Farm Supplies Machinery & Equipment

Powertech Honda Post Hole Digger V3 (100mm & 250mm Dual Spiral Augers included)
Post Hole Digger V3 - Honda GX50 4-Stroke
The Powertech-designed and built unit is commercial grade and a must have for any tradesmen, commercial operator or DIYer. Built for Australian conditions, this unit has had numerous hours in the hands of fencing contractors, builders and farmers who seriously test its capabilities. In the end, it stands alone in the class of Post Hole Diggers. Designed tough and rugged with a wide set frame to give the operator leverage and allowing the unit to dig even in the hardest of grounds, if you are in the market for a serious Post Hole Digger, you can't surpass the V3!
This unit makes the time-consuming and challenging job of digging holes quicker and easier so minimize the back-breaking work while also increasing your efficiency and with features like the external safety clutch lever gearbox it makes handling the machine a breeze if you were to strike any foreign objects hidden in the earth.
Powered by a genuine Honda GX50SSE4 4-Stroke engine - We chose the Honda GX50SSE4 (Side Exhaust) because of it's specially designed exhaust port which prevents exhaust gas inhalation. Our machines are designed with safety in mind by positioning the exhaust port at the furthest point from the operator and ejecting exhaust gases parallel to the ground and directly opposite the operator. Honda's GX50 general-purpose engine expands our Mini-Four Stroke line up with a model that offers high output and outstanding performance. Capable of performing in demanding commercial and rental applications with excellent fuel efficiency and reliability. The GX50 is the first Honda four-stroke model in the two-horsepower class that is 360-degrees inclinable during operation and storage.
Specifications:
- The Rolls Royce of Post Hole Diggers.
- Rigorously tested in Australian conditions.
- Ideal for Landscaping, Fencing, Builders and Farming.
- Powered by the Genuine Honda GX50SSE4 4-Stroke engine. Max Power: 1.47kw@7000rpm 2.2Nm@5500rpm
- Heavy-duty commercial-grade gearbox.
- Single or dual-person operation.
- External safety clutch lever gearbox to avoid dangerous auger lockup.
- 360-degree inclinable operation.
- Comfortable rubber hand grips.
- Multiple dual spiral auger sizes are available 80mm, 100mm, 150mm, 250mm & 300mm.
- Optional shaft extensions 300mm, 500mm and 1000mm.Tungsten replaceable tips
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POWERTECH 4 STROKE HONDA POST HOLE DIGGER V3 INC 100MM & 250MM AUGERS

The ultimate way to eradicate unwanted and noxious weeds along with other parasites without using potentially dangerous chemicals.
With a core temperature of 1090 degrees Celsius, it destroys top growth weeds, seeds and harmful bacteria thereby sterilising the soil and leaving a potash rich residue for future plantings.
It is used for sterilising seed beds prior to planting, and for ground clearing under trees and fences, and is great for inter-row weeding. A separate trolley hood is available as an option.
It can also be used around the home as weed control for weeds that pop up between pavers and concrete. Other uses for the flame gun are killing off lice and mites in chook sheds and also destroying rotting fruit on the ground to reduce fungal and potentially harmful spore germination.
Options for the Flame Gun Include:
- Trolley
- Hood (Perfect for viticulture)
Specifications:
Weight - 6 kg
Dimensions - 69 × 19 × 22 cm
Frequently Asked Questions:
1. How soon can I get my results?
When using the flame gun for the first time, never attempt to consume all the weed in one burning. The two stage method is recommended.
Stage 1: A 1090C controlled flame kills weeds. When directed at the base of weeds it stops sap rising, so the top growth dries out in a day or two.
Stage 2: Dry weeds will ignite immediately when the flame comes into contact, clearing the ground of vegetation's, seeds, pests etc.
2. Can I clear bush?
For the clearance of bushes, tangled vines, hedges etc, it is recommended to cut the growth as near to the ground as possible. Allow it to stand and dry out for at least 24 hours.
One burning will then consume the cut bush and kill the roots and seeds at the same time.
3. Can I start a bush fire?
As the flame gun is operated at 1090C the weeds that are in contact with the flame burn instantly and therefore there is nothing left to continue combusting.
The Flame Gun weighs only 7.5kg when fully filled with Kerosene. Its ergonomic design makes it easy to carry and operate.
See it in action:
How to use the Flame Gun: https://www.youtube.com/watch?v=NT31ozn0Zq8
Care for the Flame Gun: https://www.youtube.com/watch?v=h2Pz7I1_mSw
Instruction Manual: https://farmsuppliesmachineryandequipment.com.au/wp-content/uploads/2021/05/Sheen-X300-Instruction-Leaflet.pdf
- https://www.abc.net.au/gardening/factsheets/bold-and-the-beautiful-retford-park/13343422
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHEEN X300 SHEEN FLAME GUN - FOR WEEDS & OTHER PARASITES

The Hand Powered Wire Winder is a compact light weight solution to winding up an old fence wire or temporary electric fencing wire. The Winder can be used to wind up plain wire or barbed wire and the finished coil is easily removed on completion.
This is a great piece of kit for those small jobs or space where terrain imposes limits on access by larger machinery. The winder can be used to pull up single wires or several wrapped together. The outside frame detaches easily for removal of the coils, and cut-outs in the frame enable you to tie off the roll neatly.
Everything you need to retrieve your old fencing wire is included right here in this kit.
- Blue Hand Powered Wire Winder and universal X-Mount bracket
- Towbar Mount with adjustable height and hitch clamp
- Wire Guide
Re-use of plain fencing wire is possible as the internal diameter of the recovered rolls are a nominal 600mm, which is compatible with most wire spinners. Recovered barbed wire will need to be dispensed by hand.
Barbed wire capacity: 400m Iowa, 500m high tensile. Distance you can comfortably roll in one section: 50-100 metres.
Plain wire capacity: 1500-2000 metres 2.5 high tensile, 600-800m 4.0mm 'Number 8'. Distance you can comfortably roll in one section: 100-200 metres however we have rolled 600 metres ourselves. General rule of thumb - if you can pull the wire by hand you can wind it comfortably.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

WALTERS FENCING HAND POWERED WIRE WINDER

Spring Balance - Can lift up to 22kg - Ideal for Picket Post Driver.
Now you no longer have the weight of the Picket Post Driver slowing you down as the Spring Balance attachment can lift the Picket Post Driver on and off posts in conjunction with a ute crane.
Features:
- 15-22KG Adjustable Spring Balance
- Comes set to 15kg
- Has 1.3 metre cable travel
- Includes Picket Post Driver lift bracket
- Ideal for both fencing contractors and farmers
- The wire rope is protected by winding onto an aluminium scroll
- Is used in conjunction when heavy drive kits are attached
- 12 month warranty
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MARCHANT ENGINEERING PTY LTD 22KG SPRING BALANCE- IDEAL FOR PICKET POST DRIVER

Milky butter churns are the best home-produce churns available today. This churn is manually operated, with a substantial and comfortable crank handle. It is most suitable for home use, making 1-4L of cream into butter in about 20 minutes (depending on crank input).
The viewing lid is large to enable good control of the process. Drain tap.
Full instructions for use included.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

MILKY 4L MANUAL BUTTER CHURN

Calf Puller Vink Calving Jack - Standard Model - Complete.
The world-wide best selling calving aid from Europe. Hangs-on to the cow whether she is standing or goes down in the middle of the job.
The permanently attached holding frame fits over the cow's hip bones, acting as a steady and fixed base from which the Calving Jack tilts and pulls regardless of whether the cow stands, sits or stretches out.
This calf puller was developed after extensive institutional research into the forces required for the safest and most humane birthing assistance.
All stainless steel. Standard pole is 1.6m long and long pole 1.8m long.
The long pole will fit the standard model Calving Jack. Rump frame 51cm wide (inside measurement).
* Replacement ropes available.

All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

SHOOF CALF PULLER VINK CALVING JACK STANDARD MODELCOMPLETE

Powertech Honda Post Hole Digger V1 (100mm & 250mm Dual Spiral Augers Included)
The Powertech Post Hole Digger V1- This PTM designed and built unit is commercial grade and a must have for any tradesmen, commercial operator or DIYer. Capable of creating holes from 80mm through to 300mm for multiple applications including general construction, fencing, tree planting, sign installations, retaining walls, plumbing and more.
This unit makes the time-consuming and challenging job of digging holes quicker, easier and minimizes the back-breaking work while also increasing your efficiency on the job. This model includes an internal safety clutch gearbox which will assist in preventing Auger lock-up.
Built for Australian conditions, this unit has had numerous hours in the hands of fencing contractors, builders and farmers who seriously test its capabilities.
Powered by a genuine Honda GX50SSE4 4-Stroke engine - The Honda GX50SSE4 (Side Exhaust) was chosen because of it's specially designed exhaust port which prevents exhaust gas inhalation. Our machines are designed with safety in mind by positioning the exhaust port at the furthest point from the operator and ejecting exhaust gases parallel to the ground and directly opposite the operator. Honda's GX50 general-purpose engine expands our Mini-Four Stroke line up with a model that offers high output and outstanding performance. Capable of performing in demanding commercial and rental applications with excellent fuel efficiency and reliability. The GX50 is the first Honda four-stroke model in the two-horsepower class that is 360-degrees inclinable during operation and storage.
Specifications:
- Rigorously tested in Australian ground conditions.
- Light-weight compact design
- Ideal for Landscaping, Fencing, Builders and Farming.
- Powered by the Genuine Honda GX50SSE4 4-Stroke engine.
- Heavy duty commercial grade gearbox.
- Internal Safety Clutch
- Single-person operation.
- Max Power: 1.47kw@7000rpm 2.2Nm@5500rpm
- 360-degree inclinable operation.
- Comfortable rubber hand grips.
- Multiple dual spiral auger sizes are available 80mm, 100mm, 150mm, 250mm & 300mm.
- Optional shaft extensions 300mm, 500mm and 1000mm.
- Tungsten replaceable tips
- Unit weight: 17kg with 250mm auger fitted.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE

POWERTECH HONDA POST HOLE DIGGER V1 INC 100MM & 250MM AUGERS

As used on Selecta foam markers. Ideal for high volume, low pressure foam making application.

SILVAN 12V HEAVY DUTY COMPRESSOR (38L / MIN)

Post Hole Digger Augers - 350mm (13.8") Auger
Post Hole diggers will not work properly without a good quality properly designed Auger.
Daken Post Hole Digger Augers are built around a heavy main shaft, with think flighting, and heavy duty auger heads.
The flighting has the best geometry to not clog and clear the soil.
Features:
- 6mm flighting
- Replaceable teeth
- Replaceable centre point
- Fits 2 round output shaft
Not suitable for Little Ripper Digger
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN POST HOLE DIGGER AUGERS - 350MM (13.8") AUGER - 81215DC

Use for creating back-burns for fire control, also for burning cane and other vegetation.
Lightweight welded aluminium body
Simple and quick to operate
Gravity feed
No blow-back
Spares available
A well-proven product
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

FIREBUG 4LT FIREBUG DRIP TORCH - FIXED LANCE - FIREBUG - FCT1

Race Type Footrot Bath

Make the prevention & treatment of footrot disease an easy task!

- This race type footrot has an end to end linking feature that is ideal for placing in a sheep race
- Nonslip ridges on floor open the hoof to increase chemical penetration
- Lightweight for easy handling & cleaning
- Manufactured from UV stabilised polyethylene, does not rust or corrode
- V-sides to prevent stock from removing their hooves from the chemical

RAPID PLAS 240L FOOTROT BATH (WIDE)

Range up to 100km of fence.
Suitable for all livestock and feral animal control.
The MBT100 Plus is an electric fence energiser designed & tested for large permanent agricultural electric fences & to meet the most demanding of electric fencing environments. As such it has been built tough, with more raw power ability than most units on the market today
Features:
- Peak Output Voltage 8.8KV
- 17 stored joule performance
- Standard high tech telemetry
- Reading output voltage
- Load fact
- A.C. adaptor
- Low battery warning
- Overload indicators
- 13.5 Volts input voltage
- Average Current 1100 mA
input Power 15 Watts and includes Battery Leads
Designed, Assembled, Tested and Serviced in Australia.
All prices include GST. Please allow extra for freight.
Delivery is available Australia Wide.
Dealer enquiries welcome.
Finance is now available!
Contact Farm Supplies today for sale or more information!
Photos are for illustration only, and actual product may vary from those shown.
Prices are correct at time of posting the ad, but are still subject to change.
E & OE.

DAKEN MT100 MAINS ELECTRIC FENCE ENERGISER 240V- 70508D

Find Farming Other For Sale from $500 to $2,000. Browse 103 Farming Other listings from Farm Supplies Machinery & Equipment.

Farming Other For Sale from $500 to $2,000

Farm Supplies Machinery & Equipment

Sale Price

POWERTECH 4 STROKE HONDA POST HOLE DIGGER V3 INC 100MM & 250MM AUGERS

SHEEN X300 SHEEN FLAME GUN - FOR WEEDS & OTHER PARASITES

WALTERS FENCING HAND POWERED WIRE WINDER

MARCHANT ENGINEERING PTY LTD 22KG SPRING BALANCE- IDEAL FOR PICKET POST DRIVER

MILKY 4L MANUAL BUTTER CHURN

SHOOF CALF PULLER VINK CALVING JACK STANDARD MODELCOMPLETE

POWERTECH HONDA POST HOLE DIGGER V1 INC 100MM & 250MM AUGERS

SILVAN 12V HEAVY DUTY COMPRESSOR (38L / MIN)

DAKEN POST HOLE DIGGER AUGERS - 350MM (13.8") AUGER - 81215DC

FIREBUG 4LT FIREBUG DRIP TORCH - FIXED LANCE - FIREBUG - FCT1

RAPID PLAS 240L FOOTROT BATH (WIDE)

DAKEN MT100 MAINS ELECTRIC FENCE ENERGISER 240V- 70508D

Farm Supplies Machinery & Equipment

Dealer Address