Farm Supplies Machinery & Equipment

A robust harrow ideal for pasture renovation, landscaping, horse arenas, race tracks, sports fields and for seed/fertiliser incorporation.
Features:
12mm scarifier tines break up manure, loosens hard surfaces and increases aeration which in turn stimulates new growth.
12mm rear smudger bars spread manure and help level the ground.
Simple flexible design follows the ground contours without tangling up.
Self cleaning flexible action.
Trailing design with sturdy 100×50 channel iron draw bar and 12mm towing chain.
Trailing weights 4 on 8ft (2.4m)
Optional lifting frame available for easy transporting.
Very low maintenance.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 8FT PASTURE HARROWS - 0403

Note: This model does not include a crumbler, however, it is available as an option. The second picture of this listing shows the cultivator with a crumbler.
Features:
Standard model features a 50×12 flat frame with 50×50 RHS perimeter frame. The flat section frame allows more vibration through out the machine giving a better cultivating effect.
Adjustable headstock allows machine to be offset for closer cultivation near fences, trees, vines etc.
Four bar assembly allows approx 400mm (16') tine clearance which is extremely important in preventing trash build up.
Optional crumbler roller breaks down clods and also controls cultivation depth.
Please note the actual width of the machine is 125mm wider than the working width, and the optional wheel kit adds an additional 500mm.
Specifications:
No of Tines: 36
Tine Size: 32mm x 10mm
Frame Size: 50mm x 12mm Flat
Tractor HP Guide: 2HP per tine
Headstock: 3 Point Linkage Cat 1/2
Options:
Pair Pneumatic Depth Wheels
3.6m Crumbler
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS 3.6M S-TINE (36 TINES) STANDARD CULTIVATOR - MIN 72HP

The Mower Series along with the ATV Series are a recent introduction to the Climaxx ramp range. Ideal for Government Departments, Maintenance Contractors, and serious Domestic users.
Featuring impressively low weights whilst maintaining SureWelds full level of quality, these versatile models are the solution to a need for dependable light duty Ramps in keeping with the expectations of Australian operators.
Mower Series ramps are curved for low clearance applications in comparison with the ATV Series which are of straight design. They are available as rigid (Model: 6/04521ATV) or with a folding section (Models: 6/04521ATVF, 6/042521LCF) for ease of transport.
A distinctive feature of these Ramps is their adaptability to varying loading heights and bearing surfaces.
Suitable for use with lightweight machinery such as Ride-on Mowers. Suitable for use with pneumatic tyres. Not suitable for use with steel tracks. Not suitable for use with solid tyres.
SureWeld are a leading supplier of Australian Made quality Aluminium Loading Ramps.
Specifications:
Rated Capacity: 450kg
Ramp Mass: 6kg
Ramp Length: 2.1m
Folded Length: 1.4m
Overall Width: 275mm
Internal Width: 240mm
Features:
Foot adaptable to varying gradients.
Tread Surface of Mower Series Ramps.
Hook or Steel Pin Connection.
Models:
6/04521ATV - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, N/A Folded length, 275mm Overall Width, 240mm Internal Width.
6/04521ATVF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
6/042521LCF - 450kg Rated Capacity, 6kg Ramp Mass, 2.1m Ramp Length, 1.4m Folded length, 275mm Overall Width, 240mm Internal Width.
*The 6/042521LCF is curved for low clearance applications such as loading of ride-on mowers.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2.1M FOLDING CLIMAXX LOADING RAMP FOR ATV

A premium heavy duty cam latch.
Looking for strong, durable, and long lasting latch for your cattle yard?
Also, known as a cam latch, each slam latch is designed to hold up against heavier punishment often found in cattle yards.
A Premium Multi-Positional Cam Latch.
Each 20mm latch is made from a zinc plated steel, carbon steel rolled pins, and stainless steel springs. The cams are made from hollow bar for high precision. The pin is made from bright bar for a stronger latch.
This results in a high quality, strong latch with no excess movement.
We provide you with two different pin length options. The compact 50mm option and the 100mm option if you want your bolt to travel through the gate frame.
Each latch is available with an open or enclosed handle (which is perfect if you dont want your hand to continuously slip off the handle).
No Jiggling Around!
The precise design of these latches means you get a nice tight fit.
No more loose latches.
Price quoted is for one item.
Discounts apply for bulk kit purchases of 10+ & 20+
Contact dealer for bulk pricing.
Specifications:
- 100mm pin stick out
- 270mm overall length
- Enclosed handle
- Left or right position
- Zinc plated
Features:
- Strong
- Easy to install
- Long lasting
- No excess movement
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

ROTECH RURAL 20MM ENCLOSED HANDLE LONG PIN CAM LATCH (MULTIPOSITIONAL) - ECL20L

The Rollmaxx SW2000C, SW2000, SW2400EC and SW2400E models are designed for transportation of Mini Excavators.
These compact Trailers maintain impressively low tare weights, yet are still wide enough to accommodate most excavators with operating weights up to 2,000kg.
The SW2000C and SW2000 Trailer give operators the advantage of towing equipment up to 1,900kg in weight, without the legal requirement for an electric brake system. These have a special application in the Hire Industry.
The SW2400EC and SW2400E Trailer, with its Electric Brakes and Break-away System, give even greater versatility, making it possible to carry up to 2,065kg with an Aggregate Trailer Mass [A.T.M] of only 2,400kg.
The SW3500ER, which is also included with Mini Loader Trailers, allows 2,850kg of equipment to be towed with an Aggregate Trailer Mass [A.T.M] of just 3,500kg.
The SW4100ER, which is also included with Mini Loader Trailers, allows 3,450kg of equipment to be towed with an [A.T.M] of just 4,100kg.
Specifications:
Aggregate Trailer Mass: 3,500kg
Allowable Payload: 2,850kg
Tare Weight: 620kg
Deck Width: 1,800mm
Deck Length: 2,600mm
Bucket Rest Length: 1,100mm
Total Trailer Length: 5,200mm
Features:
Aluminium Deck Construction
Top Quality Components including LED Lights
Hinged Aluminium Ramps
Robust Steel Mudguards, double coated in a Choice of Colours
HDPE Buffers on Bucket Rest area.
Options:
JCH2435 - Lockable Jerry Can Holder
LRK2435 - Load Restraint Kit
TC70 - Tow Coupling 70mm (non-standard)
TB70 - Tow Ball 70mm (non-standard)
WTU14 - Upgrade to 14" Alloy Wheels
WTU16 - Upgrade to 16" Alloy Wheels
WTS13 - Wheel & Tyre, Spare, 13" Steel (Supply only)
WTS14 - Wheel & Tyre, Spare, 14" Steel (Supply only)
WTS15 - Wheel & Tyre, Spare, 15" Steel (Supply only)
WTS16 - Wheel & Tyre, Spare, 16" Steel (Supply only)
WTA14 - Wheel & Tyre, Spare, 14" Alloy (Supply only)
WTA16 - Wheel & Tyre, Spare, 16" Alloy (Supply only)
WM1416 - Spare Wheel Mount
AM2435 - Auger Stands
RPU2435 - Roller Package Upgrade
Models:
SW2000C - 2,200kg Aggregate Trailer Mass, 1,900kg Allowable Payload, 280kg Tare Weight, 1,100mm Deck Width, 1,900mm Deck Length, 1,400mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW2000 - 2,200kg Aggregate Trailer Mass, 1,860kg Allowable Payload, 340kg Tare Weight, 1,310mm Deck Width, 1,900mm Deck Length, 1,400mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW2400EC - 2,400kg Aggregate Trailer Mass, 2,060kg Allowable Payload, 340kg Tare Weight, 1,100mm Deck Width, 1,900mm Deck Length, 1,400mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW2400E - 2,400kg Aggregate Trailer Mass, 2,020kg Allowable Payload, 380kg Tare Weight, 1,310mm Deck Width, 1,900mm Deck Length, 1,400mm Bucket Rest Length, 4,700mm Total Trailer Length.
SW3500ER - 3,500kg Aggregate Trailer Mass, 2,850kg Allowable Payload, 620kg Tare Weight, 1,800mm Deck Width, 2,600mm Deck Length, 1,100mm Bucket Rest Length, 5,200mm Total Trailer Length.
SW4100ER - 4,100kg Aggregate Trailer Mass, 3,450kg Allowable Payload, 620kg Tare Weight, 1,800mm Deck Width, 2,600mm Deck Length, 1,100mm Bucket Rest Length, 5,200mm Total Trailer Length.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 2,850KG PAYLOAD MINI EXCAVATOR TRAILER WITH 3,500KG A.T.M AND 620KG TARE

Specifications:
Market: Viticulture.
Tank Size = 3,500 L
Connection Type: Trailed
Rows = 3
Min PTO hp: 80
Pump Size : 500+ LPM
Application: Vineyards
Dimensions - Length measured with linkage hitch:
Length: 5,640 mm
Width Less Head: 1,935 mm
Width Folded: 2,605 mm
Height: 3,630 mm
Weight 1,100 kg (Dry)
Includes spray heads, independent 320mm hydraulic fans, hydraulic drive stainless steel pump, automatic spray rate controller, self contained hydraulic drive system and tandem suspension axle. Ideal for vineyards.
Model Specifications
- Head Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Left and right arms are independent hydraulic folding with adjustable width and centre frame. Boom frame is galvanised.
- Pump Multi-stage hydraulic drive pump, multiple impellers made with highly resistant engineering plastic for excellent chemical compatibility. 500+L/min. Driven by tractor remotes.
- Fan Size 320mm turbine fan, one per air tube, 3600rpm. Power consumed 29kw/38HP.
- Hydraulic Control Hitch mounted hydraulic power pack with: 40L oil reservoir with cartridge particulate filter, motors fitted with case drain, hydraulic distribution block incorporates anti-cavitation and pressure relief valves, 12V oil cooler.
- Nozzles Air shear.
- Controls Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
- Tank Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water hand wash tank.
- Frame Galvanised steel chassis, linkage hitch fitted with hydraulic power pack.
- Agitation Venturi agitator.
- Filtration Lid strainer and large capacity suction filter.
- Wheel Equipment Tandem suspension with 10x15inch wheels and tyres.
- PTO Driveshaft Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
- HP Required Minimum 60 PTO HP
Factory Options
- Hydraulic pump driven through power pack.
- Hydraulic Height Adjustment phased or independent.
- Hydraulic Row width adjustment phased or independent.
- Bravo 180S spray rate controller with hydraulic controls (in lieu) up to 5 sections.
- Bravo 180S spray rate controller with hydraulic controls (in lieu) 7 sections.
- Bravo 400S automatic rate controller with GPS guidance (in lieu) 7 spray sections.
- Bravo 400S automatic rate controller with hydraulic controls, GPS guidance (in lieu) 7 spray sections + 7 hydraulic sections.
- IBX 100 ISOBUS controller (in lieu requires compatible in-cab console).
- Delta 80 Universal Terminal to suit ISOBUS control.
- Quick turning hitch.
- Electric braked tandem suspension axle via trailer plug in lieu of standard axle.
- Hydraulic braked tandem suspension axle in lieu requires compatible tractor remotes.
- 100L Flush Tank
- Road Kit Brake and indicator lights with folding Oversize sign.
- Tail Light Kit Brake and indicator lights via trailer plug.
NOTE: Not all options will fit all models. Extra charges may apply to fitment of some options.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 3,500L (3 ROW) TRAILED SCRAM CROSS - MIN 80PTO HP

Great looking solutions for urban water conservation. These Slimline water tanks have been designed to hold the maximum volume of water for the minimum surface area used.
This 3,0000 L water tank comes with the Garden Water System (Garden Pump & Press Control in separate pump housing) to make your gardening easier.
Dimensions:
Capacity : 3,000 L
Length: 2570 mm
Width : 790 mm
Height: 2,050 mm
Features:
- Use stored rainwater on your garden.
- Place complete packaged pump unit beside your tank with garden tap attachment
- 40 LPM garden pump
- 240v power
- Automatic pressure controller (Start & Stop on demand)
- 2 year warranty on pump
- Colour matched pump cover to protect pump from the elements
- Space-saving modern design, ideal for tight spaces
- Hand grips for easy lifting
- Can be coupled to other tanks for even greater volume
- Available with submersible pump, packaged pump unit or garden pump systems
- Available in 22 Colorbond colours
Standard Fit Out:
Strainer Position: 6 o'clock
Outlet Standard Position: 6 o'clock
Overflow Position: 12 o'clock
Strainer Size: 400 mm
Outlet: 25 mm (brass)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

POLYMASTER 3,000L RAINWATER TANK & GARDEN PUMP (SLIMLINE)

The Rubber Series range of Climaxx Ramps are built for use with pneumatic [air filled] tyres, and Multi-Terrain Loader rubber tracks. The unique tread surface of this range has been designed to obtain the highest possible strength and the lightest possible weight, together with a smooth, safe ride.
Ideal for Earthmoving Contractors, Plant Hire Companies, Landscapers, Government Departments or any application where wheeled, and rubber tracked machinery must be transported safely and effectively.
Featuring the next lowest Ramp weights after the ATV Series & Mower Series whilst maintaining Surewelds full level of quality, select from this range where Ramp weights are critical and machinery with pneumatic tyres or rubber tracks is to be loaded.
Where steel tracks are to be used on Ramps, please refer to the T Series which have a different tread surface to the Rubber Series. Please see the table below, for SureWelds full range of Rubber Series Ramps.
Specifications:
Rated Capacity: 3,000kg
Ramp Mass: 27kg
Ramp Length: 3.3m
Track Width (internal): 300mm
Ramp Width: 400mm
Ramp Depth: 110mm
Features:
Tread Surface of Rubber Series Ramps.
Steel Pin Connection.
Foot adaptable to varying gradients.
Models:
6/1524R - 1,500kg Rated Capacity, 16kg Ramp Mass, 2.4m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/1533R - 1,500kg Rated Capacity, 22kg Ramp Mass, 3.3m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/1929R - 1,900kg Rated Capacity, 18kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 390mm Ramp Width, 90mm Ramp Depth
6/3016R - 3,000kg Rated Capacity, 12kg Ramp Mass, 1.6m Ramp Length, 350mm Track Width (internal), 440mm Ramp Width, 90mm Ramp Depth
7/3029R - 3,000kg Rated Capacity, 24kg Ramp Mass, 2.9m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3033R - 3,000kg Rated Capacity, 27kg Ramp Mass, 3.3m Ramp Length, 300mm Track Width (internal), 400mm Ramp Width, 110mm Ramp Depth
7/3635R - 3,600kg Rated Capacity, 33kg Ramp Mass, 3.5m Ramp Length, 350mm Track Width (internal), 450mm Ramp Width, 120mm Ramp Depth
7/4040R - 4,000kg Rated Capacity, 47kg Ramp Mass, 4.0m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4536R - 4,500kg Rated Capacity, 42kg Ramp Mass, 3.6m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/4833R - 4,800kg Rated Capacity, 39kg Ramp Mass, 3.3m Ramp Length, 400mm Track Width (internal), 510mm Ramp Width, 125mm Ramp Depth
7/6036PT - 6,000kg Rated Capacity, 52kg Ramp Mass, 3.6m Ramp Length, 500mm Track Width (internal), 600mm Ramp Width, 165mm Ramp Depth
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SUREWELD 3.3M, 3,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

100L capacity tank made from impact resistant polyethylene, UV stabilized.
Featuring a freestanding design with two wheels, making it easy to move to different locations and ideal for storing.
Specifications:
Tank Size (L): 100
Product Weight (kg): 19.5
Height / Width / Length (mm): 1050 / 530 / 340
Pump Specifications: 12 volt submersible pump, 15 L/min open flow
Pump Duty Cycle: 60 mins
Features:
- 100L UV stabilised Polytuff tank, with screw on lid and breather
- Flat-free PU wheels (245mm diameter)
- Hook to store the delivery hose
12V Model: SQDT100-1 (pictured)
- 12V submersible pump, 15L/min flow
- 2m delivery hose, manual aluminium trigger
- 2.2m power cord with alligator clips to connect to battery
Lever action model: SQT100-2
- Lever action pump, 0.5L per stroke
- 2.2m delivery hose, manual poly trigger (with trigger lock)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 100L (12V) DIESEL TRANSFER CADDY

Tapered bolt on tines manufactured to the highest quality standards, pierces easily into tight silage.
Straight Conus II with coned nut.
Cat 1 linkage with Cat 2 bushes.
Lift capacity of 1,000kg evenly loaded.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS SILAGE FORK 980MM LENGTH - 0290

Square Hay Tine (Conus I) OD 1 7/16" (36.51mm). 221154 with point.

BURDER 1,400MM SQUARE HAY TINE (CONUS I) (OD 1 7/16" / 36.51MM)

Farm Aid dolomite/fertilizer droppers are entirely Australian products, designed and manufactured by our team here in Coopers Plains from Australian Materials.
No corners have been cut in their construction. They are built to serve and built to last.
Features:
3 Point Linkage mount.
Ground wheel drive.
Adjustable hole openings and agitator to ensure free flow of fertilizer and lime.
Models:
8ft Hopper (Large) Capacity (50kg bags) 18-20 Bags
Drawbar Only to suit above models
Optional trailing models available to order.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

FARM-AID DOLOMITE / FERTILIZER DROPPER - 8FT - FARM AID - FA853

Find Farm Machinery For Sale in Coopers Plains. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

JOHN BERENDS 8FT PASTURE HARROWS - 0403

JOHN BERENDS 3.6M S-TINE (36 TINES) STANDARD CULTIVATOR - MIN 72HP

SUREWELD 2.1M FOLDING CLIMAXX LOADING RAMP FOR ATV

ROTECH RURAL 20MM ENCLOSED HANDLE LONG PIN CAM LATCH (MULTIPOSITIONAL) - ECL20L

SUREWELD 2,850KG PAYLOAD MINI EXCAVATOR TRAILER WITH 3,500KG A.T.M AND 620KG TARE

SILVAN 3,500L (3 ROW) TRAILED SCRAM CROSS - MIN 80PTO HP

POLYMASTER 3,000L RAINWATER TANK & GARDEN PUMP (SLIMLINE)

SUREWELD 3.3M, 3,000KG CAPACITY CLIMAXX RUBBER SERIES LOADING RAMP

SILVAN 100L (12V) DIESEL TRANSFER CADDY

JOHN BERENDS SILAGE FORK 980MM LENGTH - 0290

BURDER 1,400MM SQUARE HAY TINE (CONUS I) (OD 1 7/16" / 36.51MM)

FARM-AID DOLOMITE / FERTILIZER DROPPER - 8FT - FARM AID - FA853

Farm Supplies Machinery & Equipment

Dealer Address