Farm Supplies Machinery & Equipment

Ever wanted to swap your chemical out to a different chemical in the middle of spraying? Now you can with the all new RapidMix clean tank technology.
With separate chemical and main water tanks, the RapidMix Sprayer mixes the chemical as they exit the spray gun meaning no more messy and wasteful pre-mixing of chemicals.
With additional chemical tanks (refer to spare tank listed below) available for purchase, you can now have multiple chemicals set up, ready to go for when you next need to spray without needing to clean your RapidMix every time you want to change chemicals.
Specifications:
- 57L main UV-stabilised translucent tank easy to view liquid levels
- 12V 8.3L/min 60psi pump
- 7 mixing rate settings for chemical dilution from 7 117ml/L
- Flow control valve
- Quick change between boom or spot spray
- 12cm wide opening mess free mixing and filling
- Removable filter basket
- Drainage cap for quick empty
- Poly spray lance with cushioned grip trigger
- 4.5 metres of reinforced hose
Spare Tank:
PTCM0005L - Spare Rapidmix 5L Concentrate Tank (for 57L Sprayer)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RAPID SPRAY 57L RAPIDMIX SPRAYER

The RM75 offset disc cultivating plough is a tough, rugged machine designed for Australian conditions. The RM75 is similar to the RM80 with the main difference being in the lesser number of bearings and longer axles. Ideal for primary and secondary tillage for 60 -130HP tractors.
Features:
Fitted with 24 inch x 5mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacture failure.
Fitted with two 750×16 Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8 inch Australian made Eaton rams.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400psi.
Twin pressure screws can be adjusted individually to transfer weight to the rear of the plough, resulting in even disc penetration.
40mm square high tensile gang bolts.
Flange disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Fitted with hydraulic lift as standard.
Prong type scrapers are standard formed scrapers on request.
Parking jack is optional.
Optional furrow fillers available.
Specifications:
Approx Weight: 1650kg
No of bearings: 6
No of axles: 2
Cutting width: 2.3m (7ft 6inch)
Options:
0951 Optional jack
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

The Rubber Series range of Climaxx Ramps are built for use with pneumatic [air filled] tyres, and Multi-Terrain Loader rubber tracks. The unique tread surface of this range has been designed to obtain the highest possible strength and the lightest possible weight, together with a smooth, safe ride.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Government Departments or any application where wheeled, and rubber tracked machinery must be transported safely and effectively.
Featuring the next lowest Ramp weights after the ATV Series & Mower Series whilst maintaining Surewelds full level of quality, select from this range where Ramp weights are critical and machinery with pneumatic tyres or rubber tracks is to be loaded.
Where steel tracks are to be used on Ramps, please refer to the T Series which have a different tread surface to the Rubber Series. Please see the table below, for SureWelds full range of Rubber Series Ramps.
Specifications:
Rated Capacity: 6,000kg
Ramp Mass: 52kg
Ramp Length: 3.6m
Track Width (internal): 500mm
Ramp Width: 600mm
Ramp Depth: 165mm
Features:
Tread Surface of Rubber Series Ramps.
Steel Pin Connection.
Foot adaptable to varying gradients.
Models:
6/1524R - 1,500kg Rated Capacity, 16kg Ramp Mass, 2.4m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/1533R - 1,500kg Rated Capacity, 22kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/1929R - 1,900kg Rated Capacity, 18kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/3016R - 3,000kg Rated Capacity, 12kg Ramp Mass, 1.6m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/3029R - 3,000kg Rated Capacity, 24kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3033R - 3,000kg Rated Capacity, 27kg Ramp Mass, 3.3m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3635R - 3,600kg Rated Capacity, 33kg Ramp Mass, 3.5m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 120mm Ramp Depth
7/4040R - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536R - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833R - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.6M, 6,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

Sureweld Aluminium Walk Boards are built for use in a broad range of industries requiring portable foot access Ramps. Low profile side stiles with lengths and widths designed for the most common truck chassis sizes, these Walk Boards are particularly useful to the Motor Body Building Industry.
Walk Boards provide a lightweight, safe and convenient solution for manual handling and trolley work in a broad range of applications including:
Maintenance Vehicles, Removalists, Food Transport Vehicles, Events Organisers, Handymen, Repair Vehicles, Site Maintenance Services, Party Hire, Cleaning Services, Concrete Cutting Services, Rental Trucks, Charity Organisations, Commercial Equipment Hire, Delivery Vans, Taxi Trucks, Light Industrial Equipment, Animal Transport, Demonstration Vehicles, and Emergency Response Vehicles.
Specifications:
Rated Capacity: 300kg
Walk Board Mass: 44kg
Walk Board Length: 3.5m
Walk Board Width: 790mm
Walk Board Depth: 75mm
Features:
Tread Surface of Walk Boards.
Steel Pin Connection.
Foot matching Ramp gradient.
Models:
WB2772 - 300kg Rated Capacity, 33kg Walk Board Mass, 2.7m Walk Board Length, 720mm Walk Board Width, 75mm Walk Board Depth
WB2782 - 300kg Rated Capacity, 36kg Walk Board Mass, 2.7m Walk Board Length, 820mm Walk Board Width, 75mm Walk Board Depth
WB3572 - 300kg Rated Capacity, 41kg Walk Board Mass, 3.5m Walk Board Length, 720mm Walk Board Width, 75mm Walk Board Depth
WB3579 - 300kg Rated Capacity, 44kg Walk Board Mass, 3.5m Walk Board Length, 790mm Walk Board Width, 75mm Walk Board Depth
WB3582 - 300kg Rated Capacity, 45kg Walk Board Mass, 3.5m Walk Board Length, 820mm Walk Board Width, 75mm Walk Board Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.5M, 300KG CAPACITY (79CM WIDTH) CLIMAXX WALK BOARD SERIES LOADING RAMP

Made in Australia. Suitable for many applications, from tree watering to fire-fighting and much more.
Features:
- Quality trusted pump Loncin powered Miniblaze pump
- 166 LPM @ zero head
- Easily attach to any flat surface such as a ute tray provision for strap or pin mounting
- Wear pads allow airflow and protect ute tray
- Integrally mounted pump saves tray space
- Adjustable nozzle with 12m of hose as standard
- Versatile and lightweight
Dimensions: 1,680 L x 750 W x 600 H
Capacity: 400 L
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 400L FIRE FIGHTING UNIT (2.5HP PUMP)

Battery Box Only - to suit Murray Quick-Run Engine Test Stand. A specially created product by Hugh Murray & Son for the automotive enthusiast.
Weight = 2kg.
Options for Quick Run test stand:
Fuel Tank with Primer Bulb
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MURRAY BATTERY BOX (ONLY) FOR QUICK-RUN ENGINE TEST STAND

A Smooth Rust Resistant Capping.
Looking for a smooth finish for your round fence post? Our round post caps will stop water getting in and corroding your steel posts.
Our post caps stop water and spiders from getting into your posts. Just put them on top of your post and hammer them on with a rubber mallet. Its that simple.
Each galvabond round post cap is made from quality steel to ensure a long lasting and strong cap.
Each cap has little ridges on the inside, which means once the cap is on, it wont come off.
What is A Galvabond Finish?
Wondering what a galvabond finish is? What's the difference between a galvanised cap versus a galvabond cap?
A galvanised product, is when the product is made then hot dipped galvanised.
A galvabond cap is created when we get a pre-galvanised sheet and punch the cap out. This creates a lot smoother finish, yet still remains corrosion resistant.
Price quoted is for one item only.
Discounts apply for bulk purchases of 5+
Specifications:
- 65NB
- 76mm Post O.D
- Galvabond
Features:
- Smooth finish
- Won't come off
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL 65NB ROUND POST CAP SUIT (76MM POST O.D) - RPC065

The Mower Series along with the ATV Series are a recent introduction to the Climaxx ramp range. Ideal for Government Departments, Maintenance Contractors, and serious Domestic users.
Featuring impressively low weights whilst maintaining SureWelds full level of quality, these versatile models are the solution to a need for dependable light duty Ramps in keeping with the expectations of Australian operators.
Mower Series ramps are curved for low clearance applications in comparison with the ATV Series which are of straight design. They are available as rigid (Model: 6/04521ATV) or with a folding section (Models: 6/04521ATVF, 6/042521LCF) for ease of transport.
A distinctive feature of these Ramps is their adaptability to varying loading heights and bearing surfaces.
Suitable for use with lightweight machinery such as Ride-on Mowers. Suitable for use with pneumatic tyres. Not suitable for use with steel tracks. Not suitable for use with solid tyres.
SureWeld are a leading supplier of Australian Made quality Aluminium Loading Ramps.
Specifications:
Rated Capacity: 450kg
Ramp Mass: 6kg
Ramp Length: 2.1m
Folded Length: 1.4m
Overall Width: 275mm
Internal Width: 240mm
Features:
Foot adaptable to varying gradients.
Tread Surface of Mower Series Ramps.
Hook or Steel Pin Connection.
Models:
6/04521ATV - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, N/A Folded length, 275mm Overall Width, 240mm Internal Width.
6/04521ATVF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
6/042521LCF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
*The 6/042521LCF is curved for low clearance applications such as loading of ride-on mowers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2.1M FOLDING CLIMAXX LOADING RAMP FOR ATV

Rata Double Mole Ploughs - Made in New Zealand
Rata Hydraulic Double Mole Ploughs are designed for fast, efficient subsoil drainage where a suitable clay subsoil is found.
Leaving a very clean entry and exit from the ground, the fully floating headstock with long double bar RHS frames allow for smooth ground contour following. Creating a stronger and longer lasting mole drain.
Double Mole Ploughs are ideal for those who need to install mole drains at twice the efficiency of a single mole plough.
Double Mole Ploughs are equipped with the Quickleg blade.
450mm working depth
Hydraulic blade actuation makes adjusting the mole plough easy via hydraulic ram with additional manual blade depth adjustment.
The Quickleg blade design is a standard feature on Rata Mole Ploughs. Quickleg blades remove the need for pasture pre-cutters due to its unique self cleaning design. This enables you to mole plough faster and turn corners.
The mole drain is created by a 75mm cast and hardened plug. This mole plug has the ability to revolve and float which ensures even wearing and allows it to follow natural contours of the ground.
The leading edge of the Mole Plough is a cast Ni-hard winged point. Being cast Ni-hard ensures high wear resistance in abrasive soils while the point wings help get & keep the leg and plug into the ground.
Featuring a heavy duty twin RHS box section frame with extensive gusseting and bracing. This twin RHS frame prevents twisting and flex while in the ground as found with other mole plough types.
All grease points are located in easy to access areas to ensure that maintenance is fast and trouble free.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

RATA DOUBLE MOLE PLOUGH (HYDRAULIC ACCESS MODEL)

No corners have been cut in their construction. They are built to serve and built to last.
Farm Aid dolomite/fertilizer droppers are entirely Australian products, designed and manufactured by our team here in Coopers Plains from Australian Materials.
Features:
3 Point Linkage mount.
Ground wheel drive.
Adjustable hole openings and agitator to ensure free flow of fertilizer and lime.
Models:
FA850 3ft Hopper (Mini) Capacity (50kg bags) 4-6 Bags
FA851 4ft Hopper (Junior) Capacity (50kg bags) 9-10 Bags
FA852 6ft Hopper (Standard) Capacity (50kg bags) 14-15 Bags
FA853 8ft Hopper (Large) Capacity (50kg bags) 18-20 Bags
FA854 10ft Hopper (Extra Large) Capacity (50kg bags) 20-25 Bags
Drawbar Only to suit above models
Optional trailing models available to order.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID DOLOMITE / FERTILIZER DROPPER - 6FT - FARM AID - FA852

A simple solution to the rattles.
Sick and tired of a loose rattling gate?
Our galvanised saddle attachments work with your top saddle to ensure a nice tight clean swinging gate.
Price quoted is for one attachment only.
Discounts apply for bulk purchases of 10+
Specifications:
- 20NB gate
- 1 x saddle attachment to suit TS20HD
- Galvanised
Features:
- Strong
- Provides a clean swinging gate
- Rust resistant
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL SADDLE ATTACHMENT 20NB (SUIT TS20HD) - SA20

Silvan 102 General Purpose Slasher - 1.5m (5ft)
Suit 30-40 HP. 102RS5
Ideally suited to clearing paddocks, fields and private roadsides where general cutting is required with a low HP tractor.
Features:
- Construction: 3mm top deck plate, downfolds front and rear, steel understructure.
- Gearbox: 40HP, 540RPM, 1:1.93 ratio.
- PTO Shaft Rating: 40HP, series 4 with integral clutch.
- Head Stock: Collapsible floating hitch.
- Clutch: Adjustable friction clutch with 2 x 150mm (6in) clutch plates.
- Finish: Premium quality powder coating.
- Skids: Adjustable from 50 90mm cutting height.
- Blades: 3 leaf rotor bar with hardened bushes and 2 Boron step down blades.
- Mounting: Cat I TPL attachment with offset or centre mount.
- Instructions: Operators manual and holder supplied.
- Safety Guards: Front & rear rubber guards.
Specifications:
- Market: Turf, Ag Lifestyle
- Connection Type: Linkage
- Min PTO HP: 30-40 HP
- Working Width (mm): 1500
- Product Weight (kg): 258
Options:
- Height Control Wheel
- Over-run Clutch
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

SILVAN 1.5M 102 GENERAL PURPOSE SLASHER (SUIT 30-40HP)

Find Farm Machinery For Sale in Coopers Plains. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

RAPID SPRAY 57L RAPIDMIX SPRAYER

JOHN BERENDS RM75 HD TRAILING OFFSET 20 PLATE 5MM DISCS - 0831, SUIT 60-130HP

SUREWELD 3.6M, 6,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

SUREWELD 3.5M, 300KG CAPACITY (79CM WIDTH) CLIMAXX WALK BOARD SERIES LOADING RAMP

POLYMASTER 400L FIRE FIGHTING UNIT (2.5HP PUMP)

MURRAY BATTERY BOX (ONLY) FOR QUICK-RUN ENGINE TEST STAND

ROTECH RURAL 65NB ROUND POST CAP SUIT (76MM POST O.D) - RPC065

SUREWELD 2.1M FOLDING CLIMAXX LOADING RAMP FOR ATV

RATA DOUBLE MOLE PLOUGH (HYDRAULIC ACCESS MODEL)

FARM-AID DOLOMITE / FERTILIZER DROPPER - 6FT - FARM AID - FA852

ROTECH RURAL SADDLE ATTACHMENT 20NB (SUIT TS20HD) - SA20

SILVAN 1.5M 102 GENERAL PURPOSE SLASHER (SUIT 30-40HP)

Farm Supplies Machinery & Equipment

Dealer Address