

MUTHING DRIVING BELT (ONLY)

DIGGA 100MM AUGER (STANDARD- TUNGSTEN) FOR 3 POINT LINKAGE

SHOOF CALVING ROPE 7MM SINGLE EYE - PAIR

DIGGA 225MM AUGER (LIGHT EARTH & CLAY) FOR RAMDRILL PHD- HYDRAULIC DRIVE

MUTHING MU-M 280 MULCHER 150HP WITH HYDRAULIC SIDE SHIFT FRONT & REAR MOUNT HEADSTOCK

SPAREX HYDRAULIC TOP LINK END (CAT 2)

Farm Supplies Machinery & Equipment

Dealer Address