Farm Supplies Machinery & Equipment

The direct drive auger motor is fast and has about 400NM of torque. Operates with its own ram, allowing optimal down pressure and lift. (Not able to extract old posts). 

This auger motor can also be mounted to the RSE by using the RSE adaptor. Great operation to consider if you are battling in hard or dense clays. Able to drill up to 1200mm deep (can drill deeper on request).


All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information

Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FENCE-PRO STANDARD AUGER MOTOR - 75MM / 3 INCH AUGER (EARTH OR TUGSTEN PILOT)

- 1 1/2" Filter Assembly with 50 mesh Element.
- 14 Bar / 210 psi maximum pressure rating.
- BSPT female inlet / outlet - Polypropylene construction.
Colour = Blue
Flow Rate up to 291 L/min
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 1 1/2" FLUSH-OUT LINE STRAINERS (50 MESH)

The SGH120 Aervator is a high utility farm implement that relieves compaction, aerates, cultivates and renovates. It can function as a rotary hoe, a disc, a roller and a harrow and increases the effectiveness of water and fertilizer.
The Aervator has a low maintenance cost and saves you both fuel and time.
Product Features:
Heavy wall 100mm RHS Galvanized frame!
Heavy duty double sealed bearings housed on the inside for protection.
Utilizing the original SUPER TINE©
Cat 1-2 pick up.
Rear tow hitch great for trailing Harrows!
Gang angle adjustable from 0-5 degrees
Built in weight trays.
Custom gang adjusting spanner supplied
Min HP Required 25HP.
Equipment Options:
Trailing kits for all models
Hard facing tine option
Hydraulic folding wings
Removable concrete weights
Turf tines
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

AERVATOR SGH SERIES 1.2M SGH120. MIN 25+HP

Premium and quality: Pressure sprayer that serves as the right tool for professionals. This unit is characterised by its robustness, practically-indestructible tank, and long service life.
Sample Applications:
Plant protection
In larger private gardens
For decorative plants, shrubs and plantations
Weed control
Cleaning
Pest control
Trade applications
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SOLO 9L MANUAL PRESSURE SPRAYER

Daken Flail mowers/mulchers are designed and built for light mulching. Suitable for light application on lawns and improved ground, standard with hammer type blades and rear roller.
Not recommended for clearing unimproved ground or medium to heavy growth.
Specifications:
Cut: 115cm
Blades: Hammer
Rear roller: yes
Skids: yes
Offset: manual
Weight: 178kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN 115CM FLAIL MULCHER - 40007DC

Drive Belt.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX AGRIBELT DRIVE BELT - SUITS SOME CASE IH MODELS

Sliding Tine Fork - 60+ HP range.

The sliding tine pallet fork allows the pallet tines to slide effortlessly across the bar and can be adjusted indefinitely to suit requirements. 

The safety locking system is introduced to ensure maximum safety during operation.

The pallet forks are manufactured to suit most loaders as well as customised to suit individual loaders. 

The fork tines are extremely durable as it is made of heavy duty forged steel tines.

Burder quick change hooks are standard and other mounts are available upon request.

Specifications:

- Hp Range:60+
- Rated Capacity (kg): 1000
- Dimensions LxWxH (mm): 1200x1255x750
- Weight (kg): 250

BURDER SLIDING TINE FORKS (60+ HP) - 1000KG CAPACITY

Pick Up Tine.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GRANGE & WALTER PICK-UP TINE - 170MM LENGTH, 66MM WIDTH (REPLACEMENT FOR VICON, CASE IH)

Electric Start.
This is the popular choice for farmers and builders when an economical and hardworking power source is needed to produce lots of watts (e.g. small air conditioners and cut-off saws).
This Gentech EP5900HSR Model is a versatile and tough genset popular with farmers, builders and other professional contractors. Powered by a GX340 Honda engine (which comes with a 3 year warranty), you get running power of 4700 watts and peak power of 5.9kVA. Designed to run your small to medium tools such as drills and saws as well as appliances like pumps and air-conditioners for satellite offices etc.
Protected by a steel rollover frame, two 15 amp outlets and a 6.5 litre fuel tank. Optional Extras include; long range fuel tank, earth leakage protection, wheel & handle kit, lifting bar, and electric start.
Complete with a 2 year generator warranty and backed by a comprehensive national service network. The Honda engine comes with a 4 year warranty.
Specifications:
Power Rating: 5.9 kVA
Model Rating 0.8pf @ 50Hz: 5.9 kVA
Alternator Rating: 6 kVA
Engine Model: Honda GX340
Phase: 1-Phase
Starting System: Recoil
Fuel Tank Capacity: 6.5 L
Noise Level @ 7m: 68 dBA
Outlets: Double GPO 15 Amp
Volts: 230 V
Approx. Fuel Consumption @ 80% Load: 2.50 L/hr
Operation Hours @ 80% Load: 2.60 hrs
Fuel Type: Petrol
Diam.: 735 x 545 x 545 mm (L x W x H)
Weight: 70 kg
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 5.9 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

Male Thread = 3/4" BSP
Suit Hose size (ID) of 13 mm
Maintaining a leak free and smooth liquid flow by using quality components and fittings is essential for maximum performance from all installations.
Selectas range of fittings are manufactured from high quality polypropylene and are compatible with fungicides, herbicides, chemical fertilisers etc, and will withstand temperatures of up to 100ºC.
Standard BSP male and female threads can be used in conjunction with each other to construct assorted types and sizes of inlets, outlets, suction fittings and hose unions or they can be used with standard brass, galvanised and other fittings.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3/4" MALE THREAD BSP (SUIT 13 MM HOSE)

Manual Top Link.
Specifications shown in images.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SPAREX TOP LINK HEAVY DUTY (CAT 2/2) (635MM MIN LENGTH, 895MM MAX LENGTH)

RCD PACK -3.4 kVA portable generator powered by Honda petrol engine. Featuring Worksafe aproved RCD protected outlets.
Newly designed frame
2 x 15 Amp IP56 RCD protected outlets
With these features, using your gentech generator on a work site will be a breeze. The RCD protected outlets are work safe approved and comply with Australian Standards. This hard working, light weight generator is ideal for small appliances (e.g. TVs, bar fridges) and small hand tools (e.g. drills and jigsaws).
Specifications:
Power Rating: 3.4 kVA
Model Rating 0.8pf @ 50Hz: 3.4kVA
Engine Model: Honda GX200
Phase: 1-Phase
Starting System: Recoil
Noise Level @ 7m: 67 dBA
Outlets: RCD protected 15Amp
Approx. Fuel Consumption @ 80% Load: 1.34 L/hr
Operation Hours @ 80% Load: 2.32 hrs
Optional Extras:
80-GPO-RCD-15A-3PIN-PORT - (RCD) earth leakage protection (IP56), 15amp circuit breaker. 2 x outlets. Suits units up to 3.5kVA.
80-GPO-RCD-20A-3PIN-PORT - (RCD) earth leakage protection (IP56), 20amp circuit breaker. 2 x outlets. Suits units up to 6.0kVA.
80-GPO-RCD-32A-3PIN-PORT - (RCD) earth leakage protection (IP56), 32amp circuit breaker. 2 x outlets. Suits units up to 9.5kVA.
10-N3-WK203-009 - Wheel kit. 2 wheels and 2 axles per kit. Suitable for 2.8-8 kVA models excluding all diesel gensets. For 9.5kVA and above use part number 10-N8-WK203-009.
WHEELBARROWKIT - Wheel barrow kit. 2 handles / 2 levelling feet. note: handle kit requires wheel kit.
10-N8-WK203-009 - 2 axles and 4 wheels for large long range base tank. suits EP9500HSRE and above excluding diesels.
10-GN-NO1-065 - Lifting bar kit to suit 2kVA and 3.4kVA sets
10-GN-NO3-065 - Lifting bar kit to suit 4.4kVA, 5.9kVA, 7kVA and 8kVA sets.
10-N3-LRT-009 - 25L long range tank with centre point lifting suits 4.4kVA and above, excluding Yamaha models, welder/generators, diesel models.
R/S-12V-PORT - Remote start 2 wire - electric start models only. Not available on EP5900HSRE.
80-GPO-RCD-15A-3PIN-3GANG - 3 x 15 amp single phase outlets each with individual RCD circuit breakers.
Solar Panel Kit - To suit electric start generators to keep your batteries charged.
10-N1-LRT-009 - Long range fuel tank 8.5L. Suits EP3400HSR.
Generator Dust Covers:
COVER-SML - Cover to suit generators up to 3.6kVA
COVER-LRG - Cover to suit 4.4kVA to 8kVA petrol generators, 7kVA welders, and 4.4kVA to 7kVA diesel generators.
Battery Chargers:
RAPID 400 - Input: 600w, 240v. Output: 22amp charging, 250 cold crank boost (suitable for starting most cars & small tractors)
PROGRESS 20 - Input: 300w, 240v. Output: 14amp charging.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

GENTECH 3.4 KVA RCD PETROL GENERATOR

Find Farm Machinery For Sale in Coopers Plains. Browse 7604 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

FENCE-PRO STANDARD AUGER MOTOR - 75MM / 3 INCH AUGER (EARTH OR TUGSTEN PILOT)

SILVAN 1 1/2" FLUSH-OUT LINE STRAINERS (50 MESH)

AERVATOR SGH SERIES 1.2M SGH120. MIN 25+HP

SOLO 9L MANUAL PRESSURE SPRAYER

DAKEN 115CM FLAIL MULCHER - 40007DC

SPAREX AGRIBELT DRIVE BELT - SUITS SOME CASE IH MODELS

BURDER SLIDING TINE FORKS (60+ HP) - 1000KG CAPACITY

GRANGE & WALTER PICK-UP TINE - 170MM LENGTH, 66MM WIDTH (REPLACEMENT FOR VICON, CASE IH)

GENTECH 5.9 KVA PETROL GENERATOR (ELECTRIC START - 240V ENGINE POWERED)

SILVAN 3/4" MALE THREAD BSP (SUIT 13 MM HOSE)

SPAREX TOP LINK HEAVY DUTY (CAT 2/2) (635MM MIN LENGTH, 895MM MAX LENGTH)

GENTECH 3.4 KVA RCD PETROL GENERATOR

Farm Supplies Machinery & Equipment

Dealer Address