Farm Supplies Machinery & Equipment

Strong, Long Lasting Gate Pin 27mm.
Looking for an easy to install and strong bottom pin for your gate? Our zinc plated nylon gudgeons allow you to firmly secure your farm gate.
Our 25NB nylon gudgeons suit most popular farm gate sizes. It can be welded or bolted on to the bottom of your post, ready for you to sit your gate on top.
The hinge is made up of a nylon gudgeon, rather than a steel pin.
This gives a long lasting smooth swinging gate.
These nylon gudgeons are zinc plated to allow for ease of welding onto the steel post, yet still maintain a solid rust resistant coating. The backing plate has a hole above the pin and a hole below; this is a slightly stronger configuration compared to that of the long plate gudgeons, which has both holes above the pin.
Paired with a top saddle, you can expect a smooth gate swing.
Price quoted is for one pin.
Discounts apply for bulk purchases of 10+
Contact dealer for bulk pricing.
Specifications:
- 25NB gate
- 27mm pin
- Zinc plated
Features:
- Strong
- Weld on
- Bolt-on
- Long lasting
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

ROTECH RURAL BOLT-ON GUDGEON WITH BUSH 25NB -BOG25

Based on simple but strong designs, the post driver runs off a single set of remote hydraulics.
No plumbing in the back axle is required. Compared to most brands, the design is almost frictionless resulting in a virtually free falling weight with a greater pounding force. As a result, a lighter weight can be used. Suits a range of post sizes from star pickets to strainer posts.
Overall weight approx 620kg
Overall height 3.9m
Requires tractor with one set of hydraulic remotes and 12 volt supply.
Also Available:
0266 Post Driver with Double Bank Hydraulic Control Valve Lift & Tilt
0268 Post Driver with Triple Bank Hydraulic Control Valve Lift, Tilt & Fore/Aft
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS POST DRIVERS WITH SINGLE BANK HYDRAULIC CONTROL VALVE - 0263

4.19m Murray Series 03 Levelling Harrow 4 Rank Deep Sections & Standard Drawbar, Light Duty. Complete Set.
3509 - 4.19m (13ft 9in)(20Row) 2/12 Tine, 3/16 Tine - 80kg.
Murray Levelling Harrows are an excellent choice to complement sowing or cultivation implements. Designed to level soil and seedbeds, the flexible frame design provides durability in all soil types. 3 and 4 rank versions are suitable for use to cover seed in light to medium soils in conjunction with combines and seed drills. The 5 rank model is used in heavier soils to counter weed growth and break down large clods. It is a popular implement that complements cultivators, scarifiers or chisel plows.
If you require additional weight to work your land, a Heavy version of our Series 03 Levelling Harrows is available. Made from heavier High Carbon Steel, the Tine Spacing remains the same as the standard version.
The Series 03 Levelling Harrow is available in either 3 or 4 row widths allowing extensions in increments of 235mm (9 ¼) to suit primary machines of almost any width. This allows a combination of harrow sections to be configured to suit your application.
A full range of standard and heavy duty drawbars are available to correctly match your soil conditions and available working width of your equipment. Harrow sets complete with drawbars range from 2.31m (77) to 5.58m (184) in width.
Specifications:
- Tine Spacing 76mm (3in).
- Tine Length 190mm (7 1/2in) approx.
- Centre to centre of Front Hooks 235mm (9 1/4in).
Features:
- High Carbon Cut Tines.
- Light models manufactured from 25 x 6mm carbon steel and Heavy models from 32 x 6mm.
* Murray Harrows must be pulled (towed) by a tractor correctly fitted with an approved rollover protection structure. Murray Harrows are NOT intended for use with an ATV or Ride On Lawn Mower.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

The two-hole straining plate increases efficiency at every running post and corner in your fence-line. It serves two main functions: (1) to allows the wire to be quickly strained at running posts & corners without tying a knot and (2) to preserve 100% of the wire strength. No knot means no weakness in the wire, and it works on both plain and barbed wire.
In over 5 years of use there hasn't been a single wire slip.
(Tek Screws NOT included, but can be added to order). Simply attach and tighten it over the wire with two tek screws (14 gauge, 3/8 drive x 25mm) and you have a solid grip on the wire. Avoid over-tightening your tek screws.
Note: These are designed to replace knots along the line, where there are multiple running strainer posts. They don't replace your normal termination knot at both far ends of the fence.
Options:
- Two Tek Screws Per Two Hole Plate
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available
Contact Farm Supplies today for sale or more information
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WALTERS FENCING TWO-HOLE STRAINING PLATES (BOX OF 50)

Features:
120 HP multi speed gearbox with rear PTO (540 RPM).
2080mm working width.
48 x L blades total.
Side gear drive.
CE safety guards.
Floating front hitches.
1 3/8in 6 spline PTO with slip clutch.
Specifications:
Model Code: B123V-205
Connection Type: Linkage
Min Tractor PTO HP: 60-120 HP
Working Width (mm): 2080
Working Depth (mm): 100-250
Product Weight (kg): 700
Total Width (mm): 2270
Specifications with Optional Cage Roller
Product Weight (kg): 860
Options:
Front Depth Wheels
Pair of Side Discs
Wheel Track Eradicator
Note: An additional surcharge applies for machinery assembly.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

BREVIGLIERI 2.08M B123 ROTARY HOE (MIN 60-120HP)

Rippers enable you to do a lot of hard work with minimum effort. Ideal for breaking up hard ground, ripping up stumps or rock, planting trees, laying polythene pipe or removing rabbit warrens.
The ripper should be run through the ground prior to pipelaying to ensure there are no obstacles, and the required depth can be maintained. The pipelayer is easy to take on and off for this reason. Pipelayer takes 50mm Poly Pipe. The pipe is usually rolled out next to the hole either over the tractor or with a second person feeding it from the side.
Specifications:
Designed for tractors over 60hp (Cat 2 linkage).
150 x 50 Billet.
Reversible point.
225mm x 75mm x 16mm.
Weight: 100kg.
Max. working depth: 700mm.
Pipelayer takes 50mm pipe.
Both items can be purchased individually.
0021 Heavy Duty Single Tine Ripper, 150 x 50mm tine, Cat 2
0022 Pipelaying attachment
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS HD SINGLE TINE RIPPER AND PIPELAYER - 0021-0022

Made in Europe
Features:
- Self-loading design, simply scoop and mix
- Hydraulic opening at bottom with unloading pipe
- Safety grill with built-in bag breaker
- Incredible European build quality
- Includes electric control kit, hoses and couplings
- Centre Discharge
Dimensions:
Width = 1,900 mm
Flow Range = 50-90 LPM
Full Capacity = 600 L
Full Weight = 2,070 kg
Empty Weight = 630 kg
Other capacities also available - 200L, 250L 350L & 450L. See picture/s for confirmation of those versions.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH CONCRETE MIXER BUCKET (600L)

Trailed over row 2,000 litre turbo Scram 2 row turbowrap sprayer with 4 x 320mm fans, 350 L/min hydraulic drive stainless steel pump, automatic spray rate controller, self contained hydraulic drive system and tandem suspension axle.
Specifications:
Market: Viticulture.
Tank Size (L): 2,000
Connection Type: Trailed
Min PTO HP: 60
Pump Size (L/min): 350
Height / Width / Length (mm): 3330 / 1800 (less head), 2490 (folded) / 4680
Product Weight (kg): 990 (dry)
Application: Vineyards
Features:
Head: Two row spraying head: 28 venturi air shear adjustable nozzles with individual metering and on/off taps. Three row spraying head: 42 venturi air shear adjustable nozzles with individual metering and on/off taps. Left & right arms are independent hydraulic folding with adjustable width & centre frame. Boom frame is galvanised.
Pump: Stainless steel, hydraulic drive centrifugal pump, 350 L/min. Stainless steel shaft and Viton/ceramic seal. Driven by tractor remotes.
Fan Size: 320 mm turbine fan, one per air tube, 3600 rpm. Power consumed 29 kw / 38HP
Hydraulic Control: Hitch mounted hydraulic power pack with; 40L oil reservoir with cartridge particulate filter, motors fitted with case drain, hydraulic distribution block incorporates anticavitation and pressure relief valves, 12V oil cooler
Nozzles: Air shear.
Controls: Electric section valves with Bravo 180S automatic rate controller. Large 100mm pressure gauge.
Frame: Galvanised steel chassis, linkage hitch fitted with hydraulic power pack
Tank: Polytuff impact resistant polyethylene construction, calibrated sight line, flip top easy open lid, 50mm camlock bottom fill and 40L fresh water tank
Agitation: Venturi agitator.
Filtration: Lid strainer and large capacity suction filter.
Wheel Equipment: Tandem suspension axle with 10 x 15" tyres (1500L & 2000L) or 11.5 x 15.3" tyres (3500L).
PTO Driveshaft: Quality Bondioli & Pavesi driveshaft with quick release pins and safety cover.
HP Required: Minimum 60 PTO HP (2 row), Minimum 80 PTO HP (3 row).
Options:
- Bravo 180S spray rate controller with hydraulic controls (in lieu) (J99-180)
- IBX 100 ISOBUS controller (in lieu - requires compatible in-cab console) (J99-181)
- Hydraulic row width/height adjustment
- Hydraulic pump driven through power pack (D99-185)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SILVAN 2,000L (2 ROW) TRAILED TURBO SCRAM TURBOWRAP - MIN 60PTO HP

Heavy duty trailing tandem disc plough designed for heavy cultivation in hard conditions. The angle is hydraulically adjusted and has a transport width of under 2.4m.
Features:
Available in 28, 32, 36, 40, 44 and 48 plate models at 9 inch disc spacing's.
Fitted with 24 inch x 6mm or 26 inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame, to be under 2.4m overall width.
Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required.
Solid cast of spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than in the main frame. Each is individually machined to suit the disc for extra strength.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Buster tine removes centre ridge to create a level finish.
Integrated furrow fillers are standard.
Fitted with four Land Cruiser wheels on a 5 tonne axle. Hydraulic wheel lift is standard.
40mm square high tensile gang bolts.
Fully adjustable drawbar height with parallel lift for better transportation.
Wheelkit locking arms reduce stress on the hydraulics when transporting.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Australian made Eaton cylinders.
Prong type scrapers are standard formed scrapers on request.
Parking jack is standard.
Specifications:
Approx Weight: 3500kg
No. of Bearings: 16
No. of axles: 8
Cutting width: 3.88m (12ft 9inch)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

Picket post driver - Steer Standard.
Marchant Engineering has been manufacturing the Air Driven Picket Post Driver here in Australia since 1987, helping farmers and fencing contractors to build long strained fences in record time. It will drive star posts through bitumen, shale and black soil surfaces as well as ironstone and sandstone.
This air tool has proven its worth in the harsh terrain of Australia, New Zealand, South Africa, UK and now USA were in Texas it is the only hand held tool powerful enough to drive oil pipe into broken limestone, turning a job that took 4 hours per post into a job that takes 12 minutes per post.
It is performance like this and the Driver's versatile size that has made it the perfect tool for a wide range of fencing projects, like temporary fencing for construction sites, putting in roadside reflector posts on highway projects and security fencing for US air force bases in Afghanistan.
Features:
- 54mm Guide
- 2x50mm Dolly
- Stand air fittings
Air Supply required for the driver:
- Farmer minimum of 17cfm - 5.5hp
- Contractor minimum 38cfm-11hp
Air Hose sizes available at extra cost:
- 1/2inch - 20 metre roll
- 1/2inch - 50 metre roll
- 1/2inch - 100 metre roll
Options Extras available:
- Striking Dolly - There are 2 dolly's in the box with the driver. A dolly will fatigue between 5,000 to 15,000 posts depending on the type of ground and how the driver is used. Farmers will probably never need another dolly while contractors will break them after continual use. It is advisable to always have a spare dolly so you can continue to use the driver if you break a dolly.
- Chisels
- Bead Breaker
- Drive Kits
- Guides - The standard guide supplied is 54mm. Additional guides are available from 56mm to 145mm bore.
- Plugs to suit 2", 3", 4" and 5" pipe.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

MARCHANT ENGINEERING PTY LTD PICKET POST DRIVER - STEER STANDARD

The RM80 offset disc cultivating plough is similar to the RM75 with the main difference being in the greater number of bearings and shorter axles in the disc gang assemblies.
Features:
Ideal for primary and secondary tillage for 75-165 HP tractors.
Fitted with 26inch x 6mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure.
Fitted with two 11×16 flotation wheels on a 5 tonne axle. Hydraulic wheel lift is standard. All models fitted with 8inch Australian made Eaton Rams.
40mm square high tensile gang bolts.
Single pressure screw can be adjusted to transfer weight to the rear of the cultivator, resulting in even disc penetration. Option of fixed or floating position.
Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile O rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing.
Fully adjustable drawbar.
Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather than the main frame. Each is individually machined to suit the disc for extra strength.
9 inch disc spacing.
Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi.
Prong type scrapers are standard formed scrapers available on request.
Parking jack is standard.
Optional furrow fillers available.
Specifications:
Approx Weight: 1970kg
No of bearings: 12
No of axles: 6
Cutting width: 2.74m (9ft)
Options:
0953 Optional Furrow filler (not sold separately)
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 26 INCH 6MM SCALLOP DISCS - 0871, SUIT 75-165HP

Made in Australia
Features:
- Heavy duty singular grapple arm
- 115 mm tyne spacing's
- Inc hoses, fittings & couplings
- Rock solid design for extreme duty applications
- 40 x 40 mm high tensile solid bar tynes
- Greasable pivot points
Dimensions:
Suits: 80 - 180 hp
Max Opening = 1,100 mm
Tyne Spacing's = 115 mm
Max Width = 2,400 mm
Weight = 850 kg
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available.
Contact Farm Supplies today for sale or more information.
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

HIMAC EURO HITCH SINGLE CLAW POWER GRAPPLE (2.4M)

Find Farm Machinery For Sale in Coopers Plains. Browse 7607 listings from Farm Supplies Machinery & Equipment.

New & Used Farm Machinery For Sale in Coopers Plains

Farm Supplies Machinery & Equipment

Sale Price

ROTECH RURAL BOLT-ON GUDGEON WITH BUSH 25NB -BOG25

JOHN BERENDS POST DRIVERS WITH SINGLE BANK HYDRAULIC CONTROL VALVE - 0263

MURRAY SERIES 03 LEVELLING HARROW 4.19M, 4 RANK DEEP SECTIONS & STD DRAWBARS-LIGHT DUTY-COMPLETE SET

WALTERS FENCING TWO-HOLE STRAINING PLATES (BOX OF 50)

BREVIGLIERI 2.08M B123 ROTARY HOE (MIN 60-120HP)

JOHN BERENDS HD SINGLE TINE RIPPER AND PIPELAYER - 0021-0022

HIMAC EURO HITCH CONCRETE MIXER BUCKET (600L)

SILVAN 2,000L (2 ROW) TRAILED TURBO SCRAM TURBOWRAP - MIN 60PTO HP

JOHN BERENDS TH100 HD TRAILING TANDEM DISCS - 32 PLATE X 26 INCH DISCS - 0961

MARCHANT ENGINEERING PTY LTD PICKET POST DRIVER - STEER STANDARD

JOHN BERENDS RM80 HD TRAILING OFFSET 24 PLATE 26 INCH 6MM SCALLOP DISCS - 0871, SUIT 75-165HP

HIMAC EURO HITCH SINGLE CLAW POWER GRAPPLE (2.4M)

Farm Supplies Machinery & Equipment

Dealer Address