Farm Supplies Machinery & Equipment

Sliding Tine Fork - 60+ HP range.

The sliding tine pallet fork allows the pallet tines to slide effortlessly across the bar and can be adjusted indefinitely to suit requirements. 

The safety locking system is introduced to ensure maximum safety during operation.

The pallet forks are manufactured to suit most loaders as well as customised to suit individual loaders. 

The fork tines are extremely durable as it is made of heavy duty forged steel tines.

Burder quick change hooks are standard and other mounts are available upon request.

Specifications:

- Hp Range:60+
- Rated Capacity (kg): 1000
- Dimensions LxWxH (mm): 1200x1255x750
- Weight (kg): 250

BURDER SLIDING TINE FORKS (60+ HP) - 1000KG CAPACITY

Southern Cross 6ft Galvanised Slasher - suit 50-100hp.
Clear vegetation such as grass, weeds, scrub, brush and saplings. Reduce the need for excess chemicals through natural weed control.
Optional wheel kits available (two wheel kits are recommended for the 6ft slasher)
Bare-Co components are readily available from all good machinery dealer outlets located Australia wide
Key Features:
- Built for Australian Conditions
- Australian Slasher Health and Safety Standards Compliant
- Hot dipped galvanised body
- 5mm deck
- Height adjustable skids with five different cuttings heights
- Bare-Co 100HP gearbox. Gearbox supplied with oil (85/140
Gear Oil).
- 3 Year Gearbox Warranty
- Bare-Co 8 inch slip clutch
- Bare-Co Series 8 PTO shaft
- Front and rear discharge deflectors
- High tensile drag chain mounting system for durability
- Clear decks for easy maintenance
- Double plate gearbox mount
- Structural integrity located under deck with no impact on
material flow
- Bare-Co gearbox/slip clutch safety guarding
- Reinforced A-frame for strength and functionality
- Cutter bar blade carrier system (Bare-Co Blades B6002)
- Optional wheel kits available (two-wheel kits are
recommended for the 6ft slasher)
Specifications:
- Recommended Tractor (HP) - 50-100
- Cutting Width (mm) - 1750
- Overall Width (mm) - 1870
- Cutting Height (mm) - 42-167
- Number of Blades - 2
- Blade Size (mm) - Bare-Co B6002
- Blade Tip Speed (m/s max.) - 90
- Deck Thickness (mm) - 5.0
- 3-Point Hitch - Category One
- Gear Box / Capacity - Bare-Co 1:1.93/100HP
- Bare-Co 8 inch 100HP slipclutch & series 8 PTO shaft
- Grass Discharge - Rear Discharge
- Blade Carrier System - Cutter bar
- Optional Wheel Kit(s) - Twin kit available
- Offset - Left & right
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOUTHERN CROSS AG MACHINERY 6FT GALVANISED SLASHER, SUIT 50-100HP

4 in 1 Bucket 8000 series - 1.80m. Includes Log Teeth as standard.

The 4 IN 1 bucket has many advantages over the standard bucket:

Features: 

- Allows the operator to open the bucket to release material instead of dumping the material.
- When the bucket is opened, the exposed blades on the rear and front end of the bucket can be used for earthmoving activities.
- Allows the clamping of objects and is ideal for picking items like broken branches.

Specifications:

- Width (m): 1.80m 	
- HP Range: 50-100
- Struck Capacity (m3): 0.38
- Rated Capacity (m3): 0.47
- Dimensions LxWxH (mm):
- Weight (kg): 430

BURDER 4 IN 1 BUCKET 8000 SERIES 1.80M - 50-100HP RANGE

Swinging Drawbar Hinge Pin.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX SWINGING DRAWBAR HINGE PIN (19MM PIN DIA, 336MM WORKING LENGTH)

LCD Readout (+/- 2% accuracy) to suit telehandler and wheeled loader - Dinamica Generale Pegasus.* Optional thermal printer available.
* Please allow 3-4 hours shop time for fitting. Dealer may need to supply additional fittings, etc.

Features:
- Single button control
- Audible alarm, displays live weight
- Pressure sensor
- Mounting bracket - mounts in any position
- Cabling and hardware
Options:
- Thermal printer
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

BURDER LCD READOUT (+/- 2% ACCURACY) TO SUIT TELEHANDLER & WHEELED LOADER

Hexagonal Head Bolt With Nut specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX HEXAGONAL HEAD BOLT WITH NUT (TH) - M12 X 45MM

Levelling Fork.
Suits tractor models shown in images.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX LEVELLING FORK (410MM TOTAL LENGTH)

YELLOW - Low Flow, 80° Flat Spray Nozzle.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOLO YELLOW - LOW FLOW 80° FLAT SPRAY NOZZLE

Front or Rear Mounting for Tractors up to 90HP.
Ideal for wineries and orchards. Extremely Slim Design with Overall Width exceeding no more than 8cm of Working Width.
Features:
Manufactured from High Quality QSt/E Steel with multi position headstock Cat. I + II for front and rear mounting.
Rear mounting with mechanical side shift; MU-O 180 250 Vario: 56 cm.
Gearbox with integrated over run clutch and through drive for 540 / 1.000 RPM.
Belt protection with tension measuring slot.
High tempered M Hammer flails to ensure clean cut and maximum shredding using less power.
Spiral Rotor with specially formed flail lugs to protect against damage from obstacles, bearings protected against dirt, wear and tear.
Patented removable shredding bar System: Shark fin.
Support roller to carry the flail, adjustable for different heights of the mulching system, with Roller Bearing Starinth.
High tempered spring steel one way protection flaps in front of the mower hood.
Optimised distance between the outer rotor circle and the support roller guarantees perfect contour following and an even quality of cut.
Spreads the shredded material evenly behind the support roller.
Excellent Mulching Quality.
Side skids.
PTO shaft with hardened inner pipe and cap bottom lubrication.
Options:
Front or rear headstock shiftable - additional charge.
Lower link extension suitable for Cat. 1+2.
Hydraulic side shift (56cm lifting range).
Shock Absorbing Linkage Springs (For Front Mount Recommended).
MU-SOFA weight transfer system, recommended for front-mounted machines.
Double free wheel gear box for PTO rotational direction.
Modification of r.p.m. / rotation direction.
Adjustable cutting bar.
Second Patented removable shredding bar system: "Shark Fin".
Hood Wear Plate (factory mounted).
Wear runners 6mm, special fruit-growing version.
Beam with Rakes.
Model:
MU-O 180 1800mm 100 HP WW 1800mm Overall width 1970mm Weight 660kg Flails 16
MU-O 200 2000mm 100 HP WW 2000mm Overall width 2170mm Weight 690kg Flails 16
MU-O 220 2200mm 100 HP WW 2200mm Overall width 2370mm Weight 760kg Flails 18
MU-O 250 2500mm 100HP WW 2500mm Overall width 2670mm Weight 810kg Flails 22
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MUTHING MU-O 250 MULCHER FRONT OR REAR MOUNTING

4 in 1 Bucket 6000 series - 1.65m

The 4 IN 1 bucket has many advantages over the standard bucket:

Features: 

- Allows the operator to open the bucket to release material instead of dumping the material.
- When the bucket is opened, the exposed blades on the rear and front end of the bucket can be used for earthmoving activities.
- Allows the clamping of objects and is ideal for picking items like broken branches.

Specifications:

- Width (m): 1.65m 	
- HP Range: 40-60	
- Struck Capacity (m3): 0.20
- Rated Capacity (m3): 0.26
- Dimensions LxWxH (mm): 1710X640X550
- Weight (kg): 230

BURDER 4 IN 1 BUCKET 6000 SERIES 1.65M - 40-60 HP RANGE

Manual Top Link.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK HEAVY DUTY (CAT 2/2) (555MM MIN LENGTH, 790MM MAX LENGTH)

Rectangular Head Bolt with Nut. Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX RECTANGULAR HEAD BOLT WITH NUT - M12 X 60MM

Find Farm Machinery For Sale in Coopers Plains. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

BURDER SLIDING TINE FORKS (60+ HP) - 1000KG CAPACITY

SOUTHERN CROSS AG MACHINERY 6FT GALVANISED SLASHER, SUIT 50-100HP

BURDER 4 IN 1 BUCKET 8000 SERIES 1.80M - 50-100HP RANGE

SPAREX SWINGING DRAWBAR HINGE PIN (19MM PIN DIA, 336MM WORKING LENGTH)

BURDER LCD READOUT (+/- 2% ACCURACY) TO SUIT TELEHANDLER & WHEELED LOADER

SPAREX HEXAGONAL HEAD BOLT WITH NUT (TH) - M12 X 45MM

SPAREX LEVELLING FORK (410MM TOTAL LENGTH)

SOLO YELLOW - LOW FLOW 80° FLAT SPRAY NOZZLE

MUTHING MU-O 250 MULCHER FRONT OR REAR MOUNTING

BURDER 4 IN 1 BUCKET 6000 SERIES 1.65M - 40-60 HP RANGE

SPAREX TOP LINK HEAVY DUTY (CAT 2/2) (555MM MIN LENGTH, 790MM MAX LENGTH)

SPAREX RECTANGULAR HEAD BOLT WITH NUT - M12 X 60MM

Farm Supplies Machinery & Equipment

Dealer Address