Farm Supplies Machinery & Equipment

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1650kg
No of bearings: 6
No of axles: 2
Cutting width: 2.3m (7ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 6MM DISCS - 0841, SUIT 60-130HP

Machine Suitability:
- Skid Steer Loaders & Excavators (5 - 7.5 Tonne)
Features:
- Oil Pressure Range: 180-240 bar
- Oil Flow Range: 60-95 lpm
- Unit Width: 1,018mm
- Unit Height: 808mm
- Unit Length: 1,962mm
- Cutting width range: 150-350mm
Please select the frame / hitch and chain suited to your machine and application (listed below in options).
All MT trenchers include Flat Face Couplers and Hydraulic Hoses.
Universal Frame Options (to suit XHD range):
- Universal side shift heavy duty
Hitches Options (to suit XHD range):
- 40mm PIN
- 1 3/4" PIN
- 45mm PIN
- 50mm PIN
- 55mm PIN
- 60mm PIN
- 65mm PIN
900mm Trenching Depth Chains (to suit XHD range):
- 150mm x 900mm - Earth
- 150mm x 900mm - Combination
- 150mm x 900mm - Tungsten
- 200mm x 900mm - Earth
- 200mm x 900mm - Combination
- 200mm x 900mm - Tungsten
- 250mm x 900mm - Earth
- 250mm x 900mm - Combination
- 250mm x 900mm - Tungsten
- 300mm x 900mm - Earth
- 300mm x 900mm - Combination
- 300mm x 900mm - Tungsten
- 350mm x 900mm - Earth
- 350mm x 900mm - Combination
- 350mm x 900mm - Tungsten
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AUGER TORQUE XHD900 TRENCHER 4K

Murray Series 54 Smudge Bar 2.1m - 3PL.
Versatile implement that allows the user to level ground, finish dirt driveways, spread sand in horse arenas and more.
Cat I Pins come as standard. Cat II Pins are available. Manufactured from global materials.
Features:
- Made from heavy duty angle steel main frame 75x75x8
- Foldable Three Point Linkage arm for flat pack storage.
Specifications:
Width - 2.1m
Weight - 130kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY SMUDGE BAR 2.1M, 3PL- SERIES 54

The Rubber Series range of Climaxx Ramps are built for use with pneumatic [air filled] tyres, and Multi-Terrain Loader rubber tracks. The unique tread surface of this range has been designed to obtain the highest possible strength and the lightest possible weight, together with a smooth, safe ride.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Government Departments or any application where wheeled, and rubber tracked machinery must be transported safely and effectively.
Featuring the next lowest Ramp weights after the ATV Series & Mower Series whilst maintaining Surewelds full level of quality, select from this range where Ramp weights are critical and machinery with pneumatic tyres or rubber tracks is to be loaded.
Where steel tracks are to be used on Ramps, please refer to the T Series which have a different tread surface to the Rubber Series. Please see the table below, for SureWelds full range of Rubber Series Ramps.
Specifications:
Rated Capacity: 3,000kg
Ramp Mass: 24kg
Ramp Length: 2.9m
Track Width (internal): 300mm
Ramp Width: 400mm
Ramp Depth: 110mm
Features:
Tread Surface of Rubber Series Ramps.
Steel Pin Connection.
Foot adaptable to varying gradients.
Models:
6/1524R - 1,500kg Rated Capacity, 16kg Ramp Mass, 2.4m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/1533R - 1,500kg Rated Capacity, 22kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/1929R - 1,900kg Rated Capacity, 18kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/3016R - 3,000kg Rated Capacity, 12kg Ramp Mass, 1.6m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/3029R - 3,000kg Rated Capacity, 24kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3033R - 3,000kg Rated Capacity, 27kg Ramp Mass, 3.3m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3635R - 3,600kg Rated Capacity, 33kg Ramp Mass, 3.5m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 120mm Ramp Depth
7/4040R - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536R - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833R - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2.9M, 3,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

If you're looking for economical yet powerful fire fighting equipment then look no further than the Fire Marshal On Farm Fire Fighting Trailer. This sturdy trailer offers a great fire protection solution at an affordable price and ensures you're always in control when the threat of fire arises
Features:
- 1,000L free standing pin mount polyethylene tank 15-year tank warranty
- 45mm square straight single axle
- 14 x 6 inch wheels with 5 stud Ford hubs and 185R 14C all terrain light truck 5 ply radial tyres
- Swing-away jockey wheel and 50mm tow hitch ball coupling
- 2 inch 490L/min Aussie Fire Chief centrifugal pump coupled to GX160 Honda motor mounted to front pump plate
- 36m of AS1221 fire hose on heavy duty poly hose reel, with adjustable fire fighting nozzle
- 6m bottom fill kit enables quick refill from dams, rivers, troughs etc.
Options:
- Fitted ball baffle 355mm diameter (1 ball per 40 litres)
Trailer Accessories:
AQCW001K - Pair of Oz-Chock poly wheel chocks with stainless steel holders
AQSLF001AV1 - Flashing amber 12 volt beacon
AQSR001LY - Reflective 3m lime yellow clearance tape on extremities
AQSFD045K - 4.5kg Dry Powder Fire extinguisher with mount ABE
AQSFD090K - 9kg Dry Powder Fire extinguisher with mount ABE
Toolbox Options:
AXMT002 - Aluminium toolbox medium
AXMT003 - Aluminium toolbox large
AMAQTP003SG - poly toolbox
Hydrant Filler Kit Options:
ARHCV025 - 25mm overhead tank filler with check valve & hose fitting
ARH038 - 38mm hydrant tank filler with camlock fittings
ARH050 - 50mm hydrant tank filler with camlock fittings
ARH080 - 80mm hydrant tank filler with camlock fittings
Trailer Wheels, Tyres & Couplings Options:
AQW015LK - Spare wheel & tyre with mounting bracket - 15 inch with Landcruiser hub pattern (suits trailers 600-3,000L capacity
AQW015L - Spare wheel & tyre only - 15 inch with Landcruiser hub pattern (suits trailers 600-3,000L capacity)
AQW014FK - Spare wheel & tyre with mounting bracket - 14 inch with Ford hub pattern (suits 1,000L silver selection trailers)
AQW014F - Spare wheel & tyre only - 14 inch with Ford hub pattern (suits 1,000L silver selection trailers)
CTJ006S - Jockey wheel, solid tyre, 6 inch swing away
CTJ008S- Jockey wheel, solid tyre, 8 inch swing away, heavy duty
CTHR02S - Ring hitch, swivel, to suit pintle hook, for on farm trailers
CTHR02SV - Ring hitch, swivel, to suit pintle hook, for hydraulic override brake trailers
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID SPRAY 1,000L FIRE MARSHAL TRAILER (ON FARM)

The PT Series are the specialised range of Climaxx Ramps designed for use with All Surface Loader Rubber Tracks. The tread surfaces in this range are configured to reduce the possibility of damage to these types of tracks and are generally wider than Rubber Series and T Series Ramps. Ideal for owners and operators who need to safely and effectively transport machinery fitted with All Surface Loader Rubber Tracks.
Whilst catering for the distinctive features of such tracks, these models can also be used with pneumatic tyres. Select from this range where machinery fitted with All Surface Loader Rubber Tracks as well as machinery with pneumatic tyres are to be loaded.
For loading machinery with Steel Tracks [including with Rubber Pads], the Climaxx T Series Ramps must be used. Where machinery with pneumatic tyres, or rubber tracks is to be loaded, the Climaxx Rubber Series offer a more lightweight and economical alternative. Please see the table below, for the full range of Climaxx PT Series Ramps.
Specifications:
Rated Capacity: 4,800kg
Ramp Mass: 42kg
Ramp Length: 3.3m
Track Width (internal): 500mm
Ramp Width: 610mm
Ramp Depth: 125mm
Features:
Tread Surface of PT Series Ramps.
Steel Pin Connection.
Foot matching Ramp gradient.
Models:
7/3033PT - 3,000kg Rated Capacity, 36kg Ramp Mass, 3.3m Ramp Length, 450mm Track Width (internal), 550mm Ramp Width, 110mm Ramp Depth
7/3033PTW - 3,000kg Rated Capacity, 38kg Ramp Mass, 3.3m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 110mm Ramp Depth
7/3635PT - 3,600kg Rated Capacity, 41kg Ramp Mass, 3.5m Ramp Length, 450mm Track Width (internal), 550mm Ramp Width, 120mm Ramp Depth
7/4526PT - 4,500kg Rated Capacity, 46kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 610mm Ramp Width, 125mm Ramp Depth
7/4536PTW - 4,500kg Rated Capacity, 48kg Ramp Mass, 3.6m Ramp Length, 550mm Track Width (internal), 660mm Ramp Width, 125mm Ramp Depth
7/4833PT - 4,800kg Rated Capacity, 42kg Ramp Mass, 3.3m Ramp Length, 500mm Track Width (internal), 610mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.3M, 4,800KG CAPACITY (61CM WIDTH) CLIMAXX PT SERIES LOADING RAMP

Designed for extremely tough conditions and is one of the strongest linkage disc ploughs available. Heavy weighted gangs provide excellent digging ability.
Features:
Each machine takes approximately 2-3HP per disc to pull, depending on conditions.
Prong scrapers are also available for heavy clay soil.
Twin spring loaded pressure screws prevent damage in rocky or undulating conditions.
Easy gang angle adjustment.
Fitted with hard wearing European Bellota Boron discs at 9 inch spacing. Available in 22x5mm(or optional 24x5mm sizes).
Cat 1 & 2 linkage.
28mm square high tensile axles.
Greaseable flanged disc bearings with excellent sealing to exclude contaminants.
Solid cast spools, individually machined, provide all the weight in the gangs rather than in the frame (which can add load onto the bearings.
Specifications:
Disc Size 22inch dia, 5mm thick, Scallop Disc
Approx Weight- 910kg
No. Bearings 8
No. Axles 4
Cutting Width 2.5m(8ft 3inch)
Options:
0949 Optional Scrapers suit 22 plate GM40.
0953 Optional Furrow filler (not sold separately).
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS GM40 22 PLATE HEAVY DUTY OFFSET DISCS - 0812, 2-3HP PER DISC

Trailed over row TGS 2 row 3000 litre sprayer with 182 L/min pump, electric valve controls and 500mm twin turbine fan. Ideal for vineyards and berries. Note: infield product images are of 2 row 2000L TGS.
Specifications:
Market: Horticulture. Viticulture.
Tank Size (L): 3,000
Connection Type: Trailed
Min PTO hp: 75
Pump Size (L/min): 182
.
Application: Vineyards, berries
Features:
Head: Multi row spraying head with air assist diffusers and twin spray nozzles. Each air diffuser features swivel adjustment and air deflector. Poly air tubes shaped to surround canopy. Both arms have independent hydraulic fold with manual width & height adjustment (2 tractor remote sets required).
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifolds. IDS1701: 161L/min. capacity 5000kPa pressure. IDS2001: 182L/min. capacity 5000kPa pressure.
Fan Size: 500mm twin impeller turbine fan, power consumed 48 kw (64HP).
Nozzles: Twin hollow cone ceramic nozzles per outlet with individual on/off non-drip taps.
Gearbox: 2-speed with neutral position, oil-bath type
Controls: 40 Bar electric section valves, master valve, electric pressure regulator and in cab controls
Frame: Galvanised steel chassis, adjustable drawbar with jockey wheel.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
Chem Induction: Suction probe with detachable hose.
Agitation: Pump bypass plus venturi agitator.
Pressure Gauge: 0-60 bar glycerine filled gauge fitted to pump.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem simplicity suspension with 10 x 15" wheels & tyres. (2000L & 3000L) or 11.5 x 15.3" wheels & tyres (3500L & 4000L)
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 75 PTO HP
Options:
- IDS2600 pump, 249L/min capacity, 5000kPa pressure (D99-149)
- Bravo 180S automatic rate controller (D99-143)
- Vertical lift head assembly (1 extra set of tractor remotes required) (TGS-LIFT)
- Quick turning hitch (D99-170)
- Hydraulic row width adjustment (1 extra set of tractor remotes required) (D99-186)
- Road kit (D99-151)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,000L (2 ROW) TGS TRAILED SPRAYER - MIN 75PTO HP

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 2190kg
No of bearings: 12
No of axles: 6
Cutting width: 3.2m (10ft 6inch)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 26 INCH 6MM SCALLOP DISCS - 0872, SUIT 75-165HP

The Munro Multi-Sett is the machine for all your every day fencing jobs.
This labour saving, all weather system is easy to operate and capable of installing posts up to 8ft.
Its speed and accuracy of setting makes it one of the most efficient and economical machines on the market.
Combines, in one machine, a fast action earth auger for drilling a pilot hole, with a powerful post driver for setting a tight post every time.
Handles all types of posts with ease...
Steel
Star
Treated pine
Concrete
Split
Square
Round
Railway sleepers
Powerful, Flexible, Tough Hydraulic reversible auger drive with a wide range of augers for different post sizes and ground conditions.
Forward, aft and sideways tilts combined with a wide base and two separate stability pads allows safe and efficient operation on hills or sloping ground.
Precise ergonomically located controls allow posts to be set quickly and accurately without fuss.
Has low overall height but still copes with normal posts.
Firm and Fast post setting, with feather touch controls
The 227kg (500lb) post driving dolly is under the full control of the operator at all times.
Variable Dolly control allows a few small taps to start the post, followed up by full stroke hits will drive the post to the required depth quickly.
The inbuilt hydraulic damper at the top of the dolly stroke cushions the dolly, reducing mechanical fatigue and increasing cylinder life.
The dolly can be stopped at any point in its downward stroke without damage to the machine. The squelch valve safely dissipates all of the load created by stopping the dolly suddenly.
Optional Items include the following...
Power Pack Kit (to drive off the PTO shaft for tractors which do not have suitable remote hydraulics. A hydraulic power pack is available which uses the tractors PTO shaft.)
Side Shift (rear mounted Hydraulic)
Double Side Shift (operates both sides)
Additional Driving Weights
FenceMate Hydraulic Wood Borer with5/8 drill chuck
Skid Steer Attachment Plate
FEL Mounted Wire Winder with Euro Hitch
Augers : sizes available from 70mm - 305mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO MULTISETT POST DRIVER INCL AUTODIGGER & TILTS

Simple & secure.
Looking for a quick and easy method to join chain or wire rope? Our zinc plated snap hooks at perfect for little odd jobs such as securing your dog to a chain.
A small spring within the snap hook closes the hook once it has latched onto something. Quick, easy and secure.
Not For Rockclimbing. Carabiners are a big thing in the rock climbing industry, but our carabiners are not rated for rock climbing. DO NOT USE.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 2+.
Specifications:
- 5mm hook O.D
- 50mm height
- 7mm opening
- Zinc plated
Features:
- Easy to use
- Secure one latched
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 5MM SNAP HOOK (CARABINERS) ZINC PLATED - SH05

Series 30 3.20m Mounted Spring Tine Harrow System - Light Duty 2 Rank- Straight Tines.
The Series 30 Light Duty is the perfect implement for sandy to light soils. Specifically designed to increase trash flow using wide spacing between each straight tine, the 2 rank is a lighter duty harrow available in five sizes ranging from 1.78m (510) to 3.20m (106). Each section is supplied complete with two mount arms.
Harrow depth control is adjustable by means of specially designed cam-action fitting within the mount arm.
Specifications:
- Coverage: 3.20m
- Weight: 80kg
- Tine spacing 85mm (3 3/8) 2 Rank.
- Tine Diameter 10mm Straight Tine.
- Tine length 385mm (15) approx.
- Rank Spacing 324mm (12 3/4").
- 2 Mount Arms per unit.
- Mount clamp suits 81mm to 100mm (3 1/4 to 4) square frame positioned on the flat or on the edge (Spacers
required for 75mm [3] square frame).
Features:
- May be attached to the rear bar of light duty cultivators, seeding drills, etc.
- Unit features two Series 30 Mount Arms.
- A cam incorporated in the mount clamp adjusts the height of the Harrow Tine Section.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY 3.20M MOUNTED SPRING TINE HARROW SYSTEM - LIGHT DUTY - 2 RANK

Find Farm Machinery For Sale in Coopers Plains. Browse 7663 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 6MM DISCS - 0841, SUIT 60-130HP

AUGER TORQUE XHD900 TRENCHER 4K

MURRAY SMUDGE BAR 2.1M, 3PL- SERIES 54

SUREWELD 2.9M, 3,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

RAPID SPRAY 1,000L FIRE MARSHAL TRAILER (ON FARM)

SUREWELD 3.3M, 4,800KG CAPACITY (61CM WIDTH) CLIMAXX PT SERIES LOADING RAMP

JOHN BERENDS GM40 22 PLATE HEAVY DUTY OFFSET DISCS - 0812, 2-3HP PER DISC

SILVAN 3,000L (2 ROW) TGS TRAILED SPRAYER - MIN 75PTO HP

JOHN BERENDS RM80 HD TRAILING OFFSET 28 PLATE 26 INCH 6MM SCALLOP DISCS - 0872, SUIT 75-165HP

MUNRO MULTISETT POST DRIVER INCL AUTODIGGER & TILTS

ROTECH RURAL 5MM SNAP HOOK (CARABINERS) ZINC PLATED - SH05

MURRAY 3.20M MOUNTED SPRING TINE HARROW SYSTEM - LIGHT DUTY - 2 RANK

Farm Supplies Machinery & Equipment

Dealer Address