Farm Supplies Machinery & Equipment

The oscillating spreader is designed for precise application of fertiliser and seed at medium to low rates. The oscillating spout will apply product accurately from 5 to 14 metres depending on material being spread as well as left or right hand banding.
Spreader is supplied with spouts for banded spreading for either 3 metre or 7 metre wide rows. (Note: Banded spreading will still allow some product to spread in centre).
Construction: Heavy duty construction for long service life. The hopper is manufactured from non-corrosive UV stabilised impact resistant polyethylene. The frame is made of galvanised, high strength tubular steel. Spout formed from fibreglass reinforced nylon.
Driveline: Quality PTO driveshaft with approved safety cover. Continuous stroke flywheel with spring loaded drive coupling. Oscillating mechanism operates in oil bath for long service life.
Height Control: Single lever control for adjusting spreading volumes. Two spouts supplied for banding. Long agitator supplied as standard.
Specifications:
Market: Horticulture. Ag Lifestyle
Connection Type: Linkage
Product Weight (kg): 156
Height / Width / Length (mm): 1190 / 1510 / 1510
Capacity: 1000 L
Width of Throw : 6-14m
Options:
Hydraulic Control - 800 & 1000 litres models
Hopper Cover - 800 & 1000 litres models
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1,000L SQTF OSCILLATING SPREADER

Simple. Adjustable.
No more Sagging Gates.
Looking for an easy to install, adjustable bolt-on hinge set that wont let your gate sag?
Our bolt-on adjustable hinge for round posts, are strong, simple to install, safe for livestock, long-lasting, and will never sag. No welding, easily adjustable, and rust-resistant. This patent-protected design will have your gates swinging smoothly faster than you thought possible.
How Does The Adjustment Work?
The bottom gudgeon pin on this bolt-on round post gate kit allows you to adjust the gate angle easily, whenever its required.
With 140mm (5 ½) of vertical adjustment, there will be no more gates dragging on the ground, or sticking up in the air. Now you can get the swing just right every time!
Smooth Swinging Gates. Sorted.
The bottom gudgeon pin on this bolt-on round post gate kit allows you to adjust the gate angle easily, whenever its required.
No more gates dragging on the ground, or sticking up in the air. Now, you can get the swing just right.
The FG6 can be installed in minutes, with no welding or drilling. All you need is a shifter.
Because this is a bolt-on gate kit, it can be taken off, adjusted, turned around, etc at any time, easily.
Warning: No adjustment = Sagging gates.
Don't waste your time and money on non-adjustable bolt on hinges. Rotechs adjustable bottom gudgeon pin allows you to adjust the gate angle easily, whenever its required.
Price quoted is for one set.
* Latch not included

Discounts apply for bulk kit purchases of 10+, 25+, 50+ or 100+.
Features:
- Steel post
- Bolt on
- No power needed
- 19mm socket or spanner
- Adjustable all directions
- Galvanised
- Anti-bruise design
Specifications suit:
- 25NB gate
- 150NB post
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL BOLT-ON ADJUSTABLE ROUND POST HINGE SET 25NB X 150NB- FG6150

Trailed air assist Supaflo 1,500 litre sprayer with 161 L/min diaphragm pump, electric controls, a Glideflex axle upgrade, wide angle shaft and a 900mm fan.
Ideal for vineyards and orchards.
Specifications:
Market: Horticulture. Viticulture
Tank Size (L): 1500
Connection Type: Trailed
Min PTO HP: 60
Pump Size (L/min): 161
Height / Width / Length (mm): 1530 / 1540 / 3540
Product Weight (kg): 540 (dry)
Application: Vineyards and Orchards
Features:
Pump: Silvan oil-backed diaphragm type with nitrile diaphragms and corrosion resistant, cast anodised aluminium body with brass heads and manifold. IDS1701:161L/min. capacity, 5000kPa pressure.
Fan size: 900mm axial flow type, 10 bladed fan with curved nylon reinforced blades, air straightening vanes and protective mesh cover. Powerhead (920mm) & Radak (1,000mm) fitted with axial flow type, 10 bladed fan, centrifugal clutch and protective mesh cover.
Nozzles: Flip-over type for dilute/concentrate spraying. Ceramic jets, stainless steel swirl-plates. 16 double sided nozzles (8 per side) twist on/off. The Powerhead has 24 double sided nozzles (12 per side) and the Radak has 32 (16 per side).
Gearbox: 2-speed with neutral position, oil-bath type
Control: 40 bar electric section valves, master valve, electric pressure regulator and in cab controls.
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip-top easy open lids, 40mm drain valve and built-in chemical mixer. 40L fresh water hand wash tank.
Frame: Galvanised steel with jockey wheel & adjustable drawbar.
Agitation: Pump bypass plus venturi agitator.
Pressure gauge: 100mm, 0-60 bar glycerine filled gauge.
Filtration: Lid strainer, suction line strainer & stainless steel nozzle filters.
Wheel Equipment: Glideflex suspension axle, 2x15" tubeless tyres on galvanised rims (max speed rating 30 km/h)
PTO Driveshaft: Quality Bondioli & Pavesi constant velocity driveshaft with quick release pins & safety cover.
HP Required: Min 60 PTO HP
Options:
- Powerhead Conveyor (in lieu of standard fan cowling) (D99-184)
- Radak Conveyor - Manual adjustment of top and bottom wings (In lieu of standard fan cowling) (D99-135)
- Hydraulic kit for Radak Conveyor (top wings) (D99-155B)
- SCRAM Jet (to suit Radak Conveyor) (D99-180)
- One sided conveyor (D99-41)
- Leaf guard (to suit Powerhead & Radak) (D99-175)
- Twin nozzle (includes extra nozzles) (D99-182)
- Two-sided poly vineyard conveyor (D99-111)
- Bravo 180S automatic rate controller (D99-143)
- Flotation tyres - 400/60 x 15.5" with fixed axle (in lieu of standard singles) (D99-80)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1,500L SUPAFLO TRAILED SPRAYER - MIN 60PTO HP

The PT Series are the specialised range of Climaxx Ramps designed for use with All Surface Loader Rubber Tracks. The tread surfaces in this range are configured to reduce the possibility of damage to these types of tracks and are generally wider than Rubber Series and T Series Ramps. Ideal for owners and operators who need to safely and effectively transport machinery fitted with All Surface Loader Rubber Tracks.
Whilst catering for the distinctive features of such tracks, these models can also be used with pneumatic tyres. Select from this range where machinery fitted with All Surface Loader Rubber Tracks as well as machinery with pneumatic tyres are to be loaded.
For loading machinery with Steel Tracks [including with Rubber Pads], the Climaxx T Series Ramps must be used. Where machinery with pneumatic tyres, or rubber tracks is to be loaded, the Climaxx Rubber Series offer a more lightweight and economical alternative. Please see the table below, for the full range of Climaxx PT Series Ramps.
Specifications:
Rated Capacity: 4,500kg
Ramp Mass: 46kg
Ramp Length: 3.6m
Track Width (internal): 500mm
Ramp Width: 610mm
Ramp Depth: 125mm
Features:
Tread Surface of PT Series Ramps.
Steel Pin Connection.
Foot matching Ramp gradient.
Models:
7/3033PT - 3,000kg Rated Capacity, 36kg Ramp Mass, 3.3m Ramp Length, 450mm Track Width (internal), 550mm Ramp Width, 110mm Ramp Depth
7/3033PTW - 3,000kg Rated Capacity, 38kg Ramp Mass, 3.3m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 110mm Ramp Depth
7/3635PT - 3,600kg Rated Capacity, 41kg Ramp Mass, 3.5m Ramp Length, 450mm Track Width (internal), 550mm Ramp Width, 120mm Ramp Depth
7/4526PT - 4,500kg Rated Capacity, 46kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 610mm Ramp Width, 125mm Ramp Depth
7/4536PTW - 4,500kg Rated Capacity, 48kg Ramp Mass, 3.6m Ramp Length, 550mm Track Width (internal), 660mm Ramp Width, 125mm Ramp Depth
7/4833PT - 4,800kg Rated Capacity, 42kg Ramp Mass, 3.3m Ramp Length, 500mm Track Width (internal), 610mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.6M, 4,500KG CAPACITY (61CM WIDTH) CLIMAXX PT SERIES LOADING RAMP

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions.
The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles.
Ideal for primary and secondary tillage for 60HP-130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 2120kg
No of bearings: 8
No of axles: 4
Cutting width: 3.2m (10ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

Series 08 - 4.31m Stump Jump Harrow 3 Point Linkage Hoist Lift Type (4 point pull) featuring Series 21 Hoist Frame - Complete Set.
Please note 2nd picture shows how harrows are attached to frame, but the harrows in that picture are not stump jump harrows. Picture is for example only.
Complete Set Comprises - Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Series 21 3-Point Linkage Hoist Frame.
8031 - 5 section 4.31m (14ft 2in) - 349kg.
If your ground is uneven, roughly cleared or contains light stony areas then the flexible Murray series 08 Stump Jump Harrow is the secondary tillage implement to consider.
Ruggedly constructed using High Carbon Steel, the floating stump jump action is a time tested agricultural implement.
Suitable for breaking down clods, final seed preparation of ground and levelling pugged up or packed down heavy pasture country, Stump Jumps are also ideal for use in the preparation stage of vegetable growing and weed control.
Each Stump Jump section is attached to the drawbar by four hitching points one ahead of each row of tines, to ensure true tracking and correct stump-jump action.
Sets complete with drawbars range from coverage of 1.72mm (5ft 8in) to 8.63m (28ft 4in).
Available as a Lift Type set utilising our Series 21 Three Point Linkage Hoist Frame for ease of transportation. Set includes Front Lift Drawbar, Harrow sections, Rear Lift Drawbar including Lift Clips and Hoist Frame.
100% Australian made and owned.
Specifications:
- Coverage 4.31m (14ft 2in).
- Weight 349kg
- Tine spacing 44mm (1 3/4in).
- Tine length 197mm (7 3/4in) approx.
- Centre to centre of Front Hooks 222mm (8 3/4in).
- 5 Ranks / 20 Tines.
Features:
- 4 Point Pull (4PP). Cut Tine ends, pipe spacers throughout
section.
- Manufactured from 32 x 10mm carbon steel.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY 4.31M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

The Munro AutoDriver is the machine of choice for contractors, vineyard operators and government departments. Available in this model 730, 900 or a 1300 version. 730 means 730 Joules (impact) of energy up to 950 times per minute. 900 means 900 Joules (impact) of energy up to 950 times per minute.
The AutoDriver has a patented down force system that can add a percentage of the tractor mass to the driver, making it the most efficient machine on the market. Without this down force system, these types of machines lose most of their efficiency trying to drive the machine up instead of the post down.
The AutoDriver driving function is a one handed operation allowing operators to adjust the machines tilt whilst driving to ensure a straight post. The auger is hydraulically engaged and stowed and can have down force applied.
The system is easy to operate. Its speed and accuracy of setting makes it the most efficient and value-for-money machine on the market.
Combines in one machine, a fast action earth auger for drilling a pilot hole, with a powerful post driver for setting a tight post every time.
Handles all types of posts with ease...
Steel
Star
Treated pine
Concrete
Split
Square
Round
Railway sleepers
Powerful, Flexible, Tough
The safest and most efficient machine on the market
Automatic hammer does not leave the top of the post.
Single handed hammer and combined down force operation
Hydraulically engaged auger
Hydraulic reversible auger drive with a wide range of augers for different post sizes and ground conditions.
Drills to 1200mm (4)
Forward, aft and sideways tilts combined with a wide base and two separate stability pads allows safe and efficient operation on hills or sloping ground.
Precise ergonomically located controls allow posts to be set quickly and accurately without fuss.
Has low overall height but still copes with normal posts
Firm and Fast post setting, with feather touch controls
Comes in telescopic version for taller posts
Optional Items include...
TAD (Tractor Added Down force to deliver full energy
Power Pack Kit with Oil Cooler
Side Shift
Double Side Shift
Guide Rings per ring
FenceMate Hydraulic wood borer
Skid Steer attachment plate
Guide ring carrier
FEL mounted wire winder (Euro Hitch)
Augers : sizes available from 70mm - 305mm
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MUNRO (50-65 LPM) AUTODRIVER STANDARD POST DRIVER

When it comes to performance the high output Multicut 820 will go way beyond your expectations delivering a massive 8.2 metres of cutting width to effectively eat your way through the greatest of workloads. Couple the Multicut 820 with a powerful tractor of 150HP plus and allow time to roll by as output in excess of 100 hectares per day is easily achievable.
Key to the performance of the machine is the industry leading flat underside deck to maintain mulch quality and consistency of spread over the full cutting area. A six gearbox driveline delivers exceptional power, each with slip clutch protection and a clean cut is delivered by five rotors each carrying three high-lift swinging blades. Extremely robust in construction the Multicut 820 is configured with large wheels, full width walking axles and hydragas suspension to provide a smooth ride.
Features:
Reinforced mega strength deck structure
Built in shock absorbs
Hydragas suspension
Full width walking axle
Heavy duty axle links
Heavy duty implement tyres
Full width front & rear safety chains
Full length side skids
Hydraulic wing lift & support
Premium long lift shaft drive
Dual stand legs
Swivel towing eye
Universal drawbar for high or low towing
Adjustable levelling tie bars
Slip clutch protection
111HP rotor box
Anti-scalp disc
Heavy duty winged updraught blades
250HP splitter box
Integrated seal protector
Includes carrier & hardware for easy fitting of starcut
Specifications:
Machine weight (with front and rear single chain guards): 4,330kg / 9,546lbs
Hitch: Multi-positional drawbar
Cutting width: 8.06m / 26' 5"
Working machine width: 8.26m / 27' 1"
Transport machine width: 2.81m / 9' 3"
Maximum working length: 6.33m / 20' 9"
Transport length: 6.07m / 19' 11"
Deck height (underside of deck to skid): 0.24m / 10"
Transport height: 3.78m / 12' 5"
Cutting height: 25mm 210mm (1" - 1/16")
Cutting capacity: 100mm / 4"
Recommended tractor hp: 150hp / 112kW
Wing working angles: 45 degrees up / 15 degrees down
Power take-off speed: 1,000rpm
Gearbox (splitter): Cast iron housing
Gearbox (rotor gearboxes (x5)): Cast iron housing
Input shaft: 1 - 3/4" Z20 SFT 10 tractor end
Gearbox oil capacity (splitter gearbox): 2.7L / 4.7 pints
Gearbox oil capacity (centre + inner rotor gearboxes): 3.5L / 6.2 pints
Gearbox oil capacity (outer rotor gearboxes (x4)): 2.1L / 3.7 pints
Deck construction: All welded construction
Deck material thickness: 5mm (3/16")
Side skirt material thickness: 6mm (4/16")
Skid construction: Replaceable bolt on skid shoes
Anti-scalp dish (outer wing rotors): 6mm (1/4") round pan with blade holder bar
Blades (x15): 12mm (1/2") 30 carbon boron hardened and tempered. Free swinging high lift low friction. Handed.
Blade bolts: M24 C/W shank grade 8.8
Blade tip speed (1,000rpm): 79mps / 15551fpm
Driveline: ASAE Category 4
Driveline protection: 2/4-way slip clutches on rotor gearboxes. Overrun on input shaft
Tailwheel mount assemblies: Tubular welded walking axles
Tailwheels (x8): 7 - 12 pneumatic tyre with steel hub
Front & guards: Single chain guards on each deck
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIELDQUIP MULTICUT 820 FLEX WING SLASHER (MIN 150HP)

Built in Australia using Diesel-grade Hexathen material. This heavy duty, above ground Diesel single skin storage tank is ideal for Australian conditions. The PE material is UV stabilised for longer life in Australias harsh sun.
Tested and certified to Australian Standards AS/NZS 4766 and with a 5 year warranty this is the ideal fleet solution for your bulk diesel storage needs.
This Diesel storage tank is ideal for farming, civil, construction, farming, fleet industries and mining.
We also have a wide range of fittings and accessories that can be added to this tank to suit your specific safe Diesel storage needs.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 5,000L DIESEL BULK STORAGE TANK (SINGLE WALL)

Ideal for small areas or occasional spot spreading. The Earthway 3400 Hand Operated Spreader is an ergonomic spreader for use with seed, fertiliser and any granular material.
Designed with an integrated scoop design, the 3400 can grab the product out of bags or cans so you dont need to touch the material you are spreading.
Small, cost effective and easy to store due to it's compact size.
Features:
Rustproof poly 110 cubic inch/1.8 litre capacity
Adjustable rate control
High-speed hand crank gearbox
1-Year Limited Warranty
Ergonomic handle and scoop front design
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

EARTHWAY HAND HELD SPREADER EARTHWAY- ES-3400

Long lasting, versatile steel chain. Looking for strong rust-proof chain? Our galvanised chain will suit any use you can think off. From securing a yard, to cleaning up around the farm, there is little our chain cant do.
Looking for a versatile and long lasting chain for use on your farm? Our galvanised chain is made from quality steel to ensure a strong chain.
Whatever your needs, we have the right size for you;
- Our 3mm and 4mm chain is great for dog chains.
- Our 5mm, 6mm and 8mm chain is perfect for securing your gates and stockyards.
- Maybe you need something heavier to clean up around the farm? Our heavy duty 10mm and 13mm chain is perfect for heavier jobs.
No matter your requirements, we can help.
Price quoted is for one item.
Specifications:
- 4mm chain
- 14 X 26mm link size (WXH)
- 25kg/bucket
- 76m Approx
- Galvanised
Features:
- Strong & long lasting
- Versatile
- Range of sized
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 4MM GALVANISED CHAIN - 25KG (76M) - GC0425

The coil tines are 30mm square, and are used for primary and secondary cultivation.
They are ideal where deep penetration is required without bringing subsoil up to the surface. They are commonly used in market garden operations to penetrate beneath the normal level of cultivation.
The coil allows the tine to move, assisting penetration and reducing horsepower needed. Coil tines do not disturb the surface as much as the wider chisel plough tines. This is useful in operations as pasture renovation and plough or rotary hoe pan breaking.
The finer tine is also good for secondary cultivation where a heavy machine is needed for heavy soils. Overall width of the machine is 9 wider than the cut width ie: 5 tine is 5 9, 7 tine is 7' 9' and so on.
Features
The frame is 100 x 100 x 6mm, similar to the rigid chisel plough
Cat 1 & 2 Linkage
Extra tines can be fitted if required to reduce tine spacing
30mm square high resistance hardened double coil tines.
Available in 5, 7, 9 and 11 tine sizes with tines at 12 adjustable spacings
Horsepower requirements vary widely but 8-10 HP per tine is a rough guide
Excellent underframe trash clearance of 520mm
The wheel kit consists of a pair of 14 Holden wheels, height adjustable, fitted on the outside of the machine (increasing the overall width approx 450mm (18)
Options:
0200 Depth Wheels (Pair Holden)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS COIL TINE CHISEL PLOUGHS 9 TINES - 0206

Find Farm Machinery For Sale in Coopers Plains. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

SILVAN 1,000L SQTF OSCILLATING SPREADER

ROTECH RURAL BOLT-ON ADJUSTABLE ROUND POST HINGE SET 25NB X 150NB- FG6150

SILVAN 1,500L SUPAFLO TRAILED SPRAYER - MIN 60PTO HP

SUREWELD 3.6M, 4,500KG CAPACITY (61CM WIDTH) CLIMAXX PT SERIES LOADING RAMP

JOHN BERENDS RM75 HD TRAILING OFFSET 28 PLATE 5MM DISCS - 0833, SUIT 60-130HP

MURRAY 4.31M STUMP JUMP HARROW COMPLETE SET - 3PL HOIST LIFT TYPE (4 POINT PULL)

MUNRO (50-65 LPM) AUTODRIVER STANDARD POST DRIVER

FIELDQUIP MULTICUT 820 FLEX WING SLASHER (MIN 150HP)

POLYMASTER 5,000L DIESEL BULK STORAGE TANK (SINGLE WALL)

EARTHWAY HAND HELD SPREADER EARTHWAY- ES-3400

ROTECH RURAL 4MM GALVANISED CHAIN - 25KG (76M) - GC0425

JOHN BERENDS COIL TINE CHISEL PLOUGHS 9 TINES - 0206

Farm Supplies Machinery & Equipment

Dealer Address